Audi A6 Avant S6.4 2 Quattro

Spare parts and drivetrain components for Audi A6 Avant S6.4 2 Quattro. Check vehicle fitment by make, model and engine before ordering.

Products for Audi A6 Avant S6.4 2 Quattro

25 products
1 - 24 of 25
Item no.:1197828
  • Position: Front left
  • Splines wheel side: 38
  • Total length: 565 mm
  • Joint diameter: 90 mm
  • ABS teeth: 45
Item no.:2122363
  • Position: Front right
  • Splines gearbox side: 130
  • Splines wheel side: 38
  • Total length: 492 mm
  • ABS teeth: 45
Item no.:2157419
  • Position: Front right
  • Splines wheel side: 38
  • Total length: 662 mm
  • Joint diameter: 88 mm
  • ABS teeth: 45
Item no.:0216226
  • Diameter: 30 mm
  • Bearing thickness: 16 mm
  • Hole spacing c/c: 178 mm
  • Height: 69 mm
Item no.:0459899
  • Position: Inner
  • Inner splines: 28
  • Seal diameter: 108 mm
  • Total length: 32 mm
  • Joint diameter: 108 mm
Item no.:0452314
  • Position: Inner
  • Inner splines: 34
  • Seal diameter: 130 mm
  • Total length: 59,5 mm
  • Joint diameter: 90 mm
Item no.:0587261
  • Position: Outer
  • Inner splines: 27
  • Seal diameter: 59 mm
  • Outer splines: 38
  • ABS teeth: 45
Item no.:0541688
  • Position: Outer
  • Inner splines: 28
  • Splines wheel side: 38
  • Seal diameter: 59 mm
  • ABS teeth: 45
Item no.:0376818
  • ABS teeth: 45
  • Inner diameter: 64 mm
  • Outer diameter: 74 mm
  • Width: 8,1 mm
Item no.:334034
  • ABS teeth: 45
  • Inner diameter: 64 mm
  • Outer diameter: 74 mm
  • Width: 8,1 mm
Item no.:0632285
  • Total length: 89 mm
Item no.:0676118
  • Total length: 92 mm
Item no.:348715
  • Position: Inner
  • Inner splines: 34
  • Seal diameter: 123 mm
  • Total length: 84 mm
  • Joint diameter: 104 mm
Item no.:345752
  • Position: Front right, Inner
  • Inner splines: 28
  • Seal diameter: 50 mm
  • Total length: 300 mm
  • Joint diameter: 102 mm
Item no.:611359
  • Position: Rear
  • Splines wheel side: 38
  • Total length: 620 mm
  • Joint diameter: 98 mm
  • ABS teeth: 45
Item no.:615998
  • Position: Rear
  • Splines wheel side: 38
  • Total length: 618 mm
  • Joint diameter: 90 mm
  • ABS teeth: 45
Item no.:115905
  • Position: Front left
  • Splines wheel side: 38
  • Total length: 623 mm
  • Diameter 1: 98 mm
  • ABS teeth: 45
Item no.:1146602
  • Position: Front left
  • Splines wheel side: 38
  • Total length: 623 mm
  • Joint diameter: 98 mm
  • ABS teeth: 45
Item no.:2154173
  • Position: Front right
  • Splines wheel side: 38
  • Joint diameter: 98 mm
  • Joint diameter, gearbox side: 108 mm
  • ABS teeth: 45
Item no.:610160
  • Position: Rear
  • Splines wheel side: 38
  • Total length: 619 mm
  • Joint diameter: 98 mm
  • ABS teeth: 45
Item no.:350369
  • Position: Front, Outer
  • Inner splines: 30
  • Seal diameter: 59 mm
  • Outer splines: 38
  • ABS teeth: 45
Item no.:0909085
  • Inner diameter: 60 mm
  • Outer diameter: 80 mm
Item no.:0643194
  • Total length: 88 mm
Item no.:0627815
  • Total length: 122 mm
Showing 1–24 of 25 products

Audi A6 Avant S6.4 2 Quattro drivetrain

The Audi A6 Avant S6.4.2 Quattro is a car that blends practical utility with formidable performance. At the heart of its propulsion is the advanced Quattro system, distributing power from the potent 4.2-litre V8 engine to all four wheels. To transfer this power to the road effectively, the drivetrain must be in prime condition. Every component, from the gearbox out to the wheel hubs, operates under high loads, particularly during spirited driving or heavy acceleration. As driveline specialists, we understand the distinct demands placed on an Audi S model. We supply components that match original specifications to preserve your vehicle's handling and safety. Maintaining the drivetrain is vital to avoid costly secondary damage to differentials and the gearbox.

Our product range for the Audi A6 Avant S6.4.2 Quattro is curated to cover the most critical requirements. Whether you need to restore smooth power delivery or eliminate annoying vibrations, we supply the required parts. By choosing the right components from the start, you save both time and money while ensuring your Audi continues to deliver the performance it was engineered for. We are proud to be a Swedish driveline specialist providing both depth and breadth in this niche field.

How the Audi A6 Avant S6.4.2 Quattro drivetrain works

The drivetrain on an Audi A6 Avant S6.4.2 Quattro is an engineering masterpiece of permanent four-wheel drive. The system is built around a longitudinal engine connected to a gearbox with an integrated centre differential. From here, power is directed via a propeller shaft to the rear axle, while the front axle is driven directly from the front section of the gearbox. This setup provides the superb balance and traction for which the Quattro system is renowned. Each wheel is then linked to its respective differential via drive shafts fitted with both inner and outer CV joints.

