BMW 3 Touring

Welcome to your specialist for BMW 3 Touring drivetrain parts. As a Swedish driveline specialist, we offer an extensive range of high-grade transmission components tailored precisely to...

Choose version

Choose a version to refine the results and get closer to the right product.

Products for BMW 3 Touring

313 products
25 - 48 of 313
Item no.:0642674
  • Total length: 110 mm
Item no.:0952087
  • Inner diameter: 44 mm
  • Outer diameter: 67 mm
Item no.:698909
  • Position: Rear
Item no.:397378
  • Position: Front
Item no.:699056
  • Position: Rear
Item no.:411062
  • Position: Rear left
  • Splines wheel side: 27
  • Total length: 612 mm
  • Joint diameter: 86 mm
  • ABS teeth: 48
Item no.:411656
  • Position: Rear left
  • Splines wheel side: 30
  • Total length: 613 mm
  • Joint diameter: 83 mm
  • Joint diameter, gearbox side: 93 mm
Item no.:112024
  • Position: Front left
  • Splines gearbox side: 27
  • Splines wheel side: 37
  • Total length: 557 mm
Item no.:616447
  • Position: Rear right
  • Splines wheel side: 30
  • Total length: 657 mm
  • Flange diameter: 108 mm
  • ABS teeth: 48
Item no.:512325
  • Position: Rear right
  • Splines wheel side: 30
  • Total length: 672 mm
  • Joint diameter: 83 mm
  • Joint diameter, gearbox side: 93 mm
Item no.:210267
  • Position: Front right
  • Splines gearbox side: 27
  • Splines wheel side: 37
  • Total length: 857 mm
Item no.:614084
  • Position: Rear
  • Splines wheel side: 27
  • Total length: 625 mm
  • Joint diameter: 86 mm
  • ABS teeth: 48
Item no.:516888
  • Position: Rear right
  • Splines wheel side: 27
  • Total length: 675 mm
  • Joint diameter: 86 mm
  • ABS teeth: 48
Item no.:514132
  • Position: Rear right
  • Splines wheel side: 27
  • Total length: 664 mm
  • Joint diameter: 86 mm
  • ABS teeth: 48
Item no.:512680
  • Position: Rear right
  • Splines gearbox side: 27
  • Splines wheel side: 28
  • Total length: 805 mm
  • Joint diameter: 77 mm
Item no.:2155796
  • Position: Front right
  • Splines gearbox side: 25
  • Splines wheel side: 24
  • Total length: 865 mm
  • ABS teeth: 48
Item no.:640517
  • Position: Inner
  • Inner splines: 25
  • Total length: 32 mm
  • Joint diameter: 100 mm
Item no.:322445
  • Position: Front
  • Total length: 738 mm
  • Number of joints: 2
  • Outer diameter 1: 47 mm
  • Bolt circle diameter 1: 77 mm
Item no.:626014
  • Total length: 1,452 mm
  • Number of joints: 2
  • Number of centre bearings: 1
Showing 25–48 of 313 products

Drivetrain for BMW 3 Touring

The BMW 3 Touring represents a perfect balance between everyday practicality and sporty driving dynamics. Maintaining its renowned handling requires a drivetrain in first-class condition. The drivetrain is the system that transfers power from the engine to the wheels, and on a BMW 3 Touring this setup is often sophisticated, whether rear-wheel drive or fitted with the xDrive all-wheel-drive system. At CVJoint24, we specialise in precisely these components so that you can source the correct parts without hassle. With a comprehensive range for this specific model, we cover everything from the smallest CV boots to complete shafts.

Owning a BMW 3 Touring means valuing precision. Every component in the power transmission, from the gearbox via the propeller shaft to the drive shafts, must operate seamlessly together. Wear in these parts compromises not only comfort but also safety and road holding. By choosing the right drivetrain components, you ensure your car continues to deliver the performance expected of the marque. Our focus is on supplying parts that match or exceed original specifications, which is vital for a vehicle engineered to the high technical standard of the BMW 3 Touring.

How the BMW 3 Touring drivetrain is built

The drivetrain layout in a BMW 3 Touring follows BMW's classic longitudinal engine design. Power travels from the gearbox via a propeller shaft for the BMW 3 Touring to the rear differential. On xDrive models, power is also distributed to the front axle through a transfer box and a front prop shaft. This configuration places high demands on all drivetrain parts, especially rotating assemblies exposed to heavy torque under acceleration and engine braking. The prop shaft is supported by a centre bearing for the BMW 3 Touring, which minimises vibrations and keeps the shaft properly centred during operation.

Further out at the wheels, you find the drive shafts. Each drive shaft is fitted with two joints: an inner and an outer. The inner joint sits next to the differential and allows the shaft to plunge axially as the suspension moves. The outer joint sits at the wheel hub, accommodating suspension travel and steering articulation. On a BMW 3 Touring, these parts are engineered to manage the car's weight and power, but they remain exposed to road grime, weather and mechanical wear. Understanding this assembly is the key to identifying where a drivetrain fault has developed.

