Audi A5 Sportback 40 TDI Quattro

Welcome to your specialist for Audi A5 Sportback 40 TDI Quattro driveline components. We supply a carefully chosen range of high-quality parts designed to keep your car's power delivery...

Products for Audi A5 Sportback 40 TDI Quattro

3 products
1 - 3 of 3
Item no.:316533
  • Position: Front left, Front right
  • Flange diameter: 123 mm
  • Joint diameter: 83,6 mm
  • Total length: 466 mm
  • ABS teeth: 0
Item no.:140850
  • Position: Front, Inner
  • Total length: 88 mm
  • Splines gearbox side: 34
  • ABS teeth: 34
Item no.:356165
  • Position: Front, Outer
  • Inner splines: 28
  • Outer diameter: 94 mm
  • Splines wheel side: 42

Audi A5 Sportback 40 TDI Quattro Drivetrain

The Audi A5 Sportback 40 TDI Quattro represents a sophisticated balance between sporty performance and everyday efficiency. Maintaining its unique driving experience and precise handling requires a drivetrain in top condition. The power transmission on this model is specifically engineered to cope with the torque delivered by the 40 TDI engine, whilst the Quattro system distributes power between the front and rear axles for optimal traction. Here at CVJoint24 you will find the specific components required to maintain this advanced setup on your Audi A5 Sportback. We understand that every part, from the smallest circlip to the complete axle, plays a vital role in your car's overall safety and performance. By choosing the right spare parts, you extend the lifespan of your vehicle and ensure it continues to deliver the premium feel Audi is renowned for.

How the Audi A5 Sportback 40 TDI Quattro drivetrain is designed

The drivetrain layout of the Audi A5 Sportback 40 TDI Quattro centres around the permanent all-wheel-drive system synonymous with the marque. The engine is longitudinally mounted, sending power through the gearbox to a centre differential and onwards to both the front and rear axles. Each wheel connects via a drive shaft that must accommodate substantial suspension travel and, at the front axle, sharp steering angles. This complexity places exceptionally high demands on every outer CV joint on the Audi A5 Sportback 40 TDI Quattro to operate without friction or play. While engineered to be robust and responsive, active driving or rough road surfaces inevitably accelerate wear on joints and driveshafts. Understanding how these parts interact is key to spotting when maintenance is due before a minor issue develops into an expensive failure.

Common faults and symptoms

Several clear signs indicate that drivetrain components on your Audi are wearing out and need attention. One of the most typical symptoms is a rhythmic clicking or knocking noise on full steering lock under acceleration, which almost always points to a worn outer CV joint. If you experience vibrations through the vehicle body during acceleration instead, particularly at higher speeds, the issue is often caused by an inner CV joint on the Audi A5 Sportback 40 TDI Quattro or an unbalanced drive shaft. Inspecting the boots regularly is equally vital. A split CV boot quickly allows lubricating grease to escape whilst letting in dirt and water. This forms an abrasive paste that ruins the hardened bearing surfaces inside the constant velocity joint in no time. Acting promptly when these symptoms appear saves both time and money.

Common parts to replace on the Audi A5 Sportback 40 TDI Quattro

For this specific model, three main component categories are most frequently needed during drivetrain repairs or routine servicing. We stock complete drive shafts delivered ready for direct installation, which is often the most cost-effective and straightforward solution for significant wear. If the problem is confined to a specific end of the axle, replacing just the outer or inner joint using our comprehensive repair kits is an ideal option. Choosing parts with the correct specifications ensures your Audi retains its Quattro capability and dependable road manners. Here are the key categories for your vehicle:

  • Drive shafts for Audi A5 Sportback 40 TDI Quattro
  • Outer CV joints for Audi A5 Sportback 40 TDI Quattro
  • Inner CV joints for Audi A5 Sportback 40 TDI Quattro

Every item in our range is carefully selected to satisfy the rigorous material standards and tight tolerances demanded by modern Audi vehicles.

Find the right part for your Audi A5 Sportback 40 TDI Quattro

Browse directly to the relevant section for the Audi A5 Sportback 40 TDI Quattro:

When diagnosing multiple potential drivetrain issues, starting in the right subcategory saves valuable time. By comparing the exact component sections for the Audi A5 Sportback 40 TDI Quattro, it is straightforward to differentiate between drive shaft, CV joint or propeller shaft issues and navigate to the page matching your symptoms and fitment needs.

Identifying the precise replacement part for a modern Audi can be tricky, as technical dimensions, lengths and spline counts may vary depending on the production month and chassis number. The most reliable way to find the right part is to select your vehicle by make, model and engine variant in our catalogue. Filtering our extensive range ensures you are shown only the parts guaranteed to fit your specific Audi A5 Sportback 40 TDI Quattro. This removes the guesswork and avoids incorrect orders. Should you need any assistance, our technical experts are on hand to guide you through the specifications so that your new part fits perfectly first time.

Why shop at CVJoint24?

CVJoint24 is your dedicated driveline specialist for Audi, operating from our central warehouse in Helsingborg, Sweden, and delivering across the EU. We combine in-depth technical knowledge with extensive stock to provide dependable, high-grade solutions. With our accurate fitment and an uncompromising approach to quality, you can rely on our car parts to perform to original standards. We know how crucial it is to get your vehicle back on the road without delay, which is why we dispatch orders promptly. When you buy from us, you gain the confidence of dealing with an experienced specialist who truly understands complex automotive drivetrains.

Frequently Asked Questions about Drivetrain for Audi A5 Sportback 40 TDI Quattro

How do I know if the drive shaft on my Audi A5 Sportback 40 TDI Quattro needs replacing?

The most common signs are vibrations under acceleration or unusual noises while driving. If the vibrations are felt throughout the entire vehicle, it is often the inner joint or the shaft itself that is unbalanced or worn.

What causes a clicking noise when turning in my Audi?

A clicking sound during sharp turns is almost always caused by a worn outer CV joint. This is typically the result of a split CV boot that has allowed grease to leak out and dirt to enter the joint.

Do all drive shafts from the A5 range fit my 40 TDI Quattro?

No, drive shafts vary depending on the engine option, gearbox and whether the car is Quattro or front-wheel drive. Always select your exact make, model and engine to ensure the correct fitment for your specific vehicle.

Are the CV boot and grease included when I buy a CV joint from you?

Yes, our CV joint kits are supplied complete with the joint, model-specific CV boot, high-grade grease, clamps and any necessary fitting accessories such as bolts or circlips.

Can I replace just the inner CV joint on my Audi A5?

Yes, if the shaft itself is undamaged, you can replace just the inner joint. We offer dedicated inner CV joint kits for the Audi A5 Sportback 40 TDI Quattro to ensure a cost-effective repair.

How quickly can my spare parts be delivered?

We dispatch promptly across the EU from our central warehouse so you can get your Audi A5 Sportback 40 TDI Quattro back on the road as quickly as possible.