Audi A6 Avant RS6 Performance Quattro
Car parts and drivetrain components for Audi A6 Avant RS6 Performance Quattro. Always check the fit before ordering.
Products for Audi A6 Avant RS6 Performance Quattro
- Position: Front left, Front right
- Flange diameter: 123 mm
- Total length: 495 mm
- Splines wheel side: 42
- Position: Rear right
- Total length: 576 mm
- Splines wheel side: 42
- Position: Rear left
- Total length: 620 mm
- Splines wheel side: 42
- Position: Front, Inner
- Total length: 84 mm
- Splines wheel side: 24
- Position: Front, Outer
- Inner splines: 28
- Outer diameter: 94 mm
- Splines wheel side: 42
- Position: Rear
- Total length: 1,645 mm
- Position: Rear left, Rear right
- Diameter: 108 mm
- Flange diameter: 108 mm
- Total length: 660 mm
- Splines wheel side: 42
- Number of joints: 3
- Total length: 1,680 mm
- Height: 85 mm
- Inner diameter: 22 mm
- Outer diameter: 80 mm
- Total length: 498 mm
- Splines wheel side: 42
- ABS teeth: 0
- Position: Front, Inner
- Total length: 88 mm
- Splines gearbox side: 34
- ABS teeth: 34
Frequently Asked Questions about Drivetrain for Audi A6 Avant RS6 Performance Quattro
How do I know if a drive shaft is failing on my RS6 Performance?
The most common signs are vibrations through the car under acceleration or a clicking noise during sharp cornering. At higher speeds, an imbalanced drive shaft can also be felt as a low humming drone or shuddering through the chassis.
Do drive shafts from a standard Audi A6 fit the RS6 Performance model?
No, the RS6 Performance features reinforced components and often different dimensions for both the splines and shaft length to handle the increased power output. Always select your vehicle make, model and engine to find the correct part.
What is included when I buy a drive shaft for my Audi from you?
Our drive shafts are supplied as complete assemblies ready to fit, usually including the inner and outer CV joints as well as CV boots. Always check the specific product description for individual fitting details.
How often should I inspect the CV boots on my Quattro model?
We recommend a visual inspection at every service or seasonal tyre change. Because the RS6 Performance develops immense power, minor cracks in the rubber can quickly tear under load.
Does the fitment guarantee also apply to RS models?
Yes, our fitment guarantee applies to all models, including the Audi RS range, provided that you have matched the part using your car's correct make, model and engine variant.
Why is it important to replace a drive shaft in good time?
In the worst-case scenario, a failing drive shaft can seize or shear completely, causing severe damage to the gearbox, suspension components and potentially leading to an accident.