Audi A6 Avant RS6 Quattro

Spare parts and drivetrain components for Audi A6 Avant RS6 Quattro. Check fitment by make, model and engine before ordering.

Products for Audi A6 Avant RS6 Quattro

44 products
25 - 44 of 44
Item no.:0571726
  • Position: Outer
  • Inner splines: 33
  • Seal diameter: 59 mm
  • Outer splines: 38
  • ABS teeth: 45
Item no.:628658
  • Total length: 1,680 mm
  • Number of joints: 3
  • Number of centre bearings: 1
Item no.:620900
  • Position: Rear
  • Total length: 1,600 mm
Item no.:213575
  • Position: Front right
  • Splines wheel side: 38
  • Total length: 490 mm
  • Joint diameter: 98 mm
  • ABS teeth: 45
Item no.:0562370
  • Position: Front, Outer
  • Inner splines: 29
  • Splines wheel side: 38
  • Outer diameter: 106 mm
Item no.:118486
  • Position: Front left
  • Splines wheel side: 38
  • Total length: 552 mm
  • Diameter 1: 106 mm
  • Diameter 2: 123 mm
Item no.:211571
  • Position: Front right
  • Splines wheel side: 38
  • Total length: 470 mm
  • Diameter 1: 106 mm
  • Diameter 2: 123 mm
Item no.:318643
  • Position: Front
  • Splines wheel side: 38
  • Total length: 544 mm
  • Joint diameter: 98 mm
  • ABS teeth: 45
Item no.:314000
  • Position: Front
  • Splines wheel side: 42
  • Total length: 490 mm
  • Joint diameter: 104 mm
  • Joint diameter, gearbox side: 123 mm
Item no.:648336
  • Position: Rear, Inner
  • Inner splines: 28
  • Seal diameter: 76,5 mm
  • Total length: 77 mm
  • Outer splines: 42
Item no.:0977227
  • Inner diameter: 60 mm
  • Outer diameter: 80 mm
Item no.:0922389
  • Inner diameter: 67 mm
  • Outer diameter: 83 mm
Item no.:0616399
  • Total length: 127 mm
Item no.:0675262
  • Total length: 121 mm
Item no.:343589
  • Position: Front, Inner
  • Inner splines: 34
  • Joint diameter: 85 mm
Item no.:0682789
  • Total length: 122 mm
Item no.:0958243
  • Inner diameter: 73 mm
  • Outer diameter: 90 mm
Showing 25–44 of 44 products

Drivetrain for Audi A6 Avant RS6 Quattro

The Audi A6 Avant RS6 Quattro is an iconic performance vehicle where the drivetrain is subjected to immense stress under every acceleration. The output from the potent engine must be distributed efficiently to all four wheels through the advanced Quattro system, demanding components that not only fit perfectly but also withstand immense torque. Maintaining the car’s unique handling and safety requires premium spare parts specifically engineered for the high demands of the RS series. At CVJoint24, we specialise in these high-performance parts, and our range for this specific model includes carefully selected items that meet or exceed original equipment specifications. Servicing the drivetrain on an RS6 is not merely about basic function; it preserves the car’s value and the exhilarating driving experience Audi engineered. Choosing the correct car parts from a dedicated specialist ensures every horsepower reaches the tarmac without unwanted friction or the risk of expensive transmission failures.

How the drivetrain is engineered on the Audi A6 Avant RS6 Quattro

The drivetrain layout on an Audi A6 Avant RS6 Quattro is a masterclass in engineering, combining raw power with sophisticated mechanical precision. The system centres around a longitudinal propeller shaft for the Audi A6 Avant RS6 Quattro, which transfers power from the gearbox to the rear axle to deliver permanent all-wheel drive. Because this is a Quattro model, the interaction between front and rear axles is vital to the vehicle's dynamic balance. The front suspension is equipped with robust drive shafts that must manage both immense drive torque and wide steering angles, placing heavy demands on the outer CV joints. The rear setup prioritises high-speed stability and maximum traction under heavy load. Every individual component, from the smallest ABS ring for the Audi A6 Avant RS6 Quattro to the complex driveshafts, is calibrated to withstand the intense loads found in an RS car. Due to this complexity, exact precision when selecting replacement car parts is vital to protect the car’s sensitive differentials and electronic stability systems.

