Drive shafts for Audi A4 Avant

Find the right drive shaft for your Audi A4 Avant, whether your car is front-wheel drive or equipped with Quattro all-wheel drive. Our range covers a wide selection of engine options...

Choose version

Choose a version to refine the results and get closer to the right product.

Products for Drive shafts for Audi A4 Avant

625 products
505 - 528 of 625
Item no.:2126672
  • Position: Front right
  • Total length: 613 mm
  • Splines wheel side: 38
  • ABS teeth: 45
Item no.:3129457
  • Position: Front left, Front right
  • Total length: 465 mm
  • Splines wheel side: 42
Item no.:1142908
  • Position: Front left
  • Flange diameter: 123 mm
  • Total length: 595 mm
  • Splines wheel side: 38
  • ABS teeth: 45
Item no.:2195335
  • Position: Front right
  • Flange diameter: 123 mm
  • Total length: 620 mm
  • Splines wheel side: 38
  • ABS teeth: 45
Item no.:311137
  • Position: Front left, Front right
  • Total length: 525 mm
  • Splines wheel side: 38
Item no.:313874
  • Total length: 625 mm
  • Splines wheel side: 38
Item no.:113829
  • Position: Front left
  • Total length: 600 mm
  • Splines wheel side: 38
Item no.:2116696
  • Position: Front right
  • Total length: 613 mm
  • Splines wheel side: 38
  • ABS teeth: 45
Item no.:3182873
  • Position: Front left, Front right
  • Flange diameter: 123 mm
  • Total length: 469 mm
  • Splines wheel side: 42
Item no.:113881
  • Position: Front left
  • Flange diameter: 124 mm
  • Total length: 595 mm
  • Splines wheel side: 38
Item no.:211936
  • Position: Front right
  • Flange diameter: 124 mm
  • Total length: 615 mm
  • Splines wheel side: 38
Item no.:312586
  • Position: Front left, Front right
  • Total length: 525 mm
  • Splines wheel side: 38
Item no.:312687
  • Total length: 625 mm
  • Splines wheel side: 38
Item no.:119630
  • Position: Front left
  • Total length: 600 mm
  • Splines wheel side: 38
Item no.:3155757
  • Position: Front left, Front right
  • Flange diameter: 123 mm
  • Total length: 458 mm
  • Splines wheel side: 42
Item no.:1166639
  • Position: Front left
  • Flange diameter: 123 mm
  • Total length: 595 mm
  • Splines wheel side: 38
  • ABS teeth: 45
Item no.:2153173
  • Position: Front right
  • Flange diameter: 123 mm
  • Total length: 620 mm
  • Splines wheel side: 38
  • ABS teeth: 45
Item no.:315381
  • Position: Front left, Front right
  • Total length: 525 mm
  • Splines wheel side: 38
Item no.:317884
  • Total length: 625 mm
  • Splines wheel side: 38
Item no.:112836
  • Position: Front left
  • Total length: 600 mm
  • Splines wheel side: 38
Item no.:3101025
  • Position: Front left, Front right
  • Total length: 465 mm
  • Splines wheel side: 42
Item no.:111755
  • Position: Front left
  • Flange diameter: 124 mm
  • Total length: 595 mm
  • Splines wheel side: 38
Item no.:216489
  • Position: Front right
  • Flange diameter: 124 mm
  • Total length: 615 mm
  • Splines wheel side: 38
Item no.:312359
  • Position: Front left, Front right
  • Flange diameter: 123 mm
  • Joint diameter: 123 mm
  • Total length: 544 mm
  • ABS teeth: 45
Showing 505–528 of 625 products

Drive shafts for Audi A4 Avant

The Audi A4 Avant is one of the most popular estate models on European roads, renowned for its balance of comfort and performance. The drive shaft is a vital component in the car's drivetrain, ensuring engine torque is transferred efficiently to the wheels. Here at CVJoint24, you will find a specialist range tailored specifically for this model. As the Audi A4 Avant has been manufactured across multiple generations with an extensive variety of engine options and drivetrains—from fuel-efficient diesels to powerful petrol engines and Quattro systems—it is essential to select a component precisely matched to your car's chassis number and technical specifications. Our catalogue covers everything from complete drive shafts to specific components, making us the obvious choice for both car owners and garages looking for quality and precision. Driving an Avant often means taking advantage of the car's estate carrying capacity, placing higher demands on the drive shafts to cope with the increased load without compromising safety.

What does a drive shaft do on an Audi A4 Avant?