The outer CV joints allow the wheels to turn whilst transmitting power, whereas the inner CV joints accommodate the vertical travel of the suspension. For a vehicle wearing the S6 badge, these components are dimensioned to handle the substantial torque generated by the V8 engine. In addition, the ABS rings play a central role in the vehicle's safety systems by providing wheel-speed data to both the ABS and traction control. Understanding this complex configuration is key to diagnosing where an issue has originated. Every link in the chain must work flawlessly to ensure the overall driving dynamics remain uncompromised.

Common faults and symptoms

Despite Audi's excellent build quality, the drivetrain remains subject to normal wear and tear. One of the most typical signs of a worn outer CV joint is a rhythmic clicking noise heard on full steering lock, such as when manoeuvring into a parking space. This is often caused by a split CV boot, which allows dirt to enter and grease to escape. If you instead experience chassis vibrations under acceleration, it may indicate that an inner constant velocity joint is failing. These vibrations can easily be mistaken for wheel imbalance, but they are typically linked to engine load.

Another symptom to watch for is vibration occurring at specific road speeds, which can suggest imbalance or wear in the propeller shaft or its centre bearing. If the ABS warning light illuminates or the system engages under normal braking, a cracked or corroded ABS ring is a very probable cause. By addressing these symptoms early, you can often prevent minor wear from turning into complete driveline failure requiring roadside recovery. Listening to your car is the first step in successful maintenance.

Common replacement parts for Audi A6 Avant S6.4.2 Quattro

For the Audi A6 Avant S6.4.2 Quattro, we have identified several key components that regularly require replacement throughout the vehicle's service life. Our stock currently includes 9 high-quality items specifically for this model. Here are the most common categories:

  • Drive shafts: We supply complete, ready-to-fit driveshafts, providing a time-saving solution for severe driveline wear.
  • CV joints: With both outer and inner CV joints in stock, we cover the most frequent needs for curing unwanted noises and vibrations.
  • Propeller shaft: To eliminate driveline vibrations, we offer 1 dedicated propeller shaft tailored to the Quattro system.
  • ABS rings: We supply 1 precision-matched ABS ring to restore the correct operation of your safety systems.

Replacing a complete drive shaft can often be more cost-effective than rebuilding individual joints, as you receive factory-fitted boots and avoid the messy, time-consuming labour of dismantling loose parts. Whichever route you take, our car parts are selected to deliver lasting durability and a precise fit on your Audi S6.

Find the right part for your Audi A6 Avant S6.4.2 Quattro

Select the relevant component section for your Audi A6 Avant S6.4.2 Quattro:

On a vehicle with multiple driveline assemblies, starting in the correct category saves valuable time. By comparing the exact component sections for the Audi A6 Avant S6.4.2 Quattro, it is straightforward to pinpoint issues with a drive shaft, CV joint or prop shaft and navigate to the page best suited to your symptoms and fitment needs.

We always recommend checking physical dimensions or original OEM numbers where accessible as an extra verification step. Our customer service team is also on hand to answer questions if you require guidance on choosing the right spare parts for your car.

Why shop at CVJoint24

CVJoint24 is not merely another generic parts seller; we are your dedicated specialist for drivetrain and power transmission components. As a focused Swedish driveline specialist, we concentrate on exceptional range depth rather than trying to supply every item for every car. This enables us to provide technical expertise rarely found at general motor factors. When you order from us, our meticulous data matching ensures you receive the correct part every time.

We know you want your Audi A6 Avant S6.4.2 Quattro out on the open road rather than stuck on a garage ramp waiting for components. That is why we focus on prompt dispatch across Europe to keep your downtime to a minimum. Our goal is to provide a straightforward, dependable, and efficient online buying experience. Welcome to CVJoint24 – your driveline specialists.

Frequently asked questions about drivetrain parts for Audi A6 Avant S6.4 2 Quattro

How do I know if a drive shaft fits my Audi S6 4.2 Quattro?

The safest way is to select your vehicle by make, model and engine variant in our search tool. Because the S6 model has specific requirements for strength and dimensions, we filter out precisely the 9 items verified for your car.

What are the most common signs of a failing outer CV joint?

The most common symptom is a clicking or knocking noise clearly heard when cornering on full lock. This typically indicates wear in the joint's ball tracks, often caused by a split CV boot.

Can I replace just the ABS ring or do I have to replace the whole CV joint?

On the Audi A6 Avant S6.4 2 Quattro, you can often replace just the ABS ring if the CV joint itself is otherwise in good condition. We provide separate ABS rings to make your repair more cost-effective.

Why does the car vibrate during acceleration but not at a constant speed?

This is a classic sign of a worn inner CV joint. When the engine is under load and power is transferred through the joint at an angle, vibrations occur if there is play or pitting in the joint's internal components.

Are the CV boot and grease included when I buy a CV joint from you?

Yes, when you purchase a CV joint from us, it is supplied as a complete kit with a CV boot, high-grade grease, clamps and any necessary fitting hardware such as bolts or circlips so you can fit it straight away.

How quickly can I get my parts delivered?

We aim for next-day dispatch on all in-stock items. If you order in good time on a working day, your parts are normally dispatched the same day to get your Audi S6 back on the road as quickly as possible.