Audi A4 Avant 1.9 TDI Quattro

Drivetrain parts and components for Audi A4 Avant 1.9 TDI Quattro. Filter by make, model and engine to confirm correct fitment before ordering.

Products for Audi A4 Avant 1.9 TDI Quattro

54 products
49 - 54 of 54
Item no.:0696354
  • Total length: 122 mm
Item no.:0671265
  • Total length: 113 mm
Item no.:0913918
  • Inner diameter: 24 mm
  • Outer diameter: 40 mm
Item no.:1101671
  • Splines wheel side: 38
  • Total length: 595 mm
  • Joint diameter, gearbox side: 123 mm
  • Seal ring diameter: 59,5 mm
  • Thread size: M16x1.5
Item no.:2138949
  • Splines wheel side: 38
  • Total length: 620 mm
  • Joint diameter, gearbox side: 123 mm
Showing 49–54 of 54 products

Audi A4 Avant 1.9 TDI Quattro drivetrain parts

The Audi A4 Avant 1.9 TDI Quattro represents an exceptional balance between fuel efficiency and Audi's legendary Quattro four-wheel-drive system. To maintain the performance and safety this setup delivers, top-quality components are vital across the entire transmission system. The drivetrain on this specific model handles substantial stress, especially with the robust low-end torque provided by the 1.9 TDI engine. Here at CVJoint24, you will find a curated selection of components engineered specifically for your vehicle. We understand how crucial it is that every link in the chain, from gearbox to wheel hub, operates flawlessly to ensure optimal grip and driving dynamics on every road.

Our product range for this estate covers thoroughly selected components, ensuring you find exactly what you need to restore your car's reliability. As specialists in All car makes drivetrain components, we focus on delivering parts that meet the rigorous demands of four-wheel-drive vehicles. Selecting the correct replacement parts not only prolongs your vehicle's lifespan, but also ensures that the intelligent power distribution of the Quattro system performs exactly as intended from the factory.

How the Audi A4 Avant 1.9 TDI Quattro drivetrain works

The drivetrain architecture on an Audi A4 Avant 1.9 TDI Quattro is technically sophisticated, linking both front and rear axles through a permanent four-wheel-drive layout. Power is transferred from the longitudinally mounted engine through the gearbox to a central differential. From there, a prop shaft sends power back to the rear axle, while the front axle is driven directly via integrated outputs within the gearbox casing. This layout ensures the balanced, symmetrical power delivery that defines Audi engineering.

At the front, drive shafts handle both propulsion and steering input, placing immense demands on the outer CV joints, which must operate smoothly even at acute steering angles under heavy load. The rear drive shafts focus purely on transferring power from the rear differential to the wheels. The entire system relies on all components remaining in peak condition, including the inner and outer constant velocity joints and the centre bearing on the propeller shaft. Even minor imbalance or wear can cause vibrations throughout the entire chassis, compromising ride comfort and accelerating mechanical wear over time.

Common faults and symptoms

Several distinct symptoms indicate that drivetrain components on your Audi are failing. One of the most typical signs is a rhythmic clicking sound on full steering lock during acceleration, almost always pointing to a worn outer CV joint. This often stems from a cracked CV boot, allowing grit to enter and grease to escape, which rapidly destroys the joint's precision-machined bearing surfaces.

Vibrations occurring specifically under acceleration that fade away as soon as you lift off the throttle frequently indicate a worn inner CV joint. For Quattro drivers, it is equally important to listen for vibrations beneath the centre of the vehicle, which typically point to failing U-joints or a worn centre bearing along the prop shaft. Another frequent issue is a cracked ABS reluctor ring, caused by rust expanding beneath the ring. This causes the ABS to pulse unnecessarily at low speeds or triggers the ABS warning light on your dashboard as the wheel speed sensor loses its clean signal.

Common replacement parts for the Audi A4 Avant 1.9 TDI Quattro

For the Audi A4 Avant 1.9 TDI Quattro, we have highlighted the key parts most frequently required to maintain original handling and reliability. Our stock covers all vital power transmission needs for this exact model. Below is an overview of what we supply:

  • Drive shafts: We stock multiple drive shaft variants to suit both front and rear axles as well as various gearbox combinations.
  • CV joints: We offer both outer and inner CV joints, providing complete coverage for every position on your vehicle.
  • Propeller shaft: Dedicated prop shafts manufactured to match the exact length and mounting points of your Quattro system.
  • ABS rings: 2 precision-engineered ABS rings, essential for restoring correct vehicle safety system operation.

