Audi A4 1.9 TDI Quattro

Spare parts and drivetrain components for the Audi A4 1.9 TDI Quattro. Select your exact make, model and engine to confirm fitment before ordering.

Products for Audi A4 1.9 TDI Quattro

55 products
1 - 24 of 55
Item no.:0386369
  • Position: Front
  • ABS teeth: 45
  • Inner diameter: 77 mm
  • Outer diameter: 81 mm
  • Width: 11 mm
Item no.:0288471
  • Position: Inner
  • Inner splines: 25
  • Joint diameter: 100 mm
Item no.:336578
  • ABS teeth: 45
  • Inner diameter: 77 mm
  • Outer diameter: 81 mm
  • Width: 11 mm
Item no.:1192669
  • Position: Front left
  • Splines wheel side: 33
  • Total length: 596 mm
  • Joint diameter: 98 mm
  • ABS teeth: 45
Item no.:2110701
  • Position: Front right
  • Splines wheel side: 33
  • Total length: 617 mm
  • Joint diameter: 98 mm
  • ABS teeth: 45
Item no.:0452927
  • Position: Inner
  • Inner splines: 34
  • Seal diameter: 130 mm
  • Total length: 59,5 mm
  • Joint diameter: 90 mm
Item no.:0488972
  • Position: Inner
  • Inner splines: 33
  • Seal diameter: 100 mm
  • Total length: 34 mm
  • Joint diameter: 100 mm
Item no.:0593633
  • Position: Outer
  • Inner splines: 30
  • Seal diameter: 53 mm
  • Outer splines: 33
  • ABS teeth: 45
Item no.:0843748
  • Inner diameter: 30 mm
Item no.:629009
  • Position: Rear
  • Total length: 1,149 mm
Item no.:1172033
  • Position: Front left
  • Splines wheel side: 33
  • Total length: 495 mm
  • Joint diameter: 88 mm
  • ABS teeth: 45
Item no.:2146270
  • Position: Front right
  • Splines wheel side: 33
  • Total length: 585 mm
  • Joint diameter: 88 mm
  • ABS teeth: 45
Item no.:0580830
  • Position: Outer
  • Inner splines: 27
  • Seal diameter: 59 mm
  • Outer splines: 38
  • ABS teeth: 45
Item no.:0571433
  • Position: Outer
  • Inner splines: 30
  • Seal diameter: 53 mm
  • Outer splines: 33
  • ABS teeth: 45
Item no.:0691463
  • Total length: 89 mm
Item no.:0507995
  • Position: Outer
  • Inner splines: 27
  • Seal diameter: 53 mm
  • Outer splines: 33
  • ABS teeth: 45
Item no.:0615240
  • Total length: 92 mm
Item no.:1197577
  • Position: Front left
  • Splines wheel side: 38
  • Total length: 595 mm
  • Joint diameter: 98 mm
  • ABS teeth: 45
Item no.:2152809
  • Position: Front right
  • Splines wheel side: 38
  • Total length: 620 mm
  • Joint diameter: 98 mm
  • ABS teeth: 45
Item no.:3171610
  • Position: Front
  • Splines wheel side: 38
  • Total length: 544 mm
  • Joint diameter: 98 mm
  • ABS teeth: 45
Item no.:3153685
  • Position: Front
  • Splines wheel side: 38
  • Total length: 521 mm
  • Joint diameter: 98 mm
  • ABS teeth: 45
Item no.:0299665
  • Bearing thickness: 15 mm
  • Hole spacing c/c: 228 mm
  • Height: 85 mm
Item no.:0208884
  • Total length: 1,565 mm
  • Number of joints: 3
  • Outer diameter 1: 99,7 mm
  • Bolt circle diameter 1: 86 mm
  • Outer diameter 2: 99,7 mm
Item no.:7311241
  • Position: Inner
  • Inner splines: 34
  • Seal diameter: 123 mm
  • Total length: 84 mm
  • Joint diameter: 104 mm
Showing 1–24 of 55 products

Audi A4 1.9 TDI Quattro drivetrain

The Audi A4 1.9 TDI Quattro represents one of the most celebrated combinations in Audi's history, pairing the legendary and fuel-efficient 1.9-litre diesel engine with the sophisticated Quattro permanent all-wheel-drive system. This specific model places high demands on its drivetrain, as the torque from the TDI engine must be distributed efficiently to all four wheels to maximise traction and stability. At CVJoint24, we are specialists in these exact components and offer a range of carefully selected items for this vehicle variant.

Owning a Quattro delivers a superb driving experience, but it also means there are more moving parts in the transmission system that require maintenance. We help you find the right parts to preserve the unique driving dynamics and roadholding that your Audi A4 1.9 TDI Quattro is known for, whether for daily commuting or demanding winter conditions. By maintaining the drivetrain with the correct spare parts, you ensure that the car's performance is sustained for many years to come.

How the drivetrain is built on the Audi A4 1.9 TDI Quattro

The drivetrain of an Audi A4 1.9 TDI Quattro is built around a longitudinally mounted engine coupled to a gearbox with an integrated Torsen differential. This mechanical differential is the heart of the Quattro system, automatically distributing power between the front and rear axles depending on where grip is highest. From the gearbox, power is directed forward to the front wheels via short drive shafts and rearward via a sturdy propeller shaft. At the rear axle, an additional differential distributes power to the rear wheels via the rear drive shafts.

Each individual wheel axle is equipped with CV joints that allow both steering and suspension movement without interrupting power transmission. This complexity means that precision in every spare part is critical; the slightest imbalance in a prop shaft or play in a CV joint can propagate as vibrations throughout the bodyshell, leading to unnecessary wear on expensive components such as gearbox output bearings or differential seals. Understanding this interplay is key to choosing the correct car parts when carrying out repairs.

