Audi A4 2.0 Tfsi

Audi A4 2.0 Tfsi drivetrain

The Audi A4 2.0 Tfsi is a car model renowned for its balance of performance and comfort. Its turbocharged engine delivers torque that demands a robust, smoothly operating drivetrain to transfer that power efficiently to the road. The drivetrain in this model is a complex assembly where every component, from the gearbox out to the wheel hubs, must work in perfect harmony. Wear on these parts is natural over time, but with the correct spare parts you can maintain the original driving feel. We specialise specifically in these components to offer you, as an owner, the finest options when it is time for maintenance or repairs.

Our range for the Audi A4 2.0 Tfsi is carefully compiled to cover the most common requirements. We focus on quality and precision, which is essential for a car built with Audi's technical sophistication. By selecting the right car parts, you not only safeguard your vehicle's reliability but also protect its resale value. We help you navigate the technical specifications so you can feel completely confident when ordering spare parts for your car's power transmission.

How the drivetrain is configured on the Audi A4 2.0 Tfsi

The drivetrain layout on an Audi A4 2.0 Tfsi follows Audi's classic engineering principle with a longitudinally mounted engine. This means power is transferred from the engine to the gearbox and then outwards via drive shafts to the front wheels, or in the case of Quattro models, to all four wheels. This configuration places specific demands on the lengths and operating angles of the drive shafts. The drive shafts are equipped with both inner and outer CV joints, allowing the wheels to move up and down with the suspension and steer freely while transferring power smoothly without interruption.

The inner constant velocity joints are mounted to the gearbox and primarily accommodate the axial movement that occurs as the suspension travels. The outer CV joints sit at the wheel hubs and are engineered to cope with the steep angles created at full steering lock. To protect these precision components, durable CV boots filled with specialised grease are fitted. If a CV joint boot splits, dirt ingresses and grease escapes, which rapidly leads to severe joint wear. Understanding this setup is key to diagnosing exactly where a drivetrain issue has developed.

Common faults and symptoms

There are several distinct signs that the drivetrain in your Audi A4 2.0 Tfsi is beginning to wear out. One of the most typical symptoms is a clicking or knocking sound heard when turning sharply at low speeds. This almost always points to a worn outer CV joint. If you instead notice vibrations throughout the car under acceleration, particularly at higher speeds, it often indicates that an inner CV joint or the drive shaft itself has developed play or become unbalanced.

Another common fault involves the ABS system. If the ABS warning light illuminates or the system triggers during normal braking, a cracked or corroded ABS ring is a frequent culprit. On the Audi A4 2.0 Tfsi, these reluctor rings are exposed to the elements, and even a tiny hairline crack is enough to cause false sensor readings. It is also wise to inspect the inside of your alloy wheels and wheel arches for grease splatters, which is a telltale sign of a split CV boot. Addressing these symptoms promptly can save you substantial repair costs down the line.

Common parts to replace on the Audi A4 2.0 Tfsi

When it comes to driveline repairs on this specific model, certain components require replacement more frequently than others. We have structured our catalogue so you can quickly locate the exact category you need. For the Audi A4 2.0 Tfsi, we currently offer the following dedicated components to ensure a flawless fit:

• Drive shaft for Audi A4 2.0 Tfsi (several variants available)
• Outer CV joint for Audi A4 2.0 Tfsi (3 high-quality options)
• Inner CV joint for Audi A4 2.0 Tfsi (3 precision components)
• ABS ring for Audi A4 2.0 Tfsi (1 specific model for an accurate signal)

Replacing a complete drive shaft can often be more cost-effective and time-saving than rebuilding a single joint, especially if multiple sections of the shaft show signs of wear. Our driveshafts arrive complete and ready for installation. If the issue is confined purely to the wheel end, fitting a new CV joint is an economical solution. Whichever part you choose, you can rely on our car parts meeting or exceeding original equipment specifications for your Audi.

How to find the correct part for your Audi A4 2.0 Tfsi

Go directly to the right category for your Audi A4 2.0 Tfsi:

On a vehicle with several potential drivetrain issues, it pays to start in the correct section straight away. By comparing the dedicated subcategories for the Audi A4 2.0 Tfsi, it becomes much easier to distinguish between faults in a drive shaft, CV joint or propeller shaft, directing you to the page that matches your symptoms and fitment.

• Drive shafts for Audi A4 2.0 Tfsi
• Outer CV joints for Audi A4 2.0 Tfsi
• Inner CV joints for Audi A4 2.0 Tfsi
• ABS rings for Audi A4 2.0 Tfsi

Identifying the exact replacement part for an Audi A4 2.0 Tfsi can occasionally be tricky, as components vary depending on the gearbox type (manual, Tiptronic or Multitronic) and whether the car is front-wheel drive or equipped with Quattro all-wheel drive. The most reliable method is to select your vehicle's make, model and engine variant in our store selector. This filters our catalogue down to the items verified specifically for your car.

In addition to checking your vehicle's specification, it can be helpful to verify the chassis number (VIN) or the original equipment (OEM) part number stamped on the installed component. This is particularly relevant around mid-year production changes, where Audi may have updated a component supplier or design. If you need any guidance, our customer support team is always on hand. We possess in-depth technical knowledge of Audi drivetrains and can help you select the correct part, preventing unnecessary returns and getting your car back on the road without delay.

Why buy from CVJoint24?

CVJoint24 is not just another general car parts website; we are the international store of a Swedish specialist dedicated entirely to drivetrains and power transmission. Our ethos is built on providing deep expertise and a comprehensive inventory that broader motor factors simply cannot match. When you order from us, you receive parts selected specifically for their durability and precise fitment. We understand how important it is that every repair is done right first time, which is why we offer a dependable fitment guarantee across our entire range.

We also recognise that time is of the essence, whether your car is booked into a garage workshop or up on axle stands at home. Operating from our central Swedish warehouse in Helsingborg, we dispatch orders swiftly across the EU. With our focus on accurate picking and supplying the correct part first time, we strive to be the premier supplier for every Audi A4 2.0 Tfsi owner. Combining technical advice with an effortless online shopping experience, we make maintaining your car's drivetrain simple, reliable and built to last for many kilometres to come.