BMW 7

Welcome to your drivetrain specialist for the BMW 7. As Swedish driveline experts, we supply an extensive range of high-quality components tailored specifically to your car's power...

Choose version

Choose a version to refine the results and get closer to the right product.

Products for BMW 7

100 products
49 - 72 of 100
Item no.:241296
  • Position: Front right, Inner
  • Inner splines: 24
  • Seal diameter: 44 mm
  • Total length: 485 mm
  • Outer splines: 27
Item no.:149214
  • Position: Front left, Inner
  • Inner splines: 24
  • Seal diameter: 44 mm
  • Total length: 184 mm
  • Joint diameter: 82 mm
Item no.:357985
  • Position: Outer
  • Inner splines: 25
  • Splines wheel side: 37
  • Total length: 73 mm
  • Splines gearbox side: 25
Item no.:329088
  • Position: Front
  • Total length: 809 mm
  • Outer diameter 1: 47 mm
  • Bolt circle diameter 1: 77 mm
Item no.:626814
  • Position: Rear
Item no.:0824617
  • Inner diameter: 35 mm
Item no.:519161
  • Position: Rear right
  • Splines gearbox side: 32
  • Splines wheel side: 30
  • Total length: 828 mm
Item no.:115194
  • Position: Front left
  • Splines gearbox side: 27
  • Splines wheel side: 37
  • Total length: 573 mm
  • Joint diameter: 88 mm
Item no.:215646
  • Position: Front right
  • Splines gearbox side: 27
  • Splines wheel side: 37
  • Total length: 873 mm
  • Joint diameter: 88 mm
Item no.:0472839
  • Position: Inner
  • Inner splines: 28
  • Seal diameter: 108 mm
  • Total length: 32 mm
  • Joint diameter: 108 mm
Item no.:340678
  • Position: Front right, Inner
  • Inner splines: 28
  • Seal diameter: 50 mm
  • Total length: 300 mm
  • Joint diameter: 102 mm
Item no.:695804
  • Position: Rear
Item no.:418247
  • Position: Rear left
  • Splines gearbox side: 32
  • Splines wheel side: 30
  • Total length: 774 mm
  • Diameter 1: 96 mm
Item no.:519324
  • Position: Rear right
  • Splines gearbox side: 32
  • Splines wheel side: 30
  • Total length: 826 mm
  • Diameter 1: 96 mm
Item no.:359994
  • Position: Outer
  • Inner splines: 25
  • Seal diameter: 65 mm
  • Outer splines: 37
  • Thread size: M16X1,5
Item no.:329004
  • Position: Front
  • Total length: 730 mm
  • Number of joints: 2
  • Outer diameter 1: 47 mm
  • Bolt circle diameter 1: 77 mm
Item no.:391932
  • Total length: 56 mm
  • Diameter: 24 mm
Item no.:514245
  • Position: Rear right
  • Splines gearbox side: 32
  • Splines wheel side: 30
  • Total length: 830 mm
Item no.:6460217
  • Position: Inner
  • Inner splines: 28
  • Outer diameter: 108 mm
Item no.:614948
  • Position: Rear
  • Total length: 422 mm
  • Joint diameter: 108 mm
  • Joint diameter, gearbox side: 108 mm
  • Diameter 1: 108 mm
Item no.:410155
  • Position: Rear left
  • Splines gearbox side: 32
  • Splines wheel side: 30
  • Total length: 777 mm
  • Joint diameter: 94 mm
Item no.:0916003
  • Inner diameter: 43 mm
  • Outer diameter: 90 mm
Showing 49–72 of 100 products

Drivetrain for BMW 7

The BMW 7 Series represents the pinnacle of German engineering and luxury, placing exceptionally high demands on every component in the car's drivetrain. As an owner of a BMW 7, you expect a silky smooth ride and outstanding power delivery, whether you drive a classic rear-wheel-drive variant or a modern xDrive model. The drivetrain is the heart of the car's dynamic performance, responsible for transmitting the engine's power to the road surface with precision. At CVJoint24, we understand the technical nuances of this model series. With 56 specifically matched items in our range, we offer an in-depth expertise that few others can match.

Maintaining the drivetrain on a BMW 7 is not just about replacing worn parts; it is about preserving the vehicle's original handling characteristics and safety. By choosing the right components, you ensure that vibrations are minimised and power transmission remains efficient for many thousands of kilometres to come. Our focus is on offering parts that meet the rigorous standards demanded of a car in this premium class. We ensure you get the right parts to maintain the comfort and performance your car delivered when brand new.

How the BMW 7 drivetrain is constructed

The drivetrain layout of a BMW 7 is an intricate affair that varies depending on generation and drive configuration. The basis in most models is a longitudinal engine sending power rearwards via a gearbox to a robust propeller shaft. For rear-wheel-drive models, that power is then distributed to the rear wheels via a differential and two drive shafts. On xDrive models, a transfer box is added that also directs power forwards to a front differential and front driveshafts. This sophisticated torque distribution requires high-precision components to function seamlessly.

