Audi TT 1.8 T Quattro

Spare parts and drivetrain components for Audi TT 1.8 T Quattro. Check fitment by selecting your make, model and engine before ordering.

Products for Audi TT 1.8 T Quattro

26 products
1 - 24 of 26
Item no.:0235156
  • Diameter: 30 mm
  • Hole spacing c/c: 188 mm
  • Bearing thickness: 13 mm
Item no.:0423419
  • Position: Inner
  • Seal diameter: 100 mm
  • Inner splines: 33
  • Joint diameter: 100 mm
Item no.:0564887
  • Position: Outer
  • Seal diameter: 53 mm
  • Inner splines: 27
  • Outer splines: 36
Item no.:0264419
  • Number of centre bearings: 1
  • Number of joints: 1
  • Total length: 2,160 mm
Item no.:2109840
  • Position: Front right
  • Flange diameter: 108 mm
  • Total length: 615 mm
  • Splines wheel side: 36
Item no.:0507901
  • Position: Outer
  • Seal diameter: 53 mm
  • Inner splines: 30
  • Outer splines: 36
  • Joint diameter: 81 mm
Item no.:1156984
  • Position: Front left
  • Flange diameter: 108 mm
  • Total length: 488 mm
  • Splines wheel side: 36
Item no.:418440
  • Position: Rear left
  • Diameter: 81 mm
  • Total length: 650 mm
  • Splines wheel side: 36
Item no.:514627
  • Position: Rear right
  • Diameter: 81 mm
  • Total length: 523 mm
  • Splines wheel side: 36
Item no.:623719
  • Position: Rear
  • Total length: 2,049 mm
Item no.:1126740
  • Position: Front left
  • Total length: 584 mm
  • Splines gearbox side: 26
  • Splines wheel side: 36
Item no.:2135398
  • Position: Front right
  • Total length: 860 mm
  • Splines gearbox side: 26
  • Splines wheel side: 36
Item no.:0465508
  • Position: Inner
  • Inner splines: 28
  • Joint diameter: 108 mm
Item no.:1110303
  • Position: Front left
  • Flange diameter: 108 mm
  • Total length: 518 mm
  • Splines wheel side: 36
Item no.:2117707
  • Position: Front right
  • Flange diameter: 108 mm
  • Total length: 655 mm
  • Splines wheel side: 36
Item no.:0520069
  • Position: Outer
  • Seal diameter: 59 mm
  • Inner splines: 27
  • Outer splines: 36
  • Joint diameter: 97,95 mm
Item no.:0649685
  • Height: 85 mm
  • Inner diameter: 22 mm
  • Outer diameter: 80 mm
Item no.:0495642
  • Position: Inner
  • Seal diameter: 94 mm
  • Inner splines: 33
  • Number of joints: 3
  • ABS teeth: 0
Item no.:0534482
  • Position: Outer
  • Seal diameter: 53 mm
  • Inner splines: 27
  • Outer splines: 36
  • Joint diameter: 97,5 mm
Item no.:0580782
  • Position: Outer
  • Inner splines: 30
  • Outer diameter: 81 mm
  • Splines wheel side: 36
Item no.:415197
  • Position: Rear left
  • Diameter: 81 mm
  • Total length: 650 mm
  • Splines wheel side: 36
Item no.:517960
  • Position: Rear right
  • Diameter: 81 mm
  • Total length: 523 mm
  • Splines wheel side: 36
Showing 1–24 of 26 products

Drivetrain for Audi TT 1.8 T Quattro

The Audi TT 1.8 T Quattro is an iconic sports car in which the drivetrain plays an essential role in delivering the vehicle's celebrated handling and performance. The Quattro system in this model is specifically engineered to handle the torque output of the turbocharged 1.8-litre engine, distributing power effectively between the front and rear wheels for maximum traction. Maintaining the precision and safety for which Audi is renowned requires components manufactured to the highest technical standards. At CVJoint24, we understand the specific demands of the 1.8 T Quattro variant and supply a range tailored to meet these needs without compromise.

Maintaining the drivetrain on a four-wheel-drive car such as the Audi TT is not merely about preserving driving pleasure, but also about preventing costly secondary damage to the gearbox, Haldex coupling, and differentials. Worn components can create imbalances that gradually damage bearings and seals throughout the power transmission system. By choosing the correct spare parts from a dedicated specialist, you ensure your car remains dependable for many kilometres to come, whether for everyday motoring or spirited driving on winding country roads.

How the drivetrain is configured on the Audi TT 1.8 T Quattro

The layout of the drivetrain on an Audi TT 1.8 T Quattro is technically sophisticated and relies on several critical components working in unison. As a car with a transverse engine and all-wheel drive, it uses a Haldex coupling to manage power delivery to the rear axle. This means the car is equipped with both front and rear drive shafts, as well as a central propeller shaft running along the underside. In total, our range for this specific model comprises 17 matched items, including 6 different drive shafts and several dedicated joints to cover every position on the vehicle.

Power travels from the gearbox via a bevel box to the prop shaft, which in turn drives the rear differential. Every link in this chain, from the smallest ABS ring to the robust prop shaft, must operate in complete harmony to eliminate vibrations and power loss. On the Quattro model, components are often more robustly dimensioned than on front-wheel-drive versions to handle the extra load, making it especially vital to select parts matching the exact specifications of the 1.8 T Quattro drivetrain.

