BMW I3

Welcome to your specialist for BMW I3 drivetrain components. As a dedicated Swedish driveline specialist, we supply a hand-picked range of power-transmission parts tailored specifically...

Choose version

Choose a version to refine the results and get closer to the right product.

Products for BMW I3

20 products
1 - 20 of 20
Item no.:4110629
  • Position: Rear left
  • Splines gearbox side: 27
  • Splines wheel side: 31
  • Total length: 667 mm
  • Joint diameter: 86 mm
Item no.:5119518
  • Position: Rear right
  • Splines gearbox side: 27
  • Splines wheel side: 31
  • Total length: 780 mm
  • Joint diameter: 86 mm
Item no.:0588215
  • Position: Outer
  • Inner splines: 33
  • Seal diameter: 56 mm
  • Outer splines: 31
  • ABS teeth: 31
Item no.:646885
  • Position: Rear, Inner
  • Inner splines: 33
  • Splines gearbox side: 27
  • Seal diameter: 44 mm
  • Total length: 163 mm
Item no.:0941711
  • Inner diameter: 44 mm
  • Outer diameter: 67 mm
Item no.:4154993
  • Position: Rear left
  • Splines gearbox side: 27
  • Splines wheel side: 31
  • Total length: 667 mm
  • Joint diameter: 86 mm
Item no.:5176681
  • Position: Rear right
  • Splines gearbox side: 27
  • Splines wheel side: 31
  • Total length: 780 mm
  • Joint diameter: 86 mm
Item no.:0517818
  • Position: Outer
  • Inner splines: 33
  • Seal diameter: 56 mm
  • Outer splines: 31
  • ABS teeth: 31
Item no.:649275
  • Position: Rear, Inner
  • Inner splines: 33
  • Splines gearbox side: 27
  • Seal diameter: 44 mm
  • Total length: 163 mm
Item no.:0935308
  • Inner diameter: 44 mm
  • Outer diameter: 67 mm
Item no.:4111739
  • Position: Rear left
  • Splines gearbox side: 27
  • Splines wheel side: 31
  • Total length: 667 mm
  • Joint diameter: 86 mm
Item no.:5182015
  • Position: Rear right
  • Splines gearbox side: 27
  • Splines wheel side: 31
  • Total length: 780 mm
  • Joint diameter: 86 mm
Item no.:0525360
  • Position: Outer
  • Inner splines: 33
  • Seal diameter: 56 mm
  • Outer splines: 31
  • ABS teeth: 31
Item no.:649336
  • Position: Rear, Inner
  • Inner splines: 33
  • Splines gearbox side: 27
  • Seal diameter: 44 mm
  • Total length: 163 mm
Item no.:0959086
  • Inner diameter: 44 mm
  • Outer diameter: 67 mm
Item no.:4118902
  • Position: Rear left
  • Splines gearbox side: 27
  • Splines wheel side: 31
  • Total length: 667 mm
  • Joint diameter: 86 mm
Item no.:5182285
  • Position: Rear right
  • Splines gearbox side: 27
  • Splines wheel side: 31
  • Total length: 780 mm
  • Joint diameter: 86 mm
Item no.:0555433
  • Position: Outer
  • Inner splines: 33
  • Seal diameter: 56 mm
  • Outer splines: 31
  • ABS teeth: 31
Item no.:640299
  • Position: Rear, Inner
  • Inner splines: 33
  • Splines gearbox side: 27
  • Seal diameter: 44 mm
  • Total length: 163 mm
Item no.:0939397
  • Inner diameter: 44 mm
  • Outer diameter: 67 mm

Drivetrain for BMW I3

The BMW I3 represents a unique era in the automotive industry, featuring an innovative carbon-fibre construction and an electric drivetrain. As one of the first purpose-built electric cars on the market, it placed entirely new demands on how a drivetrain must be engineered and maintained. For owners of a BMW I3, it is vital to understand that power transmission in an electric car handles torque fundamentally differently from a conventional petrol or diesel vehicle. Instant torque means components like drive shafts and CV joints are subjected to maximum loads from the very first millisecond of acceleration. At CVJoint24, we specialise in precisely these engineering challenges. We offer an extensive range of parts developed specifically to withstand the distinct load profile of the BMW I3. By focusing on high-grade materials and precision manufacturing, we ensure your car retains its characteristic driving dynamics and efficiency for many years to come. As driveline specialists, we do not simply supply parts; we provide the peace of mind required when maintaining such a technologically advanced car.

How the BMW I3 drivetrain is engineered

The layout of the BMW I3 drivetrain is a masterpiece of automotive engineering, tailored for a rear-wheel-drive configuration where the electric motor and gearbox form a compact unit directly over the rear axle. This layout provides superb weight distribution, but also places stringent demands on the angles and working length of the drive shafts. Power travels from the electric motor through a single-speed reduction gearbox, which then distributes drive to the two driveshafts. Because the I3 has no multi-speed transmission, vehicle speed is controlled entirely by motor rpm, producing linear yet immense stresses on the constant velocity joints. The outer joints must accommodate suspension articulation and power delivery simultaneously, while the inner joints absorb the axial movement that occurs as the car travels over road imperfections. The entire assembly is optimised for low weight and minimal friction to maximise driving range. Using parts built to the exact factory specification is therefore essential to avoid compromising efficiency or cabin acoustics, as tolerances in this system are exceptionally fine.

