Dodge Caliber

Spare parts and drivetrain components for Dodge Caliber.

Products for Dodge Caliber

25 products
1 - 24 of 25
Item no.:1177029
  • Position: Front left
  • Splines gearbox side: 28
  • Splines wheel side: 27
  • Total length: 637 mm
Item no.:0634520
  • Outer diameter: 22 mm
  • Diameter: 78 mm
Item no.:2178653
  • Position: Front right
  • Splines gearbox side: 28
  • Splines wheel side: 28
  • Total length: 585 mm
Item no.:2177176
  • Position: Front right
  • Splines gearbox side: 27
  • Splines wheel side: 28
  • Total length: 958 mm
Item no.:1185055
  • Position: Front left
  • Splines gearbox side: 24
  • Splines wheel side: 28
  • Total length: 625 mm
  • Joint diameter: 91 mm
Item no.:2154765
  • Position: Front right
  • Splines gearbox side: 28
  • Splines wheel side: 28
  • Total length: 615 mm
  • Joint diameter: 91 mm
Item no.:354602
  • Position: Outer
  • Inner splines: 36
  • Splines wheel side: 28
  • Seal diameter: 59,5 mm
  • Outer diameter: 86 mm
Item no.:352066
  • Position: Outer
  • Inner splines: 33
  • Seal diameter: 59,5 mm
  • Outer splines: 28
  • Thread size: M22X1,5
Item no.:0221896
  • Total length: 56 mm
  • Diameter: 22 mm
Item no.:0615898
Item no.:0616374
  • Total length: 110 mm
Item no.:0989166
  • Inner diameter: 50 mm
  • Outer diameter: 70 mm
Item no.:0920380
  • Inner diameter: 35 mm
  • Outer diameter: 56 mm
Item no.:0980085
  • Inner diameter: 43 mm
  • Outer diameter: 58 mm
Item no.:694546
  • Position: Rear
Item no.:112686
  • Position: Front left
  • Splines gearbox side: 27
  • Splines wheel side: 28
  • Total length: 619 mm
  • Joint diameter: 83 mm
Item no.:0519411
  • Position: Front, Outer
  • Inner splines: 36
  • Seal diameter: 59,5 mm
  • Outer splines: 28
  • Thread size: M22X1,5
Item no.:0517988
  • Position: Outer
  • Inner splines: 33
  • Splines wheel side: 28
  • Outer diameter: 84 mm
Item no.:2129180
  • Position: Front right
  • Splines gearbox side: 24
  • Splines wheel side: 28
  • Total length: 980 mm
  • Diameter 1: 83 mm
Item no.:211383
  • Position: Front right
  • Splines gearbox side: 24
  • Splines wheel side: 28
  • Total length: 978 mm
  • Joint diameter: 91 mm
Item no.:623305
  • Total length: 2,023 mm
  • Number of joints: 3
  • Outer diameter 1: 46 mm
  • Bolt circle diameter 1: 77,8 mm
  • Outer diameter 2: 42,7 mm
Item no.:629357
  • Position: Rear
  • Total length: 1,612 mm
Showing 1–24 of 25 products

Drivetrain for Dodge Caliber

The Dodge Caliber is a distinctive model that combines characteristics of both a hatchback and an SUV, placing specific demands on its mechanical components. The drivetrain is the critical chain of parts that transfers engine power to the road, and for a car like the Caliber, it is essential that these parts work in perfect harmony. As a Swedish driveline specialist, we offer an extensive range of spare parts carefully selected to fit this specific model. By focusing on high product relevance and technical precision, we ensure that your car maintains its performance and safety for many kilometres to come. Whether you drive a petrol or diesel variant, the right power transmission is the key to a stable driving experience and a long vehicle service life.

