Audi A4 2.6 Quattro

Quality spare parts and drivetrain components for the Audi A4 2.6 Quattro. Check your make, model and engine to ensure an accurate fit before ordering.

Products for Audi A4 2.6 Quattro

27 products
1 - 24 of 27
Item no.:1179920
  • Position: Front left
  • Flange diameter: 108 mm
  • Total length: 616 mm
  • Splines wheel side: 38
  • ABS teeth: 45
Item no.:2176035
  • Position: Front right
  • Flange diameter: 100 mm
  • Total length: 640 mm
  • Splines wheel side: 38
  • ABS teeth: 45
Item no.:0483449
  • Position: Inner
  • Seal diameter: 100 mm
  • Inner splines: 33
  • Joint diameter: 100 mm
Item no.:0557265
  • Position: Outer
  • ABS teeth: 45
  • Seal diameter: 53 mm
  • Inner splines: 30
  • Outer splines: 33
Item no.:0587045
  • Position: Outer
  • ABS teeth: 45
  • Seal diameter: 60 mm
  • Inner splines: 30
  • Outer splines: 38
Item no.:1117373
  • Position: Front left
  • Flange diameter: 130 mm
  • Total length: 602 mm
  • Splines wheel side: 38
  • ABS teeth: 45
Item no.:0340008
  • ABS teeth: 45
  • Inner diameter: 64 mm
  • Outer diameter: 74 mm
  • Width: 8,1 mm
Item no.:0307931
  • ABS teeth: 45
  • Inner diameter: 77 mm
  • Outer diameter: 81 mm
  • Width: 11 mm
Item no.:0261331
  • Position: Inner
  • Inner splines: 25
  • Joint diameter: 100 mm
Item no.:332789
  • Position: Front
  • ABS teeth: 45
  • Inner diameter: 77 mm
  • Outer diameter: 81 mm
  • Width: 11 mm
Item no.:339927
  • Position: Front
  • ABS teeth: 45
  • Inner diameter: 64 mm
  • Outer diameter: 74 mm
  • Width: 8,1 mm
Item no.:0674976
  • Inner diameter: 22 mm
  • Total length: 111 mm
Item no.:0657342
  • Position: Front
  • Diameter: 84 mm
  • Outer diameter: 23 mm
Item no.:0659190
  • Position: Front
  • Inner diameter: 22 mm
  • Total length: 84 mm
Item no.:0645349
  • Position: Front
  • Diameter: 91 mm
  • Outer diameter: 24 mm
Item no.:0852501
  • Inner diameter: 30 mm
Item no.:314661
  • Outer diameter: 100 mm
Item no.:627356
  • Position: Rear
  • Total length: 1,149 mm
Item no.:119652
  • Position: Front left
  • Flange diameter: 130 mm
  • Total length: 601 mm
  • Splines wheel side: 38
  • ABS teeth: 45
Item no.:110856
  • Total length: 600 mm
  • Splines wheel side: 38
Item no.:118385
  • Total length: 614 mm
  • Splines wheel side: 38
  • ABS teeth: 45
Item no.:612972
  • Total length: 593 mm
  • Splines wheel side: 33
  • ABS teeth: 45
Item no.:313743
  • Total length: 625 mm
  • Splines wheel side: 38
Item no.:0441827
  • Position: Inner
  • Seal diameter: 94 mm
  • Inner splines: 33
  • Number of joints: 3
  • ABS teeth: 0
Showing 1–24 of 27 products

Audi A4 2.6 Quattro drivetrain components

The Audi A4 2.6 Quattro combines Audi's classic 2.6-litre V6 engine with the renowned Quattro permanent four-wheel drive system. To keep this advanced power transfer operating at its best, you need components capable of handling the forces generated when torque is distributed across all four wheels. At CVJoint24, you will find a dedicated range of parts engineered specifically for this engine and drivetrain setup. We appreciate the importance of precision engineering in every component, from the splines on a drive shaft to the fine tolerances within a CV joint. Selecting the correct spare parts ensures your car retains its performance and safety, while significantly reducing the risk of costly driveline breakdowns down the road. Our catalogue is carefully curated to satisfy demanding enthusiasts and daily motorists alike who demand the highest quality.

How the drivetrain works on the Audi A4 2.6 Quattro

The drivetrain on an Audi A4 2.6 Quattro is an intricate arrangement featuring a longitudinally mounted engine paired with a gearbox housing a central Torsen differential. This differential forms the core of the Quattro system, distributing torque mechanically between the front and rear axles. Drive is channelled forwards to the front wheels via front driveshafts and backwards via a robust propeller shaft to the rear differential. Each wheel is fitted with both inner and outer constant velocity joints that accommodate suspension articulation and, at the front, steering angles. Furthermore, the system integrates with vehicle safety electronics through ABS rings mounted at every wheel hub. Because of this complex layout, every individual part must remain in peak condition to prevent vibrations or loss of power. An unbalanced prop shaft or excess play in a constant velocity joint can quickly transfer through the chassis and impair the overall driving experience.

