Audi A4 2.0 Tfsi 16V
Car parts and drivetrain components for Audi A4 2.0 Tfsi 16V. Always check the fit before ordering.
Products for Audi A4 2.0 Tfsi 16V
- Position: Front left
- Flange diameter: 123 mm
- Total length: 595 mm
- Splines wheel side: 38
- ABS teeth: 45
- Position: Front right
- Flange diameter: 123 mm
- Total length: 620 mm
- Splines wheel side: 38
- ABS teeth: 45
- Position: Front left, Front right
- Flange diameter: 123 mm
- Joint diameter: 123 mm
- Total length: 544 mm
- ABS teeth: 45
- Position: Front left, Front right
- Flange diameter: 123 mm
- Total length: 521 mm
- Splines wheel side: 38
- ABS teeth: 45
- Position: Outer
- ABS teeth: 45
- Seal diameter: 59 mm
- Inner splines: 27
- Outer splines: 38
- Position: Front
- ABS teeth: 45
- Inner diameter: 77 mm
- Outer diameter: 81 mm
- Width: 11 mm
- Flange diameter: 124 mm
- Total length: 595 mm
- Splines wheel side: 38
- Flange diameter: 124 mm
- Total length: 615 mm
- Splines wheel side: 38
Frequently Asked Questions about Drivetrain Parts for Audi A4 2.0 Tfsi 16V
How do I know whether to replace the entire drive shaft or just the CV joint on my Audi A4 2.0 Tfsi 16V?
If only one joint is damaged and the shaft itself is otherwise intact, replacing just the joint may be sufficient. However, if the shaft is corroded, bent or both joints are worn, replacing the complete drive shaft is often more cost-effective and dependable.
Does the same CV joint fit both the left and right sides?
On the Audi A4 2.0 Tfsi 16V, the outer CV joints are often identical on both sides, but it is essential to check your exact vehicle specifications, as inner joints and complete drive shafts can differ in length and design between the left and right sides.
What are the most common signs of a cracked or damaged ABS ring?
The most common symptoms are the ABS warning light coming on or experiencing vibrations and pulsations in the brake pedal during gentle braking at low speeds. A cracked ring sends distorted signals to the car's control unit.
Can I replace a CV joint on my Audi myself?
Yes, it is possible for a competent DIY mechanic equipped with the right tools, but it demands care and knowledge of how to dismantle parts of the suspension. We always recommend consulting the vehicle's workshop manual.
Why does my Audi A4 2.0 Tfsi 16V vibrate under acceleration?
Vibrations under load, particularly during acceleration, are a classic symptom of a worn inner constant velocity joint. This is typically caused by pitting or wear grooves forming in the joint's bearing tracks.
Are the CV boot and grease included when I buy a CV joint from you?
Yes, when you purchase a CV joint kit from cvjoint24.com, it normally includes everything required for the replacement: the joint itself, a vehicle-specific CV boot, high-grade grease, and all necessary clips and bolts.