Citroen Xantia

Spare parts and drivetrain components for the Citroen Xantia.

Products for Citroen Xantia

53 products
49 - 53 of 53
Item no.:213827
  • Position: Front right
  • Splines gearbox side: 37
  • Splines wheel side: 25
  • Total length: 895 mm
  • ABS teeth: 48
Item no.:115003
  • Position: Front left
  • Splines gearbox side: 37
  • Splines wheel side: 25
  • Joint diameter: 100 mm
  • ABS teeth: 48
Item no.:0624259
  • Position: Front
Item no.:333009
  • ABS teeth: 48
  • Inner diameter: 90 mm
  • Outer diameter: 99 mm
  • Width: 10 mm
Item no.:0645496
  • Total length: 103 mm
  • Inner diameter: 24 mm
Showing 49–53 of 53 products

Drivetrain for Citroen Xantia

Maintaining the drivetrain on a Citroen Xantia is vital to preserve the car's characteristic comfort and reliability. The drivetrain is the system that transfers engine power to the wheels, and on a front-wheel-drive car like the Citroen Xantia, this involves a complex assembly of components constantly subjected to heavy stress. At CVJoint24, we specialise in these exact components to offer you, the owner, the best possible spare parts. With an extensive range for this model, we cover the most critical requirements to keep your car running smoothly on the road.

Our focus is on delivering parts that not only fit mechanically, but also match or exceed original equipment quality. For the Citroen Xantia, it is particularly crucial that drivetrain components can cope with substantial articulation, not least because of the vehicle's unique hydraulic suspension system, which places high demands on drive shaft and joint flexibility. By choosing the right parts from a specialist, you ensure that power transmission remains smooth and vibration-free for many miles to come.

How the drivetrain is engineered on the Citroen Xantia

The drivetrain on a Citroen Xantia is engineered with a transverse engine and front-wheel drive, an efficient layout that maximises interior space and delivers stable handling. Power travels from the gearbox via the drive shafts out to the front wheels. Each drive shaft is fitted with two joints: an inner joint at the gearbox and an outer CV joint at the wheel hub. The outer joint is particularly critical, as it must transmit power while the wheel steers and moves vertically relative to the body.

A unique aspect of the Citroen Xantia is how the drivetrain interacts with the hydropneumatic suspension. Because the vehicle's ride height and geometry can vary significantly more than on a conventionally sprung car, the CV joints operate across a wide spectrum of working angles. This demands premium lubrication and high-grade materials. In addition, the wheel hubs feature ABS rings integrated into the outer drivetrain components to provide the safety systems with accurate wheel-speed data. Understanding this design is key to diagnosing why certain parts wear out faster than others.

Common faults and symptoms

There are several clear signs that the drivetrain on your Citroen Xantia is beginning to fail. One of the most common symptoms of a worn outer CV joint on a Citroen Xantia is a rhythmic clicking or knocking noise when cornering on full lock at low speeds, such as during parking manoeuvres. This noise typically occurs when grease has escaped through a split CV boot, allowing dirt and moisture to enter and cause abrasive mechanical wear to the internal balls and bearing tracks.

Another common issue involves the braking and safety systems. If the ABS warning light illuminates on the dashboard, or if the ABS intervenes under gentle braking on dry tarmac, a defective ABS ring on the Citroen Xantia is often the culprit. Over time, these rings can corrode or crack due to rust developing on the CV joint beneath them. A cracked ring sends erratic pulses to the wheel-speed sensor, causing the system to register an apparent wheel lock-up. Furthermore, vibrations under acceleration can point to worn inner constant velocity joints, requiring prompt attention to avoid secondary damage to the gearbox.

Commonly replaced parts on the Citroen Xantia

Within the drivetrain category for the Citroen Xantia, two component groups account for the majority of replacements. We have carefully categorised our range to help you find the right part quickly:

  • Outer CV joints: We stock multiple variants of outer CV joints to suit the various engine options and model years of the Citroen Xantia.
  • ABS rings: With a broad selection of ABS rings in stock, we offer the correct tooth counts and diameters to keep your braking system operating faultlessly.