Common faults and symptoms

Several unmistakable warning signs point to worn drivetrain components on your Audi A4 2.6 Quattro. One of the most typical symptoms is a sharp clicking or knocking noise from the front axle on full lock, which almost always stems from a worn outer CV joint. If you notice shuddering or vibrations through the car during acceleration, the issue is frequently attributable to worn inner CV joints or an unbalanced propeller shaft. For Quattro drivers, it is equally important to listen out for whining or droning sounds coming from beneath the floorpan, which typically suggests that the prop shaft centre bearing or universal joints have reached the end of their service life. Another frequent fault involves erratic ABS intervention or dashboard warning lights, usually caused by a cracked or heavily corroded ABS ring. Overlooking these symptoms can cause severe knock-on damage to differentials or the gearbox, making prompt diagnosis and repair vital.

Common replacement parts for the Audi A4 2.6 Quattro

To assist with your maintenance schedule, we have organised the key drivetrain components for your Audi A4 2.6 Quattro into dedicated sections. Our inventory currently includes 10 specific parts for this model variant. Explore our most popular categories below:

  • Drive shaft for Audi A4 2.6 Quattro (3 available) – Complete shafts for both front and rear axles.
  • Outer CV joint for Audi A4 2.6 Quattro (2 available) – For installation at the front wheel hubs.
  • Inner CV joint for Audi A4 2.6 Quattro (2 available) – Connects directly to the gearbox or rear final drive.
  • Propeller shaft for Audi A4 2.6 Quattro (1 available) – The centre shaft delivering power to the rear axle.
  • ABS ring for Audi A4 2.6 Quattro (3 available) – Crucial for the reliable operation of your braking system.

Each of these parts is selected for exceptional fitment and longevity, which is especially critical on an all-wheel-drive platform where all driving components endure a steady, demanding workload.

How to find the correct part for your Audi A4 2.6 Quattro

Navigate to the specific component category for your Audi A4 2.6 Quattro:

When addressing potential driveline issues, starting in the precise subcategory saves valuable time. By comparing the exact component sections for the Audi A4 2.6 Quattro, you can easily distinguish between drive shaft, CV joint or propeller shaft problems and head straight to the page that matches your car's symptoms and specifications.

Sourcing the right replacement part for an Audi A4 2.6 Quattro demands care, as factory specifications can vary according to chassis number and build date. The most reliable method to ensure a precise match is to select your vehicle by make, model and engine variant in our store selector. This automatically narrows down the catalogue to parts verified for your car. If you remain unsure whether a specific drive shaft or ABS ring matches your vehicle, we advise checking the spline count on your original part and comparing it with our product dimensions. At CVJoint24, we provide a guaranteed fitment pledge when you select your vehicle through our catalogue search, helping you choose the right part the first time and preventing unnecessary workshop delays.

Why shop with CVJoint24

CVJoint24 is the international shop of a Swedish driveline specialist shipping across the EU from our warehouse in Helsingborg, Sweden. We offer technical expertise and a product depth far exceeding that of general motor factors. When you purchase a propeller shaft, an outer CV joint or an inner CV joint for your Audi A4 2.6 Quattro from us, you can count on a product engineered to match or exceed original specifications. We provide prompt delivery across Europe, backed by a knowledgeable customer support team ready to assist with technical driveline questions. We are dedicated to helping motorists maintain their vehicles in peak mechanical health with premium components at fair prices. With our deep technical focus, dependable inventory and comprehensive guarantees, CVJoint24 is the trusted supplier for Audi drivers who refuse to compromise on drivetrain reliability.

Frequently Asked Questions about Drivetrain Parts for Audi A4 2.6 Quattro

How do I know if a CV joint has failed on my Audi A4 2.6 Quattro?

The most common sign is a clicking noise when turning on full lock while driving. Vibrations during acceleration can also indicate worn inner constant velocity joints.

Does the same front drive shaft fit both the left and right side?

This varies depending on the gearbox type and model year. Always select your car's make, model and engine to find the exact parts for your vehicle.

Why has the ABS warning light come on in my Audi A4?

On the Audi A4 2.6 Quattro, a cracked or corroded ABS ring is a very common cause. The reluctor ring sits on the CV joint and sends signals to the ABS sensor.

Is the propeller shaft on the Quattro model maintenance-free?

In theory yes, but in practice the centre bearing and universal joints wear out over time. Vibrations coming from underneath the centre of the car indicate that the prop shaft needs inspection.

What is included when I buy a CV joint kit from you?

Our kits normally include the CV joint, CV boot, grease, clamps, and a fitting bolt or nut to ensure a complete and reliable replacement.

How quickly can my spare parts be delivered?

We aim to dispatch all in-stock parts the very same day, ensuring prompt and dependable delivery across the EU directly from our Swedish warehouse.