How the drivetrain is configured on the Dodge Caliber

Power transmission in a Dodge Caliber is fundamentally based on a front-wheel-drive layout with a transversely mounted engine in the bay. From the gearbox, which can be either manual or of CVT type, two drive shafts extend to connect to the front wheel hubs. Each shaft is fitted with two joints: an inner joint that accommodates axial movement as the suspension works, and an outer joint that allows for steering. These components work under constant pressure and high rotational speeds, making them vital parts of the car drivetrain. The system also includes ABS rings integrated on the outer joints to deliver accurate signals to the vehicle's safety systems. Understanding this layout is the first step towards identifying wear before it leads to a complete breakdown on the road.

Common faults and symptoms

There are several clear signs that the drivetrain in your Dodge Caliber is starting to fail. One of the classic symptoms is a clicking or knocking noise clearly heard when making sharp turns at low speed, which is almost exclusively caused by a worn outer CV joint. If you instead experience vibrations that shake the entire car under acceleration, the issue is often located in the inner joint or in an imbalance in the driveshaft itself. It is also essential to inspect the boots regularly; a split boot allows grease to escape and road dirt to enter, acting as an abrasive paste that ruins the joint in very short order. Ignoring these warning signs can cause the shaft to snap, resulting in a total loss of drive.

Common parts to replace on the Dodge Caliber

When it comes to repairs, complete solutions are often the most cost-effective approach rather than replacing individual small parts. For this model, our selection of drive shafts for Dodge Caliber is particularly important, and we stock several specific items covering the most common requirements across different engine options. Replacing an entire drive shaft rather than attempting to rebuild an old joint not only saves assembly time, but also provides the peace of mind that all constituent parts, including CV boots and clips, are factory-fresh and balanced. It is also common to need new ABS rings if they have cracked due to corrosion, which frequently triggers warning lights on the dashboard. By choosing the right car parts, you ensure that your Dodge remains dependable.

How to find the right part for Dodge Caliber

Browse directly to the relevant section for your Dodge Caliber:

On a model with multiple possible drivetrain issues, it is sensible to start in the right category right away. By comparing the exact subcategories for Dodge Caliber, it becomes easier to distinguish between faults in the drive shaft, CV joint or propeller shaft, and to proceed to the page that best matches your symptoms and fitment.

By selecting the right category, you can immediately check availability and technical specifications for each product, minimising the risk of incorrect purchases and unwanted returns. We always recommend checking that the specifications match the component fitted to your car.

Why shop at cvjoint24.com

CVJoint24 is not just an online shop; we are a Swedish specialist with a dedicated focus on drivetrain components. Our strength lies in our category expertise and our commitment to offering parts with a perfect fit for your Dodge Caliber. We understand European roads and the specific demands that different climates place on vehicle mechanics. When you shop with us, you gain access to a drivetrain specialist that prioritises quality and technical support above all else. With our straightforward search by make, model and engine, alongside our dedicated inventory, you can be confident of receiving the correct parts delivered quickly and efficiently. We strive to be the natural choice for anyone in need of reliable driveline components for their car.

Frequently Asked Questions about Drivetrain for Dodge Caliber – Power Transmission Spare Parts

Which drivetrain parts are most commonly replaced on a Dodge Caliber?

The most common parts that need replacing are drive shafts and CV joints, as well as the CV boots that protect these components from dirt and moisture.

How do I know if the drive shaft on my Dodge Caliber is failing?

Common symptoms include clicking noises when turning (outer CV joint) or vibrations through the car during acceleration (inner CV joint or an unbalanced shaft).

How do I find the right part for my Dodge Caliber?

Selecting your Dodge Caliber's exact model, year and engine variant in our vehicle filter is the most reliable way to find the drive shafts and components that fit your car.

Why does my Dodge Caliber vibrate under acceleration?

Vibrations during acceleration are often caused by wear in the inner CV joint or a bent drive shaft, which introduces imbalance into the drivetrain.

Is it difficult to replace a drive shaft on a Dodge Caliber?

It requires some mechanical experience and the correct tools. For many DIY mechanics, replacing the complete drive shaft is more time-effective than replacing an individual joint.

How many drive shafts for Dodge Caliber do you have in your range?

We currently offer 6 specific drive shaft products for the Dodge Caliber, tailored to different engine options and gearboxes.