Common faults and symptoms

Despite Audi’s renowned build quality, the Audi A6 Avant RS6 Quattro is not immune to wear and tear, especially given the high performance often demanded by its drivers. Common signs of a failing drivetrain include a distinct clicking noise on full steering lock at lower speeds, which almost always points to a worn outer CV joint. Vibrations felt specifically during hard acceleration can instead suggest internal wear in the drive shafts or a failing propeller shaft centre bearing. If you notice a shuddering sensation under braking or the ABS warning light illuminates unexpectedly, it is often caused by a cracked or corroded ABS ring feeding faulty data to the ECU. It is critical to address these warning signs promptly to prevent secondary damage to far costlier assemblies such as the differentials or gearbox. Regular inspection of each CV boot is also simple, cost-effective maintenance; a split boot quickly allows grease to escape and road grit to enter, destroying the constant velocity joint in very little time.

Common replacement parts for the Audi A6 Avant RS6 Quattro

For the Audi A6 Avant RS6 Quattro, specific components routinely require renewal to keep the car running reliably. Our inventory is tailored to these exact requirements, featuring heavy-duty drive shafts engineered to withstand the massive torque outputs of the RS model. We also stock 3 types of outer CV joints, essential for maintaining sharp steering response and smooth power delivery through corners. For reliable power transfer to the rear, we supply direct-fit propeller shafts designed for completely vibration-free running. In addition, the ABS ring is a frequent replacement due to road salt corrosion, and we carry precision-fit rings that guarantee clean signal transmission. Replacing these items proactively at the first indication of wear preserves the seamless power transfer for which the Quattro system is celebrated worldwide. By concentrating on these core drivetrain categories, we deliver specialist expertise and stock availability that general motor factors rarely match, giving you total peace of mind that your car stays in peak mechanical condition.

How to find the correct part for your Audi A6 Avant RS6 Quattro

Navigate directly to the appropriate category for your Audi A6 Avant RS6 Quattro:

On a performance car where several drivetrain components can show similar symptoms, starting in the right section saves time. By comparing the specific subcategories for the Audi A6 Avant RS6 Quattro, it is straightforward to differentiate between issues with a drive shaft, CV joint or prop shaft, allowing you to proceed to the page that matches your car's symptoms and technical specification.

Our fitment guarantee gives you complete confidence when ordering. In the unlikely event that a part does not fit after you have matched your car by make, model and engine, we resolve it quickly and without hassle. This saves time in the garage and eliminates unnecessary returns.

Why buy from CVJoint24?

CVJoint24 is the international shop of a Swedish driveline specialist, supplying drivetrain and transmission components across Europe from our central warehouse in Helsingborg, Sweden. We stand out through deep technical expertise and a focus on stocking car parts robust enough for demanding performance cars like the Audi A6 Avant RS6 Quattro. When you order from us, you receive a quality-assured component engineered to cope with harsh European driving conditions and the stresses of spirited driving. We supply dependable parts at competitive prices, supported by efficient logistics for rapid dispatch across the EU. Our customer support team understands the mechanical nuances of your Audi, delivering practical and accurate technical advice. Backed by our fitment guarantee to ensure you get the right part first time, we are the obvious choice for any Audi owner unwilling to compromise on performance, durability or safety.

Frequently asked questions about drivetrain parts for Audi A6 Avant RS6 Quattro

How do I know that the drive shaft will fit my Audi A6 Avant RS6 Quattro?

By selecting your car's make, model, and engine variant, our catalogue filters the range to display precisely the parts that fit your vehicle. We also offer a fitment guarantee for your peace of mind.

What are the most common signs of a worn CV joint on an RS6?

The most common symptoms are clicking or knocking noises when cornering, along with steering wheel vibrations during acceleration. You should also check that the CV boot is intact, as grease leaks often lead to rapid wear.

Are your propeller shafts balanced upon delivery?

Yes, all our propeller shafts for the Audi A6 Avant RS6 Quattro are factory precision-balanced to guarantee smooth, vibration-free operation in your Quattro system.

Can I replace just the ABS ring, or do I need to replace the entire CV joint?

On many Audi models, including the RS6, you can often replace just the ABS ring if the CV joint is otherwise in good working order. We stock specific ABS reluctor rings for this exact purpose.

How quickly can I get my spare parts delivered?

We dispatch all in-stock items quickly from our central warehouse so you can get your Audi A6 Avant RS6 Quattro back on the road without unnecessary delay.

Can your parts withstand the high torque output of an RS6?

Absolutely. Our components are selected specifically to meet the high strength and precision demands required by Audi RS models, ensuring long-lasting durability even under extreme loads.