Common faults and symptoms

There are several distinct signs that a drivetrain component on your BMW 3 Touring is starting to fail. One of the most frequent symptoms is a clicking or knocking noise on full steering lock at low speeds. This is a classic sign of a worn outer CV joint on the BMW 3 Touring, often caused by a split CV boot that has let grease escape and road dirt in. If you feel shuddering through the whole car under hard acceleration, the issue can often be traced to an inner CV joint on the BMW 3 Touring or prop shaft imbalance.

Vibrations felt at specific road speeds, often between 80 and 100 km/h, typically point towards a worn prop shaft centre bearing or perished rubber mounting bushings. If the vibration is felt through the seat rather than the steering wheel, the rear section of the drivetrain is usually the cause. It is crucial to address these symptoms early, as a worn constant velocity joint or failing centre bearing can cause secondary damage to the differential or gearbox. Regular inspection of each drive shaft boot is the best preventative maintenance, as an intact boot keeps lubricant sealed inside and contaminants out.

Common replacement parts for BMW 3 Touring

Across our range for the BMW 3 Touring, certain components are serviced and replaced most frequently. We stock multiple variants of the drive shaft for the BMW 3 Touring, catering to the extensive list of engine options and driveline setups available across generations. Replacing a complete driveshaft is often the most economical choice when both the inner and outer joints show wear. In addition to complete shafts, we stock dedicated outer CV joints and inner CV joints for repairs where only one joint needs attention.

The propeller shaft and its support hardware are also common service items. With multiple propeller shafts and centre bearing options in stock for the BMW 3 Touring, we can help you resolve drivetrain vibrations and drumming noises from underneath the floorpan. The centre bearing is a notable wear item as its surrounding rubber surround can harden and perish with age, allowing the prop shaft to oscillate. Replacing these worn parts restores your car's factory refinement and quiet cruising.

How to find the right part for your BMW 3 Touring

Navigate directly to the relevant subcategory for your BMW 3 Touring:

On a vehicle with several interdependent driveline components, selecting the correct subcategory first makes troubleshooting straightforward. By filtering specifically for your BMW 3 Touring, you can distinguish easily between drive shaft, CV joint or prop shaft faults and find the exact part to match your symptoms and vehicle specification.

When selecting your parts, check whether your car has a manual or automatic gearbox, and whether it is an xDrive model, as these factors affect the length and design of both drive shafts and prop shafts. Our database is kept up to date to cater for these variations, and our customer support team is on hand if you require technical guidance for your car's drivetrain. We make maintaining your BMW with correct-fit parts as simple as possible.

Why buy from CVJoint24

CVJoint24 is not just another general car parts shop; we are the international store of a Swedish driveline specialist, focusing exclusively on drivetrain and power transmission components. When ordering from us, you benefit from product expertise that broad-range suppliers rarely provide. We understand the technical nuances of the BMW 3 Touring and curate our stock to meet high standards of durability and fitment. With our fitment guarantee, you can be completely confident that the parts you select for your specific make, model and engine will fit properly.

We know that driveline failures require prompt attention to keep your car on the road. That is why we ship quickly across Europe from our warehouse in Helsingborg, Sweden. Combining swift dispatch with dedicated driveline knowledge and competitive pricing is what we do best. From an individual CV joint boot to a complete prop shaft assembly, you will find the right component here. Trust CVJoint24 to supply your BMW 3 Touring with the quality parts it needs for many more kilometres of driving pleasure.

Frequently asked questions about drivetrain parts for the BMW 3 Touring

How do I know which drive shaft fits my BMW 3 Touring?

The most reliable way is to select your vehicle's exact make, model and engine variant in our search tool. Because the BMW 3 Touring is available with many different engines and drivetrain setups (RWD/xDrive), choosing the correct specification ensures you receive the right length and splines for your specific car.

What are the most common symptoms of a worn outer CV joint?

A classic sign is a clicking or knocking noise heard when making a sharp turn, for example when parking. The frequency of the noise typically increases with the car's speed while turning.

Why does my BMW 3 Touring vibrate under acceleration?

Vibrations under load are often caused by wear in the inner CV joint or an imbalance in the propeller shaft. If the vibration disappears when you lift off the accelerator, this is a strong indication that the issue lies within the drivetrain.

What does a centre bearing do on a BMW 3 Touring?

The centre bearing supports the propeller shaft in position and dampens vibrations from the rotating shaft. If the rubber mounting in the bearing deteriorates, it can cause severe vibrations and unusual noises from underneath the vehicle.

Do you provide a fitment guarantee on BMW driveline parts?

Yes, we always provide a fitment guarantee when you choose parts tailored to your specific vehicle model and engine. This ensures the part is guaranteed to fit your car's exact factory specification.

How quickly can I receive my spare parts?

We offer fast delivery across Europe on most of our 182 products for the BMW 3 Touring, provided the item is in stock and your order is placed in good time.

Is it difficult to replace a drive shaft yourself on a BMW 3 Touring?

It requires appropriate tools and mechanical experience, particularly as BMW models often use specialised fasteners and specific torque settings. We recommend consulting a workshop manual or seeking assistance from a professional garage if you are unsure.