Audi A6 Avant 4.2 Quattro

Spare parts and drivetrain components for the Audi A6 Avant 4.2 Quattro. Confirm fitment using your make, model and engine before ordering.

Products for Audi A6 Avant 4.2 Quattro

39 products
1 - 24 of 39
Item no.:7311819
  • Position: Inner
  • Inner splines: 34
  • Seal diameter: 123 mm
  • Total length: 84 mm
  • Joint diameter: 104 mm
Item no.:3108183
  • Position: Front
  • Splines wheel side: 38
  • Total length: 544 mm
  • Joint diameter: 98 mm
  • ABS teeth: 45
Item no.:0253437
  • Diameter: 30 mm
  • Bearing thickness: 15 mm
  • Hole spacing c/c: 241 mm
  • Height: 105 mm
Item no.:0231130
  • Diameter: 30 mm
  • Bearing thickness: 13 mm
  • Hole spacing c/c: 241 mm
  • Height: 82 mm
Item no.:0510415
  • Position: Outer
  • Inner splines: 27
  • Seal diameter: 59 mm
  • Outer splines: 38
  • ABS teeth: 45
Item no.:6235733
  • Position: Rear
  • Total length: 1,755 mm
  • Number of joints: 3
  • Number of centre bearings: 1
Item no.:0380387
  • Position: Front
  • ABS teeth: 45
  • Inner diameter: 77 mm
  • Outer diameter: 81 mm
  • Width: 11 mm
Item no.:0295360
  • Position: Inner
  • Inner splines: 25
  • Joint diameter: 100 mm
Item no.:0605823
  • Total length: 92 mm
Item no.:416673
  • Position: Rear
  • Splines wheel side: 38
  • Total length: 655 mm
  • Joint diameter: 88 mm
  • ABS teeth: 45
Item no.:1171415
  • Position: Front left
  • Splines wheel side: 38
  • Total length: 605 mm
  • Joint diameter: 100 mm
  • Joint diameter, gearbox side: 123 mm
Item no.:2183136
  • Position: Front right
  • Splines wheel side: 38
  • Total length: 525 mm
  • Joint diameter: 100 mm
  • Joint diameter, gearbox side: 123 mm
Item no.:6167629
  • Position: Rear
  • Splines wheel side: 38
  • Total length: 650 mm
  • Joint diameter: 88 mm
  • Flange diameter: 108 mm
Item no.:0573114
  • Position: Outer
  • Inner splines: 27
  • Seal diameter: 59 mm
  • Outer splines: 38
  • Thread size: M16 x 1,5
Item no.:0215284
  • Total length: 1,763 mm
  • Number of joints: 3
  • Outer diameter 1: 99,7 mm
  • Bolt circle diameter 1: 86 mm
  • Outer diameter 2: 99,7 mm
Item no.:0523553
  • Position: Rear, Outer
  • Inner splines: 33
  • Seal diameter: 59,5 mm
  • Outer splines: 38
  • Thread size: M16X1,5
Item no.:341215
  • Position: Front, Inner
  • Inner splines: 34
  • Seal diameter: 100 mm
  • Joint diameter: 85 mm
Item no.:0418060
  • Position: Inner
  • Inner splines: 28
  • Seal diameter: 108 mm
  • Total length: 32 mm
  • Joint diameter: 108 mm
Item no.:345445
  • Position: Inner
  • Inner splines: 34
  • Seal diameter: 130 mm
  • Total length: 59,5 mm
  • Joint diameter: 90 mm
Item no.:349790
  • Position: Front right, Inner
  • Inner splines: 28
  • Seal diameter: 50 mm
  • Total length: 300 mm
  • Joint diameter: 102 mm
Item no.:346201
  • Position: Inner
  • Inner splines: 22
  • Seal diameter: 31 mm
  • Total length: 157 mm
  • Joint diameter: 75 mm
Item no.:350168
  • Position: Outer
  • Inner splines: 30
  • Seal diameter: 59 mm
  • Outer splines: 38
  • ABS teeth: 45
Showing 1–24 of 39 products

Drivetrain for Audi A6 Avant 4.2 Quattro

The Audi A6 Avant 4.2 Quattro is a vehicle that blends luxury with raw power from its iconic V8 engine. For this power to reach the road efficiently, a drivetrain in peak condition is vital. The Quattro system is the very heart of the car's performance, and every component from the gearbox to the wheel hubs must work in perfect unison to handle the high torque. As driveline specialists, we understand the unique demands that a 4.2-litre engine places on drive shafts and joints. We provide a carefully selected range dimensioned to handle the mechanical loads and heat generated during spirited driving. By maintaining your drivetrain with the correct parts, you secure not only the car's acceleration, but also its long-term safety and durability on the road.

How the drivetrain is engineered on the Audi A6 Avant 4.2 Quattro

The layout of the drivetrain on an Audi A6 Avant 4.2 Quattro is technically sophisticated and optimised for permanent all-wheel drive. The engine is mounted longitudinally, meaning power is sent via a central gearbox to a Torsen differential. From there, power is distributed forwards to the front axle and rearwards via a propeller shaft Audi A6 Avant 4.2 Quattro to the rear axle. At the front, drive shafts with both inner and outer CV joints accommodate both suspension travel and steering angles under heavy load. At the rear, similar shafts manage the power transfer to the rear wheels. This complex configuration requires all components, including the centre bearing on the propeller shaft and the individual CV joints, to remain in sound condition to avoid drivetrain losses and mechanical wear within the sophisticated Quattro system. Every link in the chain is essential for the car's signature roadholding.