Common faults and symptoms

Diagnosing drivetrain problems on an electric car like the BMW I3 demands a trained ear, as the whisper-quiet electric motor makes mechanical noises far more audible than in internal-combustion vehicles. One of the most typical symptoms of a worn outer CV joint on a BMW I3 is a clicking or knocking sound on full steering lock under acceleration. This is often caused by the joint balls pitting the raceways after extensive wear or lubrication failure. Another frequent symptom is vibration felt through the seat or chassis under hard acceleration, which typically points to play in the inner CV joints or an imbalance in a drive shaft. You should also check for grease or oil spatter on the inner wheel rims or garage floor, which is a telltale sign of a split CV boot. When a boot tears, the protective grease escapes rapidly while road dirt and moisture penetrate the assembly, causing accelerated wear and ultimately catastrophic joint failure. Catching these early signs saves significant repair costs and prevents roadside breakdowns.

Common replacement parts for BMW I3

When servicing or repairing the power transmission on your BMW I3, certain components naturally reach their replacement intervals sooner than others. In our catalogue you will find a broad selection of essential driveline parts. We stock multiple variations to cover the technical updates BMW introduced across the model's production run. Common replacement categories for this model include:

  • Drive shafts for BMW I3: We stock multiple options to ensure you get the exact length and spline count for your model year.
  • Outer CV joints for BMW I3: With several configurations available, we provide the exact joint required to restore smooth power delivery.
  • Propeller shafts for BMW I3: For specific configurations, we also supply prop shaft solutions built to original equipment standards.

Every component is balanced to eliminate unwanted vibrations, which is crucial in an electric vehicle where the slightest imbalance is immediately felt. Selecting the correct part is not just about physical fitment; the material properties must also withstand the heavy initial torque of an electric drivetrain. Replacing worn components with our quality-assured parts ensures your BMW I3 remains as reliable as the day it left the factory.

How to find the right part for your BMW I3

Go directly to the correct subcategory for your BMW I3:

On a vehicle where several drivetrain faults can share similar symptoms, starting in the right category saves valuable time. By comparing the exact component sections for the BMW I3, you can easily tell whether you require a drive shaft, a CV joint or a prop shaft, and proceed to the page that matches your car's symptoms and fitment.

Navigating spare parts can be daunting, particularly for a vehicle with such specialised engineering as the BMW I3. To ensure you get the exact match, cvjoint24.com allows you to filter parts accurately by selecting your car's make, model and engine variant. This precision filtering is crucial for the BMW I3, as key differences exist between the standard model and the I3s, as well as between pure electric and Range Extender (REX) versions. These variations can affect drive shaft dimensions, spline counts and joint designs. Our aim is to help you select the correct part first time, saving workshop downtime. We always recommend inspecting both left and right sides together, as driveline wear tends to be symmetrical. Rely on our specialist knowledge to ensure every part you fit meets or exceeds original specifications for safe, efficient motoring.

Why shop at CVJoint24?

Choosing CVJoint24 for your driveline parts means partnering with a specialist that has deep technical expertise and a genuine focus on vehicle dynamics. As the international shop of a Swedish driveline specialist, we focus exclusively on the drivetrain, giving our range greater depth and higher component quality than general motor factors. We understand your BMW I3 is an essential daily driver, which is why we prioritise prompt dispatch and precision order processing from our central warehouse in Helsingborg, Sweden. With our verified fitment compatibility, you can order with absolute confidence, knowing every component is selected to match your exact vehicle specification. Our dedicated focus on power transmission across European roads makes us the natural choice for your BMW. With CVJoint24, you receive high-grade parts, rapid dispatch across the EU, and the technical support required for a successful repair.

Frequently Asked Questions about Drivetrain for BMW I3

How do I know if my BMW I3 needs a new drive shaft?

Common symptoms include vibrations during acceleration or unusual noises from the rear axle. Because the I3 delivers high instant torque, these components wear out faster if the CV boots are split or damaged.

Is there a difference between the drive shafts for the BMW I3 and I3s?

Yes, there can be differences in dimensions and specifications between the standard model and the sportier I3s variant. Always filter by your exact make, model and engine version to ensure the correct fitment.

Why is there a clicking sound coming from the rear wheels of my I3?

A clicking noise under acceleration or when cornering typically indicates a worn outer CV joint. This is usually caused by dirt and road grime penetrating through a damaged CV boot.

Can I replace just the CV boot on my BMW I3?

Yes, provided you catch the damage early and the constant velocity joint remains clean, undamaged and well-greased, you can replace just the CV boot to extend the joint's working life.

How does a worn drivetrain affect my electric car's range?

Increased rolling resistance and mechanical friction from worn CV joints or unbalanced drive shafts raise energy consumption, which in turn reduces the vehicle's overall driving range.

How quickly can I receive spare parts for my BMW I3?

We offer fast delivery on stocked parts dispatched from our Swedish warehouse, helping you get your car repaired and back on the road without unnecessary delay.