BMW Z3 Roadster

Spare parts and drivetrain components for BMW Z3 Roadster.

Choose version

Choose a version to refine the results and get closer to the right product.

Products for BMW Z3 Roadster

74 products
25 - 48 of 74
Item no.:622283
  • Position: Rear
  • Total length: 1,256 mm
  • Outer diameter 1: 47 mm
  • Bolt circle diameter 1: 84 mm
  • Outer diameter 2: 14 mm
Item no.:614050
  • Position: Rear
  • Splines gearbox side: 37
  • Splines wheel side: 27
  • Total length: 585 mm
  • ABS teeth: 48
Item no.:6503963
  • Position: Outer
  • Inner splines: 24
  • Splines wheel side: 27
  • Outer diameter: 86 mm
  • ABS teeth: 48
Item no.:0414557
  • Position: Rear, Inner
  • Inner splines: 24
  • Outer diameter: 94 mm
Item no.:617480
  • Position: Rear
  • Splines wheel side: 27
  • Total length: 607 mm
  • ABS teeth: 48
Item no.:0934368
  • Inner diameter: 44 mm
  • Outer diameter: 67 mm
Item no.:696644
  • Position: Rear
Item no.:697480
  • Position: Rear
Item no.:694742
  • Position: Rear
Item no.:645271
  • Position: Rear, Inner
  • Inner splines: 24
  • Total length: 24 mm
Item no.:611354
  • Position: Rear
  • Splines wheel side: 27
  • Total length: 600 mm
  • Joint diameter: 94 mm
  • ABS teeth: 48
Item no.:0496614
  • Position: Rear, Inner
  • Inner splines: 25
  • Outer diameter: 100 mm
Item no.:0224480
  • Diameter: 25 mm
  • Bearing thickness: 29 mm
  • Hole spacing c/c: 160 mm
Item no.:6130833
  • Position: Rear
  • Splines wheel side: 27
  • Total length: 592 mm
  • Joint diameter: 86 mm
  • ABS teeth: 48
Item no.:621090
  • Position: Rear
  • Total length: 1,256 mm
  • Outer diameter 1: 47 mm
  • Bolt circle diameter 1: 84 mm
  • Outer diameter 2: 14 mm
Item no.:6588348
  • Position: Outer
  • Inner splines: 24
  • Splines wheel side: 27
  • Outer diameter: 86 mm
  • ABS teeth: 48
Item no.:0497009
  • Position: Rear, Inner
  • Inner splines: 24
  • Outer diameter: 94 mm
Item no.:0912781
  • Inner diameter: 44 mm
  • Outer diameter: 67 mm
Item no.:692161
  • Position: Rear
Item no.:691148
  • Position: Rear
Item no.:690216
  • Position: Rear
Item no.:644152
  • Position: Rear, Inner
  • Inner splines: 24
  • Total length: 24 mm
Showing 25–48 of 74 products

Drivetrain for BMW Z3 Roadster

The BMW Z3 Roadster is an iconic sports car where genuine driving engagement and direct mechanical feel take centre stage. Maintaining that razor-sharp steering, responsive acceleration and sporty character demands a drivetrain working in complete harmony. The drivetrain on a Z3 Roadster is the very heart of the car's performance, responsible for transmitting every ounce of engine power to the rear wheels without losses or unwanted noises. Here at CVJoint24, you will find the specific components required to service or completely rebuild your car's power delivery. Whether you own an early 1.8-litre model or a later six-cylinder variant, the right components are vital for dependable performance. We understand the importance of precision and build quality when sourcing parts for an enthusiast car like the BMW Z3 Roadster, and our range is meticulously selected to meet these rigorous standards.

How the BMW Z3 Roadster drivetrain is designed

The BMW Z3 Roadster is engineered around a traditional rear-wheel-drive layout deeply rooted in BMW's heritage. Power transfer starts at the engine and gearbox, where torque travels rearwards through a sturdy propeller shaft. This prop shaft is often split into two sections and supported by a centre bearing to minimise vibrations and flex under load. Reaching the rear axle, power enters the differential, which distributes torque out to the rear wheels via two independent drive shafts. This layout delivers the balanced weight distribution and rewarding driving dynamics that few modern cars can match. Because the Z3 Roadster shares certain chassis elements with the legendary E30 generation yet features its own unique track width and body, selecting parts tailored precisely to the Roadster model is critical. Every link in this chain, from the front universal joints to the outer CV joints, plays an essential part in your car's overall balance and refinement.