Common faults and symptoms

There are several distinct signs indicating that a drivetrain component on your Audi TT is worn and due for replacement. One of the most common symptoms is a rhythmic clicking or knocking sound on full steering lock while moving, which almost invariably points to a worn outer CV joint. This often stems from a split CV boot that has allowed road grime to enter and lubricating grease to escape, quickly destroying the joint's precision surfaces.

If you experience vibrations through the chassis or steering wheel instead, particularly under hard acceleration, this can signal an issue with an inner constant velocity joint or an imbalance in the propeller shaft. For Quattro owners, it is equally important to listen out for whining or humming noises from beneath the centre of the car, which can frequently be traced back to the centre bearing on the prop shaft. Finally, a cracked or corroded ABS reluctor ring can trigger premature ABS pulsation at low speeds or illuminate warning lights on the dashboard, directly affecting the vehicle's safety systems and demanding immediate attention.

Common parts to replace on the Audi TT 1.8 T Quattro

On the Audi TT 1.8 T Quattro, certain components are subjected to greater wear than others due to the car's sporting nature and permanent four-wheel drive. Here are the key categories in our range that are critical to the vehicle's operation:

  • Drive shafts: We supply 6 variants of drive shafts to cover both front and rear axle applications.
  • CV joints: Both inner and outer joints are exposed to severe stresses. We stock 4 outer and 3 inner joints specifically for this model.
  • Propeller shaft: A pivotal part of the Quattro system. We provide 2 specific options for the prop shaft.
  • ABS rings: A small yet essential component to ensure the car's braking and traction control systems operate correctly.

By replacing worn parts promptly, you prevent vibrations from propagating and damaging other expensive components in the transmission, such as differentials or gearbox outputs. Keeping the drivetrain in prime condition is an investment in both your safety and the car's future resale value.

How to find the right part for your Audi TT 1.8 T Quattro

Navigate directly to the appropriate subcategory for your Audi TT 1.8 T Quattro:

On a vehicle with several possible drivetrain issues, it pays to start in the right category straight away. By comparing the exact component sections for the Audi TT 1.8 T Quattro, it is straightforward to distinguish between faults in a drive shaft, CV joint, or propeller shaft and proceed to the section that best matches your symptoms and fitment.

Identifying the exact component required for your Audi TT 1.8 T Quattro can be challenging, as technical variations exist across model years, gearbox types, and chassis numbers. The most reliable way to obtain the correct part is to select your car's make, model, and engine variant in our store selector. This automatically filters the products uniquely matched to your vehicle's specifications, minimising the risk of ordering incorrect parts. We have meticulously indexed our 17 available items to help you find the right fit quickly.

Always verify technical details such as the tooth count on the ABS ring or the overall length of the driveshaft if you are carrying out the repair yourself. Because Quattro models feature an entirely different rear suspension setup and frequently differ in front dimensions compared to front-wheel-drive variants, it is critical to select parts listed specifically for the 1.8 T Quattro. Our catalogue is structured to help you choose accurately, and our technical support team is on hand should you need to verify any specification before ordering.

Why shop with CVJoint24

CVJoint24 is the international shop of a Swedish driveline specialist, supplying everything related to vehicle power transmission. We combine an extensive, dedicated range with specialist technical expertise that few general parts retailers can match. When you order from us, you receive high-calibre car parts backed by our fitment accuracy, with components rigorously tested to withstand tough European conditions. We appreciate how important it is for your Audi TT 1.8 T Quattro to run flawlessly.

With efficient dispatch across the EU from our central Swedish warehouse, we help you get your car back on the road without unnecessary delay. As passionate driveline specialists, we always strive to deliver the right part at competitive prices. By choosing a focused specialist like CVJoint24, you gain access to components selected for lasting durability and precision fit. Partner with a specialist that understands your vehicle's technical requirements and prioritises your driving experience and safety at every turn.

Frequently Asked Questions about Drivetrain for Audi TT 1.8 T Quattro

How do I know if a drive shaft fits both front and rear on my Audi TT Quattro?

No, the front and rear drive shafts on the Audi TT 1.8 T Quattro differ in length and fittings. Select your vehicle's exact make, model and engine to see precisely which position each drive shaft is designed for.

What are the most common symptoms of a failing outer CV joint?

The most common sign is a clicking noise clearly heard when making sharp turns at low speed. The noise typically speeds up in time with wheel rotation.

Do CV joints from a front-wheel-drive Audi TT fit my Quattro model?

Usually not. Quattro models often feature different spline counts and joint dimensions to cope with the all-wheel-drive system. Always select your specific model and engine variant to ensure the correct fitment.

Why does my Audi TT vibrate during acceleration?

Vibrations during acceleration are frequently caused by wear in the inner CV joints or an unbalanced propeller shaft. A worn prop shaft centre bearing can also be the culprit.

What happens if the ABS ring on my Audi TT breaks?

A cracked ABS ring sends false signals to the control unit, which can cause the ABS to pulse during normal braking or trigger the ABS/ESP warning light on the dashboard.

Are the CV boot and grease included when I buy a CV joint from you?

Yes, when you purchase a complete CV joint from CVJoint24, it usually includes a model-specific CV boot, high-grade grease and the necessary fitting accessories such as clips and bolts.