Audi A8 S8 Quattro

Spare parts and drivetrain components for the Audi A8 S8 Quattro. Confirm fitment using your make, model and engine before ordering.

Products for Audi A8 S8 Quattro

48 products
1 - 24 of 48
Item no.:1160240
  • Position: Front left
  • Splines wheel side: 38
  • Total length: 558 mm
  • Joint diameter: 106 mm
  • Joint diameter, gearbox side: 123 mm
Item no.:2105522
  • Position: Front right
  • Splines wheel side: 38
  • Total length: 480 mm
  • Joint diameter: 100 mm
  • Joint diameter, gearbox side: 123 mm
Item no.:0298628
  • Diameter: 30 mm
  • Bearing thickness: 16 mm
  • Hole spacing c/c: 189 mm
  • Height: 59 mm
Item no.:0556071
  • Position: Outer
  • Inner splines: 27
  • Seal diameter: 59 mm
  • Outer splines: 38
  • Thread size: M16 x 1,5
Item no.:6183555
  • Position: Rear
  • Splines wheel side: 38
  • Total length: 660 mm
Item no.:0416509
  • Position: Front, Inner
  • Inner splines: 24
  • Total length: 84 mm
  • Joint diameter: 81 mm
  • Outer splines: 24
Item no.:7311875
  • Position: Inner
  • Inner splines: 34
  • Seal diameter: 123 mm
  • Total length: 84 mm
  • Joint diameter: 104 mm
Item no.:0482404
  • Position: Inner
  • Inner splines: 28
  • Seal diameter: 108 mm
  • Total length: 32 mm
  • Joint diameter: 108 mm
Item no.:0487813
  • Position: Inner
  • Inner splines: 34
  • Seal diameter: 130 mm
  • Total length: 59,5 mm
  • Joint diameter: 90 mm
Item no.:0552667
  • Position: Outer
  • Inner splines: 27
  • Seal diameter: 59 mm
  • Outer splines: 38
  • ABS teeth: 45
Item no.:0319007
  • Position: Front
  • ABS teeth: 45
  • Inner diameter: 77 mm
  • Outer diameter: 81 mm
  • Width: 11 mm
Item no.:330564
  • ABS teeth: 45
  • Inner diameter: 77 mm
  • Outer diameter: 81 mm
  • Width: 11 mm
Item no.:0649869
  • Total length: 92 mm
Item no.:0896520
  • Inner diameter: 30 mm
Item no.:3187839
  • Position: Front
  • Splines wheel side: 42
  • Total length: 495 mm
  • Joint diameter: 88 mm
  • Joint diameter, gearbox side: 123 mm
Item no.:5173366
  • Position: Rear right
  • Splines wheel side: 42
  • Total length: 576 mm
Item no.:6101684
  • Position: Rear
  • Splines wheel side: 42
  • Total length: 660 mm
  • Joint diameter: 99 mm
  • Joint diameter, gearbox side: 108 mm
Item no.:0451365
  • Position: Inner
  • Inner splines: 34
  • Total length: 88 mm
  • Joint diameter: 123 mm
  • Outer splines: 34
Item no.:0216661
  • Total length: 1,856 mm
  • Number of joints: 3
  • Outer diameter 1: 90 mm
  • Outer diameter 2: 99,73 mm
  • Bolt circle diameter 2: 86 mm
Item no.:6261110
  • Position: Rear
  • Total length: 1,675 mm
  • Number of joints: 3
  • Number of centre bearings: 1
Item no.:4146905
  • Position: Rear left
  • Splines wheel side: 42
  • Total length: 620 mm
  • Diameter 2: 108 mm
Item no.:0899368
  • Inner diameter: 30 mm
Item no.:0644744
  • Total length: 108 mm
  • Inner diameter: 22 mm
  • Outer diameter: 80 mm
  • Height: 85 mm
Showing 1–24 of 48 products

Audi A8 S8 Quattro drivetrain

The Audi A8 S8 Quattro represents the pinnacle of German engineering, combining extreme performance with sophisticated luxury. Coping with this potent engine and the advanced four-wheel drive setup demands a drivetrain in peak condition. At CVJoint24, you will find a carefully curated range of specific components tailored precisely to this model. We understand that an S8 places significantly higher demands on its running gear than standard models, especially regarding torque capacity and durability. Our focus is on providing car parts that not only fit physically, but also endure the heavy stresses imposed by the Quattro system. Choosing the right components ensures your car’s handling remains pin-sharp and power delivery stays smooth, quiet and loss-free.

How the drivetrain is engineered on the Audi A8 S8 Quattro

The drivetrain on an Audi A8 S8 Quattro is an intricate system designed to distribute power seamlessly across all four wheels. It relies on several critical components working in unison. At the heart of the design is the propeller shaft, which directs torque to the rear axle, whilst the drive shafts handle the final power delivery directly to the wheels. For this specific model, we have organised our range to match the car’s unique requirements: we stock drive shafts, outer CV joints, inner CV joints, prop shafts and ABS rings. This setup reflects the S8’s bespoke technical layout, where every component is engineered to withstand the car’s substantial kerb weight and relentless acceleration. Understanding this architecture is crucial when selecting the correct spare parts for maintenance or repairs.

