Audi A5 Sportback 2.0 TDI Quattro

Quality spare parts and drivetrain components for Audi A5 Sportback 2.0 TDI Quattro. Select your make, model and engine to verify fitment.

Products for Audi A5 Sportback 2.0 TDI Quattro

37 products
1 - 24 of 37
Item no.:0437432
  • Position: Inner
  • Inner splines: 24
Item no.:353127
  • Position: Front, Outer
  • Inner splines: 28
  • Outer diameter: 94 mm
  • Splines wheel side: 42
Item no.:3118937
  • Position: Front left, Front right
  • Flange diameter: 123 mm
  • Total length: 469 mm
  • Splines wheel side: 42
Item no.:6205963
  • Position: Rear
  • Number of centre bearings: 1
  • Number of joints: 2
  • Total length: 1,630 mm
Item no.:0528313
  • Position: Outer
  • Seal diameter: 76,5 mm
  • Inner splines: 25
  • Outer splines: 42
Item no.:6185457
  • Position: Rear left, Rear right
  • Flange diameter: 100 mm
  • Total length: 626 mm
  • Splines wheel side: 42
Item no.:0543104
  • Position: Outer
  • Seal diameter: 76,5 mm
  • Inner splines: 29
  • Outer splines: 42
Item no.:0597672
  • Position: Outer
  • Seal diameter: 76 mm
  • Inner splines: 27
  • Outer splines: 42
  • Joint diameter: 100 mm
Item no.:0656882
  • Position: Front
  • Diameter: 76 mm
  • Height: 120 mm
  • Outer diameter: 22 mm
Item no.:4177315
  • Position: Rear left
  • Total length: 587 mm
  • Splines wheel side: 42
Item no.:5137319
  • Position: Rear right
  • Total length: 545 mm
  • Splines wheel side: 42
Item no.:0239955
  • Number of centre bearings: 1
  • Number of joints: 2
  • Total length: 1,529 mm
Item no.:0257323
  • Diameter: 30 mm
  • Hole spacing c/c: 228 mm
Item no.:6142634
  • Position: Rear left, Rear right
  • Flange diameter: 100 mm
  • Total length: 630 mm
  • Splines wheel side: 42
Item no.:0529495
  • Position: Outer
  • Seal diameter: 76,5 mm
  • Inner splines: 33
  • Outer splines: 42
  • Joint diameter: 88 mm
Item no.:6254506
  • Position: Rear
  • Number of centre bearings: 1
  • Number of joints: 3
  • Total length: 1,640 mm
Item no.:0693774
  • Height: 85 mm
  • Inner diameter: 22 mm
  • Outer diameter: 80 mm
Item no.:0823070
  • Diameter: 30 mm
  • Height: 102 mm
  • Hole spacing c/c: 228 mm
  • Inner diameter: 30 mm
  • Bearing thickness: 15 mm
Item no.:643899
  • Position: Inner
  • Total length: 28 mm
Item no.:647582
  • Position: Inner
  • Seal diameter: 76,5 mm
  • Total length: 87 mm
  • Splines gearbox side: 42
Item no.:647399
  • Position: Inner
  • Seal diameter: 76,5 mm
  • Total length: 76 mm
  • Splines gearbox side: 42
Item no.:628597
  • Position: Rear
  • Total length: 1,675 mm
Showing 1–24 of 37 products

Drivetrain for Audi A5 Sportback 2.0 TDI Quattro

The Audi A5 Sportback 2.0 TDI Quattro combines sleek styling with sophisticated all-wheel-drive technology. Maintaining the sharp dynamics and reassurance that the Quattro system delivers requires every drivetrain component to be in peak condition. The driveline on this model faces substantial demands, particularly with the healthy torque of the 2.0 TDI engine being distributed across all four wheels. We supply a carefully chosen range of car parts engineered specifically for this drivetrain. We understand the vital role precision plays in power transmission, which is why we only stock parts that meet the rigorous standards expected of a modern Audi. Fitting the correct components prolongs your car's lifespan and ensures engine power reaches the road without losses or unwanted noises.

How the drivetrain is engineered on the Audi A5 Sportback 2.0 TDI Quattro

The drivetrain on an Audi A5 Sportback 2.0 TDI Quattro is an intricate mechanical setup working in harmony to deliver maximum grip. Power flows from the engine through the gearbox into a centre differential, which splits torque between the front and rear axles. A central propeller shaft for Audi A5 Sportback 2.0 TDI Quattro routes torque rearwards to the rear axle, whilst front drive shafts deliver drive to the front wheels. The system is designed for responsiveness and efficiency, but this also means numerous moving parts rely on adequate lubrication and protection. Each drive shaft uses CV joints that permit the suspension to travel and the front wheels to steer while transferring continuous power. On Quattro models, precise prop shaft balancing and healthy constant velocity joints are vital to prevent chassis vibrations.

