Drive shafts for Audi A4 2.0 Tfsi 16V

Are you looking for a replacement drive shaft for your Audi A4 2.0 Tfsi 16V? As a Swedish driveline specialist dispatching across the EU, we supply a carefully chosen range of drive...

Products for Drive shafts for Audi A4 2.0 Tfsi 16V

8 products
1 - 8 of 8
Item no.:1136091
  • Position: Front left
  • Splines wheel side: 38
  • Total length: 595 mm
  • Joint diameter: 98 mm
  • ABS teeth: 45
Item no.:2110653
  • Position: Front right
  • Splines wheel side: 38
  • Total length: 620 mm
  • Joint diameter: 98 mm
  • ABS teeth: 45
Item no.:3118967
  • Position: Front
  • Splines wheel side: 38
  • Total length: 544 mm
  • Joint diameter: 98 mm
  • ABS teeth: 45
Item no.:3154489
  • Position: Front
  • Splines wheel side: 38
  • Total length: 521 mm
  • Joint diameter: 98 mm
  • ABS teeth: 45
Item no.:115381
  • Position: Front left
  • Splines wheel side: 38
  • Total length: 590 mm
  • Joint diameter: 98 mm
  • ABS teeth: 45
Item no.:1163353
  • Position: Front left
  • Splines wheel side: 38
  • Total length: 593 mm
  • Joint diameter: 88 mm
  • ABS teeth: 45
Item no.:1150750
  • Splines wheel side: 38
  • Total length: 595 mm
  • Joint diameter, gearbox side: 123 mm
  • Seal ring diameter: 59,5 mm
  • Thread size: M16x1.5
Item no.:2117857
  • Splines wheel side: 38
  • Total length: 620 mm
  • Joint diameter, gearbox side: 123 mm

Drive shafts for Audi A4 2.0 Tfsi 16V

The Audi A4 2.0 Tfsi 16V is well known for its balance of performance and comfort. Maintaining this balance requires a drivetrain in top condition. The drive shaft is a critical component exposed to significant stress, especially with a turbocharged engine like the 2.0 TFSI where torque is delivered early and forcefully. We stock products tailored precisely to this car model, ensuring you find a replacement that matches the original specifications for your Audi A4 2.0 Tfsi 16V.

Choosing the correct drive shaft is not just about keeping the car moving; it is about ensuring long-term durability and safety. An incorrect or underspecified driveshaft can lead to consequential damage to both the gearbox and wheel bearings. Our car parts are tested to meet the demanding requirements set for Audi models, giving you peace of mind through every corner and acceleration.

What does the drive shaft do on the Audi A4 2.0 Tfsi 16V?

The primary job of the drive shaft on your Audi A4 2.0 Tfsi 16V is to transfer rotational power from the gearbox directly to the driven wheels. It achieves this via a complex assembly that allows the wheels to travel up and down with the suspension and turn during steering, all while maintaining constant power transmission. Without a working drive shaft, engine power never reaches the road, making it one of the most vital mechanical components on the vehicle.

Because the 2.0 TFSI engine features a 16-valve cylinder head and turbocharger, it produces a specific power delivery that the driveshaft must handle without introducing vibration or energy loss. The drive shaft consists of the shaft bar itself along with inner and outer CV joints protected by flexible CV boots. Every link in this chain must function properly for your Audi to perform as the factory intended.

Common signs of wear

There are several clear symptoms indicating it is time to inspect the drive shafts on your Audi A4 2.0 Tfsi 16V. One of the most typical signs is a clicking or knocking noise when making sharp turns at low speed. This usually points to a worn outer constant velocity joint, often caused by a split CV boot that has allowed dirt in and lubricating grease to escape.

Another common symptom is vibration through the steering wheel or the entire car under acceleration. This typically suggests wear in the inner CV joint located closest to the gearbox. If the vibrations increase with vehicle speed or engine load, it strongly indicates that the drive shaft suffers from imbalance or internal damage. Ignoring these signs can eventually lead to complete failure, leaving you stranded.

How to choose the correct drive shaft

When purchasing a replacement drive shaft for your Audi A4 2.0 Tfsi 16V, it is essential to check the specific technical details of your car. Factors such as transmission type (manual or automatic) and whether the car is front-wheel drive or features Quattro all-wheel drive dictate shaft length and spline counts (the teeth at the ends). We therefore advise selecting your exact car by make, model and engine variant to ensure the correct match.

Always verify whether there are differences between the left and right sides, as these often have different lengths on Audi A4 models. By choosing a complete drive shaft from us, you receive a unit with joints and CV boots already assembled and greased, making installation significantly easier and safer than attempting to rebuild individual parts on an old shaft.

Related components to inspect

Feel free to check these related pages for the same vehicle when working on your drive shaft:

When one drivetrain component shows wear, adjacent parts on the same car often require attention too. By comparing these exact pages for the Audi A4 2.0 Tfsi 16V, it is easier to determine whether an issue lies with the drive shaft itself or with a nearby section of the driveline.

This is especially true on models where vibrations, play and unusual noises can transfer symptoms between multiple drivetrain components. A quick look at related categories reduces the risk of replacing one correct part while overlooking an adjacent component that contributes to the same fault.

Replacing worn components at the same time saves both time and labour costs over time, as dismantling the suspension is often the most time-consuming part of the repair.

Why shop with CVJoint24?

CVJoint24 is the international shop of a Swedish driveline specialist, dispatching orders from our warehouse in Helsingborg, Sweden, across the EU. We understand how critical it is to get the correct spare parts straight away, offering high-precision matching when you select your vehicle's make, model and engine. Our focus is on supplying top quality at competitive prices, without ever compromising on safety. With an extensive range dedicated to the Audi A4 2.0 Tfsi 16V, we help you find the precise part you require.

We understand that your car is central to your daily routine, so we dispatch quickly across Europe to keep your downtime to a minimum. When you order from us, you receive dependable spare parts backed by specialist expertise and a secure shopping experience. Select the right replacement straight away and rely on a driveline specialist who knows power transmission inside out.

Frequently Asked Questions about Drive Shafts for Audi A4 2.0 Tfsi 16V

Do all drive shafts fit the Audi A4 2.0 Tfsi 16V?

No, variations exist depending on the gearbox type and whether the car has front-wheel drive or Quattro. Always select your car's exact make, model and engine to find the correct drive shaft.

What are the symptoms of a failing inner CV joint?

Common symptoms include vibrations throughout the car under acceleration, which often disappear when easing off the throttle. This differs from outer CV joints, which typically make clicking noises during cornering.

Are CV boots included when purchasing a complete drive shaft?

Yes, our complete drive shafts are supplied with pre-fitted inner and outer CV joints as well as protective CV boots, ready for direct installation.

How often should a drive shaft be replaced on an Audi A4?

There is no fixed replacement interval, but service life is significantly reduced if a CV boot splits. Regular inspection of the drive shaft boots is the best way to extend the life of the shaft.

Can I replace just the CV joint instead of the entire shaft?

Yes, this is possible if the shaft bar itself remains undamaged. However, in cases of severe wear or corrosion, replacing the entire drive shaft is often safer and more cost-effective.

What does the fitment guarantee at cvjoint24.com mean?

It means we guarantee the part will fit your Audi A4 2.0 Tfsi 16V provided you have selected your exact vehicle details and followed our recommendations.