Alongside these primary parts, replacing the CV joint boots is also routine maintenance. A CV boot is inexpensive insurance; catching a split in the rubber early allows you to save the more expensive CV joint simply by fitting a new boot kit with fresh grease. On the Citroen Xantia, it is equally important to check that the ABS reluctor ring is firmly seated and undamaged by road salt or road debris, as corrosion here is one of the most frequent causes of MOT test failures relating to the braking system.

How to find the right part for your Citroen Xantia

Navigate directly to the relevant subcategory for your Citroen Xantia:

On a model with multiple potential drivetrain issues, it pays to start in the right category from the outset. By navigating the exact component sections for the Citroen Xantia, it is straightforward to distinguish between faults in a drive shaft, CV joint or propeller shaft, and proceed to the page that matches your symptoms and fitment needs.

Selecting the correct spare parts for a Citroen Xantia can occasionally be tricky, as specifications vary depending on engine size, gearbox type, and whether the car is equipped with ABS. The most reliable way to ensure an exact fit is to select your vehicle's make, model and engine variant in our store selector. This filters our catalogue down to the components engineered specifically for your car, preventing misorders and ensuring precise technical compatibility.

When looking for an outer CV joint for a Citroen Xantia, remember that the spline count on the shaft and inside the hub can vary between models. The seal diameter may also differ. For a Citroen Xantia ABS ring, the tooth count and internal diameter are the critical dimensions. If you are unsure which component you require, we recommend counting the splines or teeth on your original part and measuring its diameter before ordering, ensuring complete peace of mind.

Why shop with CVJoint24?

CVJoint24 is your dedicated partner for all power transmission components. As an international shop backed by a Swedish driveline specialist, we offer an in-depth level of technical expertise that general car-parts suppliers simply cannot match. We focus exclusively on drivetrain parts, allowing us to maintain remarkable depth in our range for classic moderns like the Citroen Xantia. Our aim is to supply the right part at the right price, supported by our comprehensive fitment knowledge and strict quality standards.

When you purchase from us, you receive high-quality parts engineered to withstand demanding European road conditions and harsh winter climates. We understand the importance of rapid dispatch across the EU and accurate vehicle data, which is why we continually invest in our technical catalogue and customer support. With a tailored range for the Citroen Xantia, we are always ready to help you restore your car's suspension and driveline to peak condition, whether you need an individual ABS ring or a complete CV joint kit.

Frequently Asked Questions about Drivetrain for Citroen Xantia – High-Quality Spare Parts

How do I know if the outer CV joint is failing on my Citroen Xantia?

The most common symptom is a clicking or knocking noise when taking sharp corners while driving. If the noise disappears when driving straight ahead, it is almost certainly a worn outer CV joint.

Why is the ABS warning light illuminated on my Citroen Xantia?

This is often caused by a cracked or corroded ABS ring on one of the CV joints. A damaged reluctor ring sends incorrect signals to the sensor, causing the system to log a fault code and trigger the warning light.

Can I replace just the ABS ring, or do I need to replace the entire CV joint?

On the Citroen Xantia, you can often replace just the ABS ring if the CV joint itself is still in good condition. We stock 10 different ABS rings to cover most requirements.

Do all CV joints fit every Citroen Xantia model?

No, there are variations depending on the engine (e.g. 1.8, 2.0 or diesel) and gearbox. Always select your car's make, model and engine to find the exact replacement among our 13 outer CV joints.

What happens if I drive with a split CV boot?

If the boot is torn, grease leaks out and dirt gets in. This causes the CV joint to wear out very rapidly, which can result in total failure and leave the car unable to drive forward.

How many splines does a CV joint have on a Citroen Xantia?

The spline count varies between different versions of the Xantia. For example, 25 or 28 splines on the outer section are common, but it is essential to verify against your car's specific chassis number and engine details.