Common faults and symptoms

Identifying drivetrain issues early can save both time and money. For Audi A4 1.9 TDI Quattro owners, one of the classic signs of wear is a rhythmic clicking noise heard when turning sharply at low speeds. This is a typical symptom of a failing outer CV joint, often caused by a split CV boot that has let in road dirt and allowed the lubricating grease to escape. If you instead experience shaking or shuddering throughout the car under hard acceleration, an inner CV joint is frequently the culprit.

For Quattro vehicles, it is also important to listen for whining or grinding noises from beneath the car, which can indicate issues with the propeller shaft mountings or its centre bearing. Finally, never ignore an ABS or ESP warning light; this is often caused by a defective ABS ring that has lost its magnetic properties or cracked due to corrosion. Being attentive to these symptoms allows you to address issues before they result in complete breakdown on the road.

Common parts to replace on the Audi A4 1.9 TDI Quattro

When it is time to repair your Audi A4 1.9 TDI Quattro, it is vital to select components dimensioned for the vehicle's specific kerb weight and torque output. In our catalogue, you will find the most common components that wear over time. We carry a comprehensive range of parts for this model: different variants of drive shafts to cover both front and rear axles, as well as outer CV joints and inner CV joints precisely matched to the working angles of the Quattro system.

Furthermore, we supply the central propeller shaft unique to the all-wheel-drive system, as well as ABS rings that frequently require replacement due to corrosion from harsh European road conditions. By focusing on these categories, we ensure you find exactly what you need to keep your Quattro as dependable as when it left the factory. Replacing a complete driveshaft can often prove more cost-effective than replacing a single joint, particularly if the shaft itself displays signs of corrosion or imbalance that could compromise handling.

How to find the right part for the Audi A4 1.9 TDI Quattro

Navigate directly to the appropriate section for your Audi A4 1.9 TDI Quattro:

On a vehicle with several possible drivetrain faults, it is best practice to start directly in the correct category. By comparing the exact sections for the Audi A4 1.9 TDI Quattro, it becomes straightforward to distinguish between faults in a drive shaft, CV joint or propeller shaft, taking you straight to the page that best matches your symptoms and fitment.

The replacement parts market can be complex, and for the Audi A4 1.9 TDI Quattro it is particularly crucial to obtain the exact part due to technical differences between front-wheel-drive and all-wheel-drive models. The best way to navigate correctly is to select your car by its exact make, model and engine variant. This immediately filters the articles verified for your specific car. We also recommend checking our subpages for Audi A4 for an overview, while always confirming fitment against your exact vehicle specification.

Be sure to check specifications such as the number of splines (teeth) on the constant velocity joint and the overall shaft length, as Audi used different equipment manufacturers across production years. Here are the key categories for your vehicle:

  • Drive shafts for Audi A4 1.9 TDI Quattro
  • Outer CV joints for Audi A4 1.9 TDI Quattro
  • Inner CV joints for Audi A4 1.9 TDI Quattro
  • Propeller shafts for Audi A4 1.9 TDI Quattro
  • ABS rings for Audi A4 1.9 TDI Quattro
Our aim is to ensure you select the correct part the first time, avoiding unnecessary downtime in the workshop. With our drivetrain expertise, you can order with complete confidence that your parts will fit properly.

Why shop with CVJoint24

CVJoint24 is the international shop of a Swedish driveline specialist, operating with a sharp focus on drivetrain and power transmission components from our central warehouse in Helsingborg, Sweden. Unlike general automotive retailers selling everything from wiper blades to engine oil, we choose to delve deep into our specialist area. This allows us to provide product knowledge and a dedicated range for the Audi A4 1.9 TDI Quattro that few general suppliers can match. We understand the specific challenges of European roads and how road salt impacts vulnerable parts like ABS reluctor rings and driveshafts.

We provide high-quality spare parts with guaranteed fitment. With prompt dispatches across the EU and customer support that genuinely understands driveline systems, we are your dependable partner. Shopping with a specialist ensures you receive the correct part, sound technical advice and competitive prices every time. We are committed to keeping your Audi running reliably for many thousands of kilometres to come, whether you carry out the work yourself or entrust it to a garage.

Frequently asked questions about the drivetrain for Audi A4 1.9 TDI Quattro

How do I know if my Audi A4 1.9 TDI Quattro needs a new drive shaft?

Common symptoms include clicking noises when turning or vibrations during acceleration. If the CV boot is split and grease has leaked out, there is a substantial risk that the shaft or joint has been damaged.

Do parts from a front-wheel-drive Audi A4 fit my Quattro?

No, usually not. Quattro models feature a unique rear axle setup and frequently different front drive shaft dimensions to accommodate the four-wheel-drive system. Always select your vehicle's make, model and engine to ensure the correct part.

Why does my Audi A4 1.9 TDI Quattro vibrate under acceleration?

Vibrations during acceleration on a Quattro are commonly caused by worn inner CV joints or issues with the propeller shaft centre bearing and universal joints. It is essential to inspect the entire drivetrain.

What is the benefit of buying a complete drive shaft rather than just a CV joint?

Replacing a complete drive shaft saves considerable installation time and ensures both the inner and outer joints are brand new, providing a much more dependable long-term solution than replacing a single component.

How often do ABS rings need replacing on an Audi A4?

ABS rings do not have a fixed replacement interval, but they are constantly exposed to rust and road grime. On the Audi A4, it is common for them to crack over time, which disrupts the ABS sensor signal.

Can I replace the propeller shaft myself on my Audi A4 Quattro?

It is possible for an experienced DIY mechanic, but the job often requires removing sections of the exhaust system and heat shields. Correct tightening torques and accurate alignment are vital for a vibration-free result.