Common faults and symptoms

Several distinct symptoms indicate that a drivetrain component is beginning to fail. One of the most frequent signs is a metallic clicking or knocking noise on full steering lock, which typically points to a worn outer CV joint on your Audi A5 Sportback 2.0 TDI Quattro. If you instead feel vibrations through the vehicle cabin under brisk acceleration, an inner CV joint or the propeller shaft centre bearing may be worn. Quattro owners should also watch for harmonic vibrations appearing at specific road speeds, as these are often caused by prop shaft imbalance. Overlooking these warning signs can result in secondary damage to the gearbox or differentials, which proves far more costly than renewing an individual worn joint or driveshaft in good time.

Common parts to replace on the Audi A5 Sportback 2.0 TDI Quattro

Across our range for the Audi A5 Sportback 2.0 TDI Quattro, we have identified the crucial driveline items that commonly require replacement over high mileages. We currently offer 9 different drive shaft options for the Audi A5 Sportback 2.0 TDI Quattro, covering front and rear axle applications. Alongside complete driveshafts, outer CV joints represent a standard wear item, particularly if a split CV boot has allowed road dirt to contaminate the grease. We also stock dedicated solutions for the propeller shaft, with 3 variants available to cater for differences across the model series. Replacing tired components with correctly specified parts restores your Audi's original driving refinement and safeguards against unexpected breakdowns. We always recommend inspecting boot condition during routine servicing to stop premature joint failure before it starts.

Finding the right part for your Audi A5 Sportback 2.0 TDI Quattro

Navigate directly to the relevant subcategory for your Audi A5 Sportback 2.0 TDI Quattro:

When diagnosing drivetrain problems, starting in the right section saves valuable time. By comparing the specific product categories for the Audi A5 Sportback 2.0 TDI Quattro, you can isolate whether an issue lies with a drive shaft, CV joint or propeller shaft, taking you straight to the exact fitment for your symptoms.

We always suggest cross-referencing product details with your vehicle's existing parts if variants exist, but our fitment guarantee ensures you can purchase with complete confidence.

Why buy from CVJoint24?

CVJoint24 is the international shop of a Swedish driveline specialist shipping across the EU from our central warehouse in Helsingborg, Sweden. We offer specialised technical expertise and product depth that few suppliers can match, particularly on complex platforms like the Audi A5 Sportback 2.0 TDI Quattro. Our focus is ensuring you receive the correct part first time, backed by our comprehensive vehicle database and fitment guarantee. Ordering from us gives you access to premium spare parts with swift order processing and dependable international delivery. We appreciate how essential your car is, aiming to minimise off-road time with exact-fit components delivered promptly. Choose an expert that understands your drivetrain inside out – order with confidence from cvjoint24.com.

Frequently Asked Questions about Drivetrain for Audi A5 Sportback 2.0 TDI Quattro

How do I know if my Audi A5 Sportback 2.0 TDI Quattro needs a new drive shaft?

The most common signs are vibrations under acceleration or unusual noises from the wheel arches. If vibrations are felt throughout the entire car, it often indicates a worn inner joint or propeller shaft, whereas a clicking noise when turning typically points to the outer CV joint.

Do all CV joints fit the Quattro model?

No, Quattro models often feature specific dimensions and spline counts compared to front-wheel-drive variants. Always select your car's exact make, model and engine on cvjoint24.com to ensure you receive parts tailored to your four-wheel-drive system.

What is the difference between an inner and an outer CV joint?

The outer CV joint is located closest to the wheel and accommodates steering angles, whereas the inner joint sits closest to the gearbox or differential and primarily handles suspension movement. Wear symptoms differ between the two.

How many propeller shafts are available for my Audi A5 Sportback?

We offer 3 different propeller shafts in our range for this model. The differences usually depend on the gearbox type and year of manufacture, so selecting your precise vehicle details is essential to find the correct match.

Are the CV boot and grease included when I buy a CV joint kit?

Yes, our CV joint kits come complete with the CV joint, CV boot, grease, clamps and mounting hardware so that you can carry out a proper replacement straight away.

Can I replace only the boot if the joint is still undamaged?

Absolutely. If you spot a split CV boot early before dirt and moisture have damaged the joint, you can save money by simply replacing the boot and repacking it with fresh grease.