Audi A6 Avant
Car parts and drivetrain components for Audi A6 Avant.
Products for Audi A6 Avant
- Position: Front left, Front right
- Flange diameter: 123 mm
- Total length: 495 mm
- Splines wheel side: 42
- Position: Front, Inner
- Total length: 84 mm
- Splines wheel side: 24
- Position: Front, Outer
- Inner splines: 28
- Outer diameter: 94 mm
- Splines wheel side: 42
- Position: Outer
- Seal diameter: 76,5 mm
- Inner splines: 29
- Outer splines: 42
- Position: Front left
- Flange diameter: 130 mm
- Total length: 488 mm
- Splines wheel side: 42
- Position: Outer
- Seal diameter: 77 mm
- Inner splines: 29
- Outer splines: 42
- Position: Outer
- Seal diameter: 76 mm
- Inner splines: 27
- Outer splines: 42
- Joint diameter: 100 mm
- Position: Front left
- Total length: 617 mm
- Splines wheel side: 38
- Position: Front left
- Flange diameter: 123 mm
- Joint diameter: 123 mm
- Total length: 544 mm
- ABS teeth: 45
- Position: Front right
- Flange diameter: 123 mm
- Total length: 480 mm
- Splines wheel side: 38
- Position: Front right
- Flange diameter: 123 mm
- Total length: 655 mm
- Splines wheel side: 38
- Position: Front right
- Diameter: 123 mm
- Flange diameter: 123 mm
- Joint diameter: 123 mm
- ABS teeth: 45
- Position: Outer
- Seal diameter: 59 mm
- Inner splines: 27
- Outer splines: 38
- Joint diameter: 100 mm
- Position: Rear right
- Total length: 576 mm
- Splines wheel side: 42
- Position: Rear left, Rear right
- Flange diameter: 108 mm
- Total length: 660 mm
- Splines wheel side: 42
- Diameter: 30 mm
- Height: 102 mm
- Hole spacing c/c: 228 mm
- Bearing thickness: 15 mm
- Number of centre bearings: 1
- Number of joints: 3
- Total length: 1,633 mm
- Position: Rear left
- Total length: 620 mm
- Splines wheel side: 42
- Number of centre bearings: 1
- Number of joints: 3
- Total length: 1,763 mm
- Position: Front left
- Flange diameter: 123 mm
- Total length: 605 mm
- Splines wheel side: 38
- Position: Front right
- Flange diameter: 123 mm
- Total length: 525 mm
- Splines wheel side: 38
- Number of centre bearings: 1
- Number of joints: 2
- Total length: 1,800 mm
- Position: Inner
- Seal diameter: 100 mm
- Inner splines: 33
- Joint diameter: 100 mm
Frequently Asked Questions about Drivetrain Parts for Audi A6 Avant – Perfect Fit Spare Parts
How do I know whether the inner or outer CV joint is faulty on my Audi A6 Avant?
A worn outer CV joint typically produces a clicking or knocking noise when taking sharp corners, whilst a faulty inner CV joint tends to cause vibrations through the car's chassis under acceleration, whether you are cornering or driving straight ahead.
Does the same drive shaft fit both manual and automatic Audi A6 Avant models?
No, drive shafts usually differ between manual and automatic gearboxes (such as Multitronic or S-tronic) due to different lengths and gearbox mountings. Always select your car's exact make, model and engine to find the right part.
Why is it important to replace a split CV boot quickly?
The CV boot protects the constant velocity joint from dirt, water and road salt whilst keeping the lubricating grease inside. If it splits, the joint will wear out very quickly, resulting in a much more expensive replacement of the entire CV joint or drive shaft.
My Audi A6 Avant Quattro vibrates at motorway speeds; could it be the propeller shaft?
Yes, an unbalanced propeller shaft or a worn centre bearing is a common cause of vibrations in Quattro models. You will often feel the vibrations coming from beneath the car rather than through the steering wheel.
Do I need to replace the entire drive shaft if only the ABS ring is broken?
No, on most Audi A6 Avant models, you can replace just the ABS ring. This is a considerably more cost-effective solution than replacing the entire driveshaft or the outer CV joint.
Are your parts equivalent to Audi original equipment (OE) parts?
Yes, our car parts are manufactured to the same or higher standards as original components. We choose our suppliers meticulously to guarantee a perfect fit and dependable durability.