Common faults and symptoms

Despite the exceptional build quality of the Audi A8 S8 Quattro, drivetrain components are subject to everyday wear and tear. One of the clearest signs of a failing outer CV joint on an Audi A8 S8 Quattro is a rhythmic clicking or knocking noise on full steering lock during acceleration. If you notice vibrations through the floorpan or chassis while accelerating, this often points towards wear in an inner CV joint. On Quattro models, it is equally important to listen for driveline imbalance or strange noises from beneath the centre of the car, which typically indicate a worn propeller shaft. Furthermore, erratic signals from a cracked ABS reluctor ring can cause sudden pulsing in the brake pedal or trigger warning lights on the dashboard. Spotting these symptoms early saves money and prevents secondary damage to other costly drivetrain parts.

Common replacement parts for the Audi A8 S8 Quattro

When servicing or repairing your Audi A8 S8 Quattro, certain components naturally need attention more often than others. Drive shafts and constant velocity joints are the most exposed parts due to continuous articulation and exposure to road grime and weather. We recommend inspecting the CV boots regularly, as a split or deteriorated boot quickly lets grease escape and allows dirt to ruin the joint. Here are the most common component categories for your car:

  • Drive shafts: Complete units for quick, reliable and safe replacement.
  • CV joints: Both inner and outer options for targeted driveline repairs.
  • Propeller shafts: Essential for smooth, vibration-free operation in the Quattro system.
  • ABS rings: Crucial for the vehicle’s safety systems and proper braking performance.
Keeping these assemblies in top condition preserves the refined, effortless driving dynamic that defines the S8.

How to find the right part for your Audi A8 S8 Quattro

Navigate directly to the relevant section for your Audi A8 S8 Quattro:

When diagnosing drivetrain issues, it pays to narrow down the correct category straight away. Comparing the dedicated sections for the Audi A8 S8 Quattro makes it straightforward to distinguish between faults in a driveshaft, a CV joint or the propeller shaft, leading you directly to the parts that match your symptoms and exact fitment.

Finding the correct replacement parts can feel daunting, particularly for a technically sophisticated model like the Audi S8. To make sure you get the exact fit, simply filter by your car’s make, model and engine variant on our site. This narrows the selection to components verified for your exact vehicle specification. Remember to check specific technical details such as the tooth count on the ABS ring or the overall length of the drive shaft, as these can vary depending on model year and trim. Our shop is designed to make ordering effortless. Here are direct links to our most popular categories for your vehicle:

  • Drive shafts for Audi A8 S8 Quattro
  • Outer CV joints for Audi A8 S8 Quattro
  • Inner CV joints for Audi A8 S8 Quattro
  • Propeller shafts for Audi A8 S8 Quattro
  • ABS rings for Audi A8 S8 Quattro

Why shop with CVJoint24

As the international shop of a Swedish driveline specialist shipping from our central warehouse in Helsingborg, Sweden, we combine dedicated technical expertise with deep stock availability across the EU. When buying parts for your Audi A8 S8 Quattro from us, you receive premium-quality components engineered to meet or exceed original equipment standards. We back our range with an accurate fitment guarantee when you select your vehicle by make, model and engine variant. Thanks to our streamlined logistics, we ship orders swiftly throughout Europe so your car spends minimal time off the road or in the garage. Our goal is to help you pick the right part first time and have it delivered directly to your doorstep or workshop.

Frequently asked questions about drivetrain parts for Audi A8 S8 Quattro

How do I know if my Audi A8 S8 Quattro needs a new drive shaft?

Common signs include vibrations under acceleration or unusual noises from the wheel arches. If the vibrations increase with speed, it is often an inner CV joint or the drive shaft itself that is worn.

Do all Audi A8 CV joints fit an S8 Quattro?

No, the S8 model often features reinforced components designed to handle higher torque. Always select your car's make, model and engine to ensure the exact fit for your specific variant.

What causes a clicking noise when turning in my S8?

This is a classic symptom of a worn outer CV joint. As the bearings inside the joint wear down, play develops, which is most noticeable at full steering lock.

Can I replace just the ABS ring or do I have to replace the whole CV joint?

On many Audi models, including the A8 S8 Quattro, the ABS ring can be replaced separately if the CV joint itself is otherwise in good condition, making it a cost-effective solution.

Why does my car vibrate even though the wheels are balanced?

If the wheels are correctly balanced but the vibrations persist, the issue often lies within the propeller shaft or the inner CV joints, which cannot be balanced in the same way as a wheel.

How quickly can I receive spare parts for my Audi?

We aim for next-day dispatch on all stocked items so that you can get your Audi A8 S8 Quattro back on the road quickly.