Citroen C5 II Break

Spare parts and drivetrain components for Citroen C5 II Break.

Products for Citroen C5 II Break

41 products
25 - 41 of 41
Item no.:691209
  • Position: Rear
  • Inner diameter: 30 mm
  • Outer diameter: 50 mm
  • Height: 12 mm
Item no.:2111516
  • Position: Front right
  • Splines gearbox side: 37
  • Splines wheel side: 25
  • Total length: 915 mm
  • Joint diameter: 100 mm
Item no.:3516018
  • Position: Outer
  • Inner splines: 39
  • Seal diameter: 59 mm
  • Outer splines: 25
  • ABS teeth: 48
Item no.:0500902
  • Position: Front, Outer
  • Inner splines: 39
  • Seal diameter: 58 mm
  • Outer splines: 25
  • Thread size: M24X1,5
Item no.:0697205
  • Total length: 105 mm
Item no.:118938
  • Position: Front left
  • Splines gearbox side: 24
  • Splines wheel side: 25
  • Total length: 649 mm
  • Joint diameter: 90 mm
Item no.:2135133
  • Position: Front right
  • Splines gearbox side: 24
  • Splines wheel side: 25
  • Total length: 936 mm
  • Seal ring diameter: 59 mm
Item no.:350453
  • Position: Outer
  • Inner splines: 34
  • Seal diameter: 58 mm
  • Outer splines: 28
  • Thread size: M24X1,5
Item no.:0521633
  • Position: Outer
  • Inner splines: 26
  • Seal diameter: 58,8 mm
  • Outer splines: 25
  • Thread size: M24 x 1,5
Item no.:217916
  • Position: Front right
  • Splines gearbox side: 26
  • Splines wheel side: 25
  • Total length: 845 mm
  • Diameter 1: 90 mm
Item no.:119803
  • Position: Front left
  • Splines gearbox side: 26
  • Splines wheel side: 25
  • Total length: 633 mm
  • Diameter 1: 90 mm
Item no.:144452
  • Position: Front left, Inner
  • Inner splines: 34
  • Seal diameter: 30,2 mm
  • Total length: 150 mm
  • Outer splines: 26
Item no.:116861
  • Position: Front left
  • Splines gearbox side: 24
  • Splines wheel side: 28
  • Total length: 670 mm
  • Joint diameter: 86 mm
Item no.:217450
  • Position: Front right
  • Splines gearbox side: 24
  • Splines wheel side: 28
  • Total length: 958 mm
  • Joint diameter: 92 mm
Item no.:3574265
  • Position: Front, Outer
  • Inner splines: 39
  • Seal diameter: 58 mm
  • Outer splines: 28
  • ABS teeth: 48
Item no.:0672620
  • Outer diameter: 22 mm
  • Diameter: 89 mm
Item no.:0613498
  • Total length: 113 mm
Showing 25–41 of 41 products

Drivetrain for Citroen C5 II Break

The Citroen C5 II Break is an estate renowned for its exceptional comfort and advanced technical solutions, especially regarding suspension and power transmission. The drivetrain is central to the car's ability to travel smoothly and efficiently, and for a spacious estate like this, the demands on component durability are particularly high. To maintain its characteristic driving feel and ensure that engine torque reaches the road without loss, premium-quality components are essential. With us, you will find a dedicated range tailored specifically to this model, ensuring that every part works seamlessly with your car's mechanical systems. We focus on delivering parts built to withstand the demands of both city driving and long motorway journeys in a Citroen C5 II Break.

How the drivetrain is engineered on the Citroen C5 II Break

The drivetrain on a Citroen C5 II Break consists of several critical components working together to transfer power from the gearbox to the front wheels. The system is built around drive shafts fitted with both inner and outer CV joints. The outer joints are mounted close to the wheels, allowing them to turn while transmitting power, whereas the inner joints sit closer to the gearbox and absorb the angular changes caused by suspension travel. Because the C5 II Break often features Citroen's hydropneumatic suspension, the drive shafts are subjected to changing operating angles depending on ride height. This makes it vital that the constant velocity joints remain properly lubricated and that the CV boots stay intact to prevent premature wear on moving parts.