Due to the car's long wheelbase, the prop shaft is often split into two sections, joined by a centre bearing designed to absorb vibrations and keep the shaft aligned. Every link in this chain, from the inner CV joint at the gearbox to the outer CV joint at the wheel hub, is precision-balanced. This sophisticated design is what provides the BMW 7 with its renowned high-speed stability, but it also means that the slightest imbalance in any component can propagate throughout the entire chassis. Understanding the interaction between the propeller shaft, centre bearing and drive shafts is essential for diagnosing and resolving faults correctly.

Common faults and symptoms

Despite the high build quality, the drivetrain in a BMW 7 is subjected to heavy loads, particularly in models with powerful engines. One of the most common symptoms of wear is vibration felt through the bodyshell or seat under acceleration, which can often be traced back to worn inner CV joints or issues with the propeller shaft centre bearing. If you hear a clicking noise at full steering lock when driving at low speeds, this is a classic sign of a failing outer constant velocity joint, frequently caused by a split CV boot that has allowed dirt and moisture to enter.

For BMW 7 owners, it is equally important to pay attention to noises from the prop shaft; a whining or humming noise can indicate that the centre bearing has worn out. Because these vehicles are so well insulated, subtle vibrations can be difficult to detect early on, but they should never be ignored as an imbalanced drivetrain can cause secondary damage to both the gearbox and the differential. Regular inspection of boots and bearings is inexpensive insurance against costly breakdowns down the line. Taking action at the first sign of an imbalance saves both time and money in the long run.

Common replacement parts for BMW 7

In our range for the BMW 7, you will find all the critical components required for a complete overhaul of the power transmission system. We currently stock several variants of drive shaft for BMW 7, covering a wide spectrum of engine options and model years. For anyone experiencing noises when cornering, we provide premium-quality outer CV joints for BMW 7. If vibrations instead occur under acceleration, an inner CV joint for BMW 7 could well be the solution to the issue.

We also stock 10 different types of propeller shaft for BMW 7, which represents a more extensive repair but is sometimes necessary in cases of severe imbalance or damage. Do not forget to inspect the centre bearing; we supply specific models of propeller shaft centre bearing for BMW 7 that are vital to correct prop shaft operation. By replacing these parts in good time, you preserve the luxurious driving feel that defines your car. Our catalogue is carefully selected to meet the technical specifications of your exact model, whether for the front or rear axle, ensuring your BMW stays in top condition.

How to find the right part for BMW 7

Proceed to the correct section for your BMW 7:

On a vehicle with several possible drivetrain faults, it is best practice to start directly in the appropriate category. By comparing the exact component sections for BMW 7, it becomes easier to distinguish between issues with the drive shaft, CV joint or propeller shaft and to continue to the page that best matches your symptoms and fitment.

Following these links takes you straight to the products relevant to your car's drivetrain. We have structured our inventory to help you find the correct technical specification quickly.

Why buy from CVJoint24

When you choose CVJoint24, you choose a Swedish driveline specialist dedicated to quality and precision. We know your BMW deserves the best, which is why we never compromise on product standards. With our fitment guarantee, you can be completely confident that the parts you order will fit your car accurately. We also provide fast dispatch across the EU, minimising your car's workshop downtime and getting you back on the road promptly.

Our comprehensive inventory and dedicated specialisation in drivetrains enable us to offer technical support and advice that general car parts stores often lack. We aim to supply the right part first time, every time, so you can return to driving with a car that performs like new. Shopping with us means acquiring not only a spare part, but also access to years of combined expertise in power transmission and vehicle dynamics. We are your partner for a trouble-free motoring experience in your BMW 7, focused on durability and technical excellence with every delivery.

Frequently asked questions about BMW 7

How do I know if my BMW 7 needs a new drive shaft?

Common symptoms include vibrations through the body during acceleration or clicking noises when cornering. If the vibrations are constant, an imbalanced propeller shaft may also be the cause.

Is there a difference between drive shafts for xDrive and rear-wheel drive?

Yes, xDrive models also feature front drive shafts and have a different rear drivetrain configuration. Always select your make, model and engine to find the correct version.

What causes vibrations in a BMW 7 at higher speeds?

This is frequently caused by wear in the propeller shaft centre bearing or play developing in an inner CV joint. A damaged prop shaft can also be responsible.

Can I replace just the CV joint instead of the entire drive shaft?

Yes, in many cases you can replace solely the outer or inner CV joint, providing a cost-effective way to repair the drivetrain.

How does the fitment guarantee work at CVJoint24?

When you select your car's make, model and engine, we match the parts directly to your vehicle's specifications. If a part unexpectedly does not fit, we will help you find the correct replacement.

How quickly are parts delivered for my BMW 7?

We offer fast delivery on most in-stock items, ensuring you can get your car repaired as quickly as possible.