Drive shafts for Audi A3 3.2 V6 Quattro

Looking for a replacement drive shaft for your Audi A3 3.2 V6 Quattro? As the international shop of a Swedish driveline specialist, we supply a carefully chosen selection of drive shafts...

Products for Drive shafts for Audi A3 3.2 V6 Quattro

11 products
1 - 11 of 11
Item no.:2128539
  • Position: Front right
  • Splines wheel side: 36
  • Total length: 586 mm
  • Joint diameter: 98 mm
  • Joint diameter, gearbox side: 123 mm
Item no.:1179135
  • Position: Front left
  • Splines wheel side: 36
  • Total length: 495 mm
  • Joint diameter: 98 mm
  • Joint diameter, gearbox side: 108 mm
Item no.:2176590
  • Position: Front right
  • Splines gearbox side: 23
  • Splines wheel side: 36
  • Total length: 800 mm
  • Joint diameter: 98 mm
Item no.:2117887
  • Position: Front right
  • Splines wheel side: 36
  • Total length: 600 mm
  • Joint diameter: 98 mm
  • Joint diameter, gearbox side: 108 mm
Item no.:4144546
  • Position: Rear left
  • Splines wheel side: 36
  • Total length: 594 mm
  • Diameter 2: 100 mm
  • Flange diameter: 100 mm
Item no.:5104060
  • Position: Rear right
  • Splines wheel side: 36
  • Total length: 631 mm
  • Diameter 2: 100 mm
  • Flange diameter: 100 mm
Item no.:1131650
  • Position: Front left
  • Splines wheel side: 36
  • Total length: 470 mm
  • Joint diameter: 98 mm
  • Joint diameter, gearbox side: 119 mm
Item no.:210859
  • Position: Front right
  • Splines wheel side: 36
  • Total length: 795 mm
  • Joint diameter: 98 mm
  • Joint diameter, gearbox side: 108 mm
Item no.:1197547
  • Position: Front left
  • Splines wheel side: 36
  • Total length: 480 mm
  • Joint diameter: 110 mm
  • ABS teeth: 28
Item no.:319936
  • Position: Front
  • Splines wheel side: 36
  • Total length: 488 mm
  • Joint diameter: 100 mm
  • Joint diameter, gearbox side: 108 mm
Item no.:2183372
  • Position: Front right
  • Splines wheel side: 36
  • Joint diameter: 100 mm
  • Joint diameter, gearbox side: 108 mm

Drive shafts for Audi A3 3.2 V6 Quattro

The Audi A3 3.2 V6 Quattro is a car that demands top-quality components to cope with its potent engine and advanced four-wheel-drive system. The drive shaft is a vital link in this chain, tasked with transferring torque from the gearbox and differentials out to the wheels. On a car equipped with the Quattro system, drive shafts are subjected to heavy stresses, particularly during spirited driving or in harsh weather conditions. We specialise in these precise drivetrain parts to ensure your car retains its driving pleasure and safety. Our range includes 13 carefully selected drive shafts that meet or exceed original equipment specifications, giving you a durable, long-term replacement solution.

What does a drive shaft do on the Audi A3 3.2 V6 Quattro?

The primary job of the drive shaft on an Audi A3 3.2 V6 Quattro is to transfer mechanical power from the engine, via the gearbox, to the wheels. Because this model features all-wheel drive, it has drive shafts at both the front and the rear. The front drive shafts must also accommodate steering angles, which places exceptionally high demands on the outer CV joints. A drive shaft consists of a shaft bar with an inner and an outer CV joint that allow for suspension travel and steering while maintaining continuous power delivery. Without functioning driveshafts, the output from the six-cylinder engine would never reach the road, making them one of the most critical elements in your vehicle's drivetrain.

Common signs of wear

Several distinct symptoms indicate that a drive shaft on your Audi A3 3.2 V6 Quattro is deteriorating. One of the most frequent signs is a knocking or clicking noise when taking sharp corners, which typically points to a worn outer constant velocity joint. If you instead notice vibrations throughout the car under acceleration, the inner CV joint is often the culprit. It is also essential to inspect the CV boots regularly; if a boot splits, grease escapes and road dirt gets in, rapidly destroying the joint and the entire shaft assembly. Ignoring these early warnings can result in total failure and leave you stranded, so prompt inspection is vital to avoid more expensive repairs.

How to choose the correct drive shaft

Selecting the right drive shaft for an Audi A3 3.2 V6 Quattro can be tricky, as technical specifications vary depending on transmission type (manual or DSG) and the model year. The most reliable step is to select your car's make, model and engine in our vehicle picker. This narrows down the catalogue to the exact parts engineered for your specific vehicle setup. Always verify whether you need to replace the left or right side, and whether the shaft is intended for the front or rear axle. Choosing a complete drive shaft from us gives you a fully assembled unit complete with joints and boots, which makes installation considerably simpler than rebuilding individual parts. Our expertise ensures you receive the correct length and spline count first time.

Related parts to inspect

You can also check these exact pages for the same car when working on the drive shaft:

When one drivetrain component exhibits wear, adjacent parts on the same car often require attention as well. Comparing these exact pages for the Audi A3 3.2 V6 Quattro makes it much easier to confirm whether the issue lies with the drive shaft itself or another related section of the drivetrain.

This is particularly relevant on models where vibrations, play and noises can transfer between multiple components along the driveline. A quick check of related categories reduces the risk of replacing the right type of part while overlooking a neighbouring component that contributes to the very same fault.

Why buy from CVJoint24?

CVJoint24 is your dedicated partner for specialist driveline parts. We understand the technical details of the Audi A3 3.2 V6 Quattro and only offer products manufactured to the highest standards. By focusing on a deep catalogue within drivetrain components, we deliver technical guidance that general car parts retailers rarely provide. As the international shop of a Swedish driveline specialist shipping across the EU, we make finding the right part straightforward when you select your specific model and engine. With fast dispatch and customer support that genuinely understands drive shafts, we help you get your car back on the road without hassle. Our aim is to supply the right part every time at competitive prices, so you can maintain your Audi with complete confidence.

Frequently asked questions about drive shafts for Audi A3 3.2 V6 Quattro

How do I know if my Audi A3 3.2 V6 Quattro needs a new drive shaft?

The most common signs are clicking noises when cornering, vibrations during acceleration, or visible grease leaks from torn CV boots on the drive shaft.

Is there a difference between drive shafts for manual and DSG gearboxes on the 3.2 V6?

Yes, there can be differences in length and mounting flanges. Always select your specific make, model and engine variant to ensure you receive the correct version for your gearbox.

Are CV joints included when I buy a complete drive shaft?

Yes, our complete drive shafts are supplied fully assembled with both inner and outer CV joints as well as CV boots, ready for direct installation.

Can I replace just the outer CV joint instead of the entire shaft?

Yes, provided the shaft bar itself is undamaged, you can replace only the outer CV joint, which is often a more economical solution if the wear is isolated.

How many drive shafts does an Audi A3 3.2 V6 Quattro have?

Because it is a four-wheel-drive vehicle, it has four drive shafts in total: two at the front and two at the rear, each transmitting power to its respective wheel.

What does the fitment guarantee at CVJoint24 mean?

It means that when you select your vehicle's make, model and engine, or check the details with us, we guarantee the part will fit your car; if not, we will help you find the correct component at no extra cost.