All parts are precision-engineered to meet or exceed original equipment specifications. This is particularly vital on an all-wheel-drive vehicle, where strict mechanical tolerances across all axles protect the differentials against unnecessary wear.

How to find the correct parts for your Audi A4 Avant 1.9 TDI Quattro

Navigate directly to the required component section for your Audi A4 Avant 1.9 TDI Quattro:

When diagnosing drivetrain issues on a four-wheel-drive car, starting in the correct category saves valuable time. By comparing the exact component sections for the Audi A4 Avant 1.9 TDI Quattro, you can easily distinguish between drive shaft, CV joint or propeller shaft faults and proceed straight to the products that match your symptoms and technical specifications.

Selecting the right spare part for an Audi A4 Avant can require care, as specifications vary depending on chassis number, production date, and whether the car features a manual or automatic gearbox. The most dependable method to browse our catalogue is by choosing your vehicle make, model and engine variant. This instantly filters the catalogue to display components that are directly compatible with your car's configuration.

Before finalising your order, we recommend checking technical details such as tooth counts on the ABS ring or overall driveshaft length, as these measurements can differ. Ordering from a dedicated driveline specialist minimises the risk of incompatible parts and ensures your Quattro drivetrain performs reliably. Our vehicle database is continuously updated to ensure dependable fitment guidance, giving you total peace of mind during installation.

Why buy from CVJoint24?

CVJoint24 is the international shop of a Swedish driveline specialist based in Helsingborg, Sweden, dedicated to vehicle driveline systems. Unlike generic car-parts sellers, we offer deep technical knowledge and a product range solely focused on power transmission. When you buy components for your Audi A4 Avant 1.9 TDI Quattro from us, you receive high-grade replacement parts backed by our comprehensive fitment guarantee. We know how critical it is to get the correct part first time to avoid unexpected garage delays.

We dispatch quickly across Europe from our central warehouse so you can get your car back on the road without delay. Our quality focus means we partner exclusively with trusted manufacturers adhering to strict OE standards, built to withstand harsh winter roads and heavy road salt. Trust CVJoint24 for expert support, swift delivery and the exact parts your Audi requires.

Frequently Asked Questions about the Drivetrain for Audi A4 Avant 1.9 TDI Quattro

How do I know if my Audi A4 Avant 1.9 TDI Quattro needs a new drive shaft?

The most common signs are heavy vibrations under acceleration or unusual noises from the underside of the car. If you find that a CV joint is completely worn out or the shaft has suffered mechanical damage, replacing the complete drive shaft is often the most cost-effective solution.

What is the function of the propeller shaft on a Quattro model?

The propeller shaft is the central link that transfers engine power from the front gearbox to the rear axle differential. On an Audi A4 Avant 1.9 TDI Quattro, it is vital for the four-wheel drive system to function and distribute drive to the rear wheels.

Why does the ABS ring crack on an Audi A4?

This is usually caused by corrosion building up on the CV joint underneath the ring itself. As rust expands, it creates pressure from within that eventually cracks the metal ring, preventing the sensor from reading the wheel speed correctly.

What is the difference between an inner and an outer CV joint?

The outer CV joint is located at the wheel and accommodates both steering angles and suspension movement; when worn, it typically produces clicking noises. The inner CV joint sits at the gearbox and mainly accommodates changes in drive shaft length; wear here usually leads to vibrations.

Can I replace just the CV boot instead of the entire CV joint?

Yes, if you catch a split boot early before dirt has contaminated and damaged the joint's bearing surfaces, you can replace just the CV boot. However, if the joint has already begun clicking or vibrating, it is permanently damaged and must be replaced.

How do I ensure the part fits my Audi A4 Avant 1.9 TDI Quattro?

Select your vehicle's make, model, and engine variant on cvjoint24.com. This is the most reliable way to filter for parts that match the exact specifications of your car's drivetrain and Quattro system.