The drive shaft on an Audi A4 Avant is responsible for transmitting rotational energy from the gearbox or differential out to the wheel hubs. Front-wheel drive A4 Avant models feature two front drive shafts, whereas Quattro models also feature rear drive shafts to provide all-wheel drive. The design consists of a shaft bar fitted with joints at each end. Known as CV joints (constant velocity joints), they allow the shaft to rotate at a constant speed even as the wheels steer or move up and down over road imperfections. On an Audi A4 Avant, which is frequently used for motorway cruising and carrying heavy boot loads, these components face substantial stress. A properly functioning drive shaft is crucial for minimising power loss and ensuring the electronic stability and traction control systems operate correctly, as these systems rely on a stable mechanical connection. The materials used in our driveshafts are chosen to resist corrosion and mechanical wear, which is especially important in harsh European winters where road salt can otherwise accelerate deterioration of the metal and CV boots.

Common signs of wear

There are several clear warning signs that indicate a drive shaft on your Audi A4 Avant is becoming worn or failing. One of the most typical symptoms is a clicking or knocking sound on full steering lock at low speeds, which usually points to a worn outer CV joint. If you instead experience vibrations through the steering wheel or the entire chassis under acceleration, it may signal that an inner CV joint has developed play or that the shaft itself is out of balance. It is also essential to inspect the CV boots regularly; if a boot splits, the lubricating grease leaks out while dirt gets in, rapidly destroying the joint. For Quattro owners, vibrations originating from underneath the centre of the car can also point to issues with a propeller shaft, detracting from the entire driving experience. Ignoring these warnings can lead to total driveline failure and sudden loss of drive, which is costly and dangerous at speed.

How to choose the correct drive shaft

Selecting the correct drive shaft for an Audi A4 Avant can be complex due to the numerous technical differences across model years and trim specifications. Factors such as gearbox type (manual, Tiptronic or Multitronic), engine torque and whether the car is front-wheel drive or Quattro determine the required shaft length and spline count. To make selection straightforward, our catalogue allows you to filter easily by your car's make, model and engine. This instantly brings up parts that are compatible with your specific car. We always advise checking whether there are specific requirements for ABS rings, or whether the driveshaft comes complete with fitting hardware such as bolts and grease. By buying from a specialist, you ensure a precise fit, saving time and money during installation. It is also worth noting that some models use different drive shafts depending on whether they have a sports chassis or standard suspension, as ground clearance directly alters operating angles.

Related parts to inspect

Please also check these exact pages for the same vehicle when working on the drive shaft:

When one drivetrain component shows signs of wear, related parts on the car should also be inspected. By comparing these exact pages for the Audi A4 Avant, it is easier to determine whether the issue lies with the drive shaft itself or another neighbouring part of the transmission.

This is especially important on models where vibrations, play and unusual noises can travel across multiple components in the drivetrain. A quick check of related categories reduces the risk of replacing the right type of part while overlooking an adjacent component that causes the same symptom.

By carrying out a comprehensive driveline inspection on your Audi A4 Avant, you secure a lasting repair that maintains your car's road safety and driving pleasure.

Why buy from CVJoint24?

CVJoint24 is the international shop of a Swedish driveline specialist, sending parts across Europe directly from our warehouse in Helsingborg, Sweden. We set ourselves apart from general motor factors with our in-depth niche knowledge and an inventory tailored specifically to driveline and transmission components. With our extensive range for the Audi A4 Avant, we supply reliable solutions for almost every variation of this model, whether an older workhorse or a newer generation. Our focus is delivering parts with guaranteed fitment, which we make straightforward by letting you filter accurately by make, model and engine. We understand how critical it is to get the right part first time to minimise vehicle downtime. Choosing us means gaining access to expert advice to guide you through technical specifications with confidence. We take pride in being the preferred partner for Audi drivers who demand proven quality, durability and dependable customer service.

Frequently Asked Questions about Drive Shafts for Audi A4 Avant

How do I know if the drive shaft fits my Audi A4 Avant?

The simplest and most reliable way is to select your vehicle by make, model, and engine variant in our store. This filters the 279 products that are technically verified for your specific car model.

What is the difference between an inner and outer CV joint?

The outer joint sits at the wheel hub and typically produces clicking noises when cornering when worn. The inner joint sits at the gearbox and usually causes vibrations under acceleration when it develops play.

Do I need to replace both drive shafts at the same time on my Audi?

No, this is not mandatory, but we recommend inspecting both sides thoroughly. If a CV boot is split on one side, there is a strong chance that the boot on the other side is also becoming brittle.

Does the same drive shaft fit both manual and automatic gearboxes?

Usually not. The overall length of the shaft and the connections to the gearbox often differ between manual gearboxes and automatics such as Tiptronic or Multitronic.

Are the CV boot and grease included when I buy a complete drive shaft?

Yes, our complete drive shafts are supplied fully assembled with CV boots, grease, and in most cases the necessary mounting bolts for a smooth installation.

How does the Quattro system affect the choice of drive shaft?

Quattro models feature unique driveshafts both front and rear. The rear drive shafts are specific to the four-wheel-drive system and differ noticeably from the front shafts in both length and design.

Can a faulty drive shaft damage other components on my Audi A4 Avant?

Yes, severe vibrations from a worn inner joint can over time damage the gearbox seals and bearings, which can result in considerably more expensive repairs.