Common faults and symptoms

There are several clear signs that the drivetrain on your Citroen C5 II Break is wearing out and requires attention. One of the most typical symptoms is a rhythmic clicking or knocking noise from the front end when cornering under acceleration; this almost always points to a worn outer CV joint. If you instead notice vibrations through the steering wheel or chassis, particularly under heavy acceleration, this can indicate an unbalanced driveshaft or play in the inner joints. It is also essential to inspect the CV joint boots regularly. If a boot splits, grease escapes while dirt and moisture penetrate, quickly leading to joint failure. Catching these issues early can save you significant repair costs down the line.

Common parts to replace on the Citroen C5 II Break

Based on our extensive experience and data with French vehicles, two main categories are especially relevant for owners of this model. We have tailored our stock to match the requirements of the Citroen C5 II Break with high precision. At present, we offer the following primary categories for your car:

  • Drive shafts for Citroen C5 II Break – We stock several complete drive shaft variants covering most engine and gearbox configurations.
  • Outer CV joints for Citroen C5 II Break – We provide 4 specific outer joints for those carrying out a targeted repair.

Replacing an entire drive shaft is often the recommended approach, as it ensures both inner and outer joints are in pristine condition for long-term peace of mind. It also saves labour time compared to dismantling and rebuilding individual joints on an old shaft.

How to find the right part for your Citroen C5 II Break

Proceed to the relevant section for your Citroen C5 II Break:

On a vehicle with several possible driveline issues, it makes sense to navigate directly to the correct category. By comparing the exact sections for the Citroen C5 II Break, it becomes straightforward to distinguish between faults in a drive shaft, CV joint or propeller shaft, taking you straight to the page that matches your symptoms and fitment.

Selecting the right spare part for a technically sophisticated car like the Citroen C5 II Break can sometimes be challenging. The model was produced with various engine options and gearbox types, meaning drive shaft lengths, ABS ring tooth counts and spline specifications often differ. To make the process straightforward and reliable, you can filter our range by selecting your vehicle's make, model and engine. This narrows down the catalogue to parts suitable for your specific car. We always advise double-checking technical specifications if your car has had modifications, though our database is optimised for factory setups. Should you ever be unsure, our specialist team is on hand to guide you to the right driveline components.

Why buy from CVJoint24

CVJoint24 is the international shop of a Swedish driveline specialist, supplying drivetrain and power transmission components across the EU. Unlike general car parts retailers, we focus exclusively on driveline systems, giving us specialised technical expertise and deep product knowledge. When shopping with us, you receive parts selected for their durability and exact fit on your Citroen C5 II Break. We know how important it is to get your vehicle back on the road quickly, which is why we maintain high stock levels and dispatch swiftly across Europe from our warehouse in Helsingborg, Sweden. Our focus on quality means we only supply components we trust ourselves, giving you total confidence. With technical support, a dedicated range and an intuitive vehicle search, we are your reliable choice for all driveline components.

Frequently asked questions about drivetrain parts for Citroen C5 II Break

How do I know if my Citroen C5 II Break needs a new drive shaft?

The most common signs are vibrations under acceleration or a clicking noise when turning. If the vibrations can be felt throughout the car, it is often the inner joint or the shaft itself that has worn out.

Can I replace only the outer CV joint on my Citroen?

Yes, if the drive shaft itself is otherwise in good condition and shows no damage or imbalance, you can save money by simply replacing the outer CV joint.

Why are there so many different drive shafts for the C5 II Break?

Fitment varies depending on whether the car has a manual or automatic gearbox, as well as the engine size installed. Always select your make, model and engine to find the correct variant.

What is included in an outer CV joint kit?

Our outer CV joint kits for the Citroen C5 II Break typically include the joint itself, a vehicle-specific CV boot, high-quality grease, circlips and the necessary clamps.

Is it difficult to replace a drive shaft on a Citroen C5 II Break?

It requires some mechanical experience and the correct tools, especially as parts of the suspension must be dismantled. For vehicles fitted with hydropneumatic suspension, extra care must be taken during the procedure.

How often should I inspect the boots on my drivetrain?

We recommend a visual inspection at every service or tyre change. A split CV boot should be replaced immediately to prevent dirt from ruining the entire CV joint.