Common problems and symptoms

With age and high mileage, drivetrain parts on a BMW Z3 Roadster inevitably suffer from wear, which usually produces clear and concerning warning signs. One classic symptom of an issue with a driveshaft is a rhythmic clicking sound during tight turns at low speeds. If you instead notice vibrations shuddering through the seat or floorpan during acceleration, an inner constant velocity joint may be failing. Vibrations that appear at specific road speeds, frequently around 80–100 km/h, often indicate an unbalanced propeller shaft or a worn centre bearing. Regular inspections of your CV boots are equally vital; a small split allows lubricating grease to escape while letting road grit in, quickly ruining the CV joint. Acting promptly on these early warnings ensures comfortable motoring and prevents catastrophic failures or costly secondary damage to related mechanical parts.

Common replacement parts for BMW Z3 Roadster

For BMW Z3 Roadster owners, drive shafts and propeller shafts are the most frequent components requiring attention as age and distance accumulate. Our extensive range includes multiple drive shaft variants and prop shafts to suit the diverse selection of engines and gearboxes fitted across the model's production run. Alongside complete shafts, smaller yet crucial components such as ABS rings and CV boot kits often need renewing to maintain active safety systems and protect pricier hardware. By proactively replacing worn drivetrain parts, you ensure clean power delivery without unwanted play or noise. We always recommend inspecting the complete rear driveline during your annual service—especially on cars driven spiritedly on twisty roads, where driveline loads are substantial.

Finding the right parts for BMW Z3 Roadster

Select the relevant category for your BMW Z3 Roadster:

With multiple potential drivetrain faults on this model, starting in the right section saves valuable time. By comparing the specific sections for the BMW Z3 Roadster, you can easily distinguish between drive shaft, CV joint and propeller shaft issues and head straight to the page that matches your symptoms and vehicle specification.

Using these dedicated links takes you straight to detailed technical specifications and part descriptions matched to your BMW, making your purchase straightforward and dependable.

Why shop with CVJoint24

CVJoint24 is the international shop of a Swedish driveline specialist, supplying power transmission components from our central warehouse in Helsingborg, Sweden. Unlike general car parts retailers, we focus with unmatched technical depth on our specialist niche—a huge benefit when sourcing parts for an enthusiast model like the BMW Z3 Roadster. We know your roadster is more than just transport; it is a passion project and an investment that demands exact-fit, long-lasting spare parts. Our expertise means you receive knowledgeable technical support and a catalogue tailored to the needs of rear-wheel-drive sports cars. Simply filter by your make, model and engine variant, and our prompt EU-wide shipping ensures your parts arrive swiftly before your next drive. Choosing CVJoint24 means trusting a partner committed to product quality, customer care and extensive technical expertise.

Frequently Asked Questions about Drivetrain Parts for BMW Z3 Roadster - Spare Parts & Drive Shafts

How do I know if my BMW Z3 Roadster needs a new drive shaft?

The most common signs are clicking noises when cornering, vibrations under acceleration, or visible damage to the CV boots where grease has leaked out.

Do all propeller shafts fit every BMW Z3 model?

No, the propeller shaft varies depending on engine size and whether the car has a manual or automatic gearbox. Select your vehicle's make, model, and engine to find the right part.

What causes body vibrations in a Z3 Roadster?

Vibrations are often caused by an unbalanced propeller shaft, a worn centre bearing, or a failing inner CV joint.

Can I replace just the CV joint, or do I need to replace the complete drive shaft?

On many BMW models, it is most cost-effective and reliable to replace the complete drive shaft, although individual CV joints may be available in some cases.

How many drive shafts does a BMW Z3 Roadster have?

As the BMW Z3 Roadster is rear-wheel drive, it has two drive shafts, one on each side at the rear, transferring power from the differential to the wheels.

Why is it important to check the CV boots on my BMW?

The CV boot protects the CV joint from dirt and water. If it splits, the joint is quickly ruined, leading to far more expensive repairs.