Common faults and symptoms

There are several distinct signs that drivetrain components are starting to fail on your Audi A6 Avant 4.2 Quattro. One of the most typical symptoms is a clicking or knocking sound on full steering lock, which usually indicates that an outer CV joint Audi A6 Avant 4.2 Quattro is worn or has a split boot that has let in road dirt. If you instead experience vibrations throughout the car during acceleration, this can point to a failing inner CV joint Audi A6 Avant 4.2 Quattro. For Quattro models, vibrations at specific speeds are frequently linked to an imbalanced prop shaft or a worn centre bearing. Furthermore, a cracked ABS ring Audi A6 Avant 4.2 Quattro can send incorrect signals to the braking system, triggering warning lights on the dash and compromising safety functions, particularly in winter driving conditions.

Common parts to replace on the Audi A6 Avant 4.2 Quattro

Based on our statistics and technical expertise, certain components need replacing more frequently on this specific model owing to its high power output. We currently stock a comprehensive range for the Audi A6 Avant 4.2 Quattro, organised to cover the complete power transmission. Our selection includes:

  • Drive shafts: We supply several variants of drive shaft Audi A6 Avant 4.2 Quattro to meet the needs of both the front and rear axles.
  • Outer CV joints: Multiple options are available to rectify noises and play at the wheel hubs.
  • Inner CV joints: 2 high-quality options to eliminate vibrations under hard acceleration.
  • Propeller shafts: 2 dedicated solutions for central power transmission between the front and rear axles.
  • ABS rings: 1 precision part to restore critical ABS functionality.

These components are vital for maintaining the balance and driving dynamics characteristic of a V8-powered Quattro Audi, and we always advise checking the condition of the CV boots at every service.

How to find the right part for the Audi A6 Avant 4.2 Quattro

Navigate directly to the appropriate section for the Audi A6 Avant 4.2 Quattro:

On a vehicle with several potential drivetrain issues, it pays to start in the correct category straight away. By comparing the exact part sections for the Audi A6 Avant 4.2 Quattro, it becomes much easier to distinguish between faults in a drive shaft, CV joint or propeller shaft and to proceed to the page that best matches your symptoms and fitment.

Finding the correct replacement part for an Audi A6 Avant 4.2 Quattro can be challenging due to technical variations across the model range and differences between production years. The safest way to guarantee fitment is to select your car's exact make, model and engine variant in our catalogue. This filters out everything except the parts fully compatible with your vehicle's chassis and drivetrain setup. As you browse our site, you can easily click through to specific categories to view our complete range. Filtering by your precise vehicle details ensures you receive the correct part delivered to your door without unnecessary returns or garage delays. We have made navigating between driveshafts, constant velocity joints and prop shafts straightforward, letting you focus on getting your Audi back to peak performance. Our database is updated continuously to reflect the latest specifications for your model.

Why shop at CVJoint24

CVJoint24 is the international shop of a Swedish driveline and power transmission specialist, shipping across the EU from our warehouse in Helsingborg, Sweden. We focus exclusively on components such as drive shafts, CV joints and propeller shafts, giving us specialised expertise and inventory depth that general car parts stores rarely match. When you order from us, you get the right part every time thanks to precise technical matching and our comprehensive fitment guarantee. We understand that your Audi A6 Avant 4.2 Quattro demands parts engineered for both immense power and fine precision, which is why we only partner with proven manufacturers. We help you minimise garage downtime so you can get back on the road promptly and enjoy the true Quattro driving experience. Our commitment is to deliver a smooth, dependable shopping experience for anyone who expects technical excellence from their vehicle's drivetrain.

Frequently asked questions about drivetrain parts for Audi A6 Avant 4.2 Quattro

How do I know if my Audi A6 Avant 4.2 Quattro needs a new drive shaft?

The most common signs are vibrations under acceleration or unusual noises while driving. If you notice the car shaking under load, it is often the inner joint on the drive shaft that is worn.

Why is there a clicking noise when I turn in my Audi A6 Avant 4.2 Quattro?

A clicking sound when turning is almost always caused by a worn outer CV joint. This often happens because a CV boot has split, allowing grease to escape and dirt to penetrate into the joint.

Do all propeller shafts fit the Audi A6 Quattro?

No, the propeller shaft is specific to the engine variant and gearbox type. For the 4.2 Quattro model, a prop shaft dimensioned to handle the torque of the V8 engine is required. Always select your exact make, model and engine to find the right part.

What should I do if the ABS warning light comes on in my Audi A6?

A common cause is a cracked or corroded ABS ring on the drive shaft, which disrupts the sensor signal. We stock dedicated ABS rings that can be replaced separately without needing to renew the entire drive shaft.

Is it difficult to replace a CV joint on an Audi A6 Avant 4.2 Quattro?

It requires the right tools and mechanical expertise, as the Quattro system is compact. We recommend using a workshop manual or consulting a professional garage to ensure the correct torque settings are applied.

Do you offer a fitment guarantee on drivetrain parts?

Yes, when you select your vehicle's exact make, model and engine, the parts recommended by our system are covered by our fitment guarantee. It is our promise that the part will fit your Audi A6 Avant 4.2 Quattro.