Drive shafts for Audi A4 2.0 TDI

Need a new drive shaft for your Audi A4 2.0 TDI? As Swedish driveline specialists shipping across the EU, we offer an extensive range of high-quality drive shafts tailored specifically...

Products for Drive shafts for Audi A4 2.0 TDI

20 products
1 - 20 of 20
Item no.:3179618
  • Position: Front left, Front right
  • Total length: 465 mm
  • Splines wheel side: 42
Item no.:1190408
  • Position: Front left
  • Flange diameter: 123 mm
  • Total length: 595 mm
  • Splines wheel side: 38
  • ABS teeth: 45
Item no.:2159552
  • Position: Front right
  • Flange diameter: 123 mm
  • Total length: 620 mm
  • Splines wheel side: 38
  • ABS teeth: 45
Item no.:3132444
  • Position: Front left, Front right
  • Flange diameter: 123 mm
  • Total length: 521 mm
  • Splines wheel side: 38
  • ABS teeth: 45
Item no.:1187326
  • Position: Front left
  • Flange diameter: 123 mm
  • Total length: 580 mm
  • Splines wheel side: 38
  • ABS teeth: 45
Item no.:115115
  • Total length: 600 mm
  • Splines wheel side: 38
Item no.:318043
  • Position: Front left, Front right
  • Flange diameter: 123 mm
  • Joint diameter: 123 mm
  • Total length: 544 mm
  • ABS teeth: 45
Item no.:1169895
  • Position: Front left
  • Flange diameter: 130 mm
  • Total length: 611 mm
  • Splines wheel side: 38
  • ABS teeth: 45
Item no.:2113597
  • Position: Front right
  • Flange diameter: 130 mm
  • Total length: 638 mm
  • Splines wheel side: 38
  • ABS teeth: 45
Item no.:318690
  • Total length: 625 mm
  • Splines wheel side: 38
Item no.:3196476
  • Position: Front left, Front right
  • Flange diameter: 123 mm
  • Total length: 466 mm
  • Splines wheel side: 42
Item no.:111096
  • Flange diameter: 124 mm
  • Total length: 595 mm
  • Splines wheel side: 38
Item no.:211638
  • Flange diameter: 124 mm
  • Total length: 615 mm
  • Splines wheel side: 38
Item no.:116020
  • Position: Front left
Item no.:319576
  • Total length: 525 mm
  • Splines wheel side: 38
Item no.:1102917
  • Position: Front left
  • Flange diameter: 130 mm
  • Total length: 602 mm
  • Splines wheel side: 38
  • ABS teeth: 45
Item no.:3107886
  • Position: Front left, Front right
  • Flange diameter: 123 mm
  • Total length: 458 mm
  • Splines wheel side: 42
Item no.:3160526
  • Position: Front left, Front right
  • Flange diameter: 123 mm
  • Total length: 458 mm
  • Splines wheel side: 42
Item no.:3154833
  • Position: Front left, Front right
  • Flange diameter: 123 mm
  • Total length: 458 mm
  • Splines wheel side: 42
Item no.:312554
  • Flange diameter: 123 mm
  • Total length: 465 mm
  • Splines wheel side: 42

Drive shafts for Audi A4 2.0 TDI

Finding the right drive shaft for an Audi A4 2.0 TDI requires care, as this popular model variant exists in several technical configurations depending on model year and gearbox type. As drivetrain specialists, we understand the importance of matching every component to your car's technical specifications precisely. An Audi A4 2.0 TDI places high demands on its power transmission, especially given the strong torque delivered by the diesel engine to the front wheels or the all-wheel drive system. We supply complete drive shafts engineered to meet or exceed original equipment performance and service life.

By focusing on quality, we ensure your car retains its characteristic driving feel and reliability for a long time to come. Our products are tested to withstand European climates and the stresses of both motorway cruising and urban traffic. With over 20 matching products for this specific model variant, we offer a solution whether you need a cost-effective replacement part or a reinforced component.

What does a drive shaft do on an Audi A4 2.0 TDI?

The drive shaft is a vital part of the vehicle's power transmission system. Its primary role on an Audi A4 2.0 TDI is to transfer torque from the gearbox directly to the road wheels, propelling the car forwards or backwards. Because the Audi A4 is frequently front-wheel drive or fitted with the advanced Quattro system, the driveshaft must handle substantial power transmission while accommodating the angles caused by steering and suspension movements. This demands high-grade materials and exceptional manufacturing precision.

A complete drive shaft consists of an axle bar with an inner and an outer CV joint, protected by CV boots filled with specialist grease. On the 2.0 TDI engine, it is particularly important that the shaft is correctly dimensioned to cope with the engine's torque without inducing vibrations or imbalance in the drivetrain. A properly functioning drive shaft not only aids propulsion but is also essential for the stability and anti-lock braking systems to operate correctly via the ABS ring.

Common signs of wear

There are several clear symptoms indicating that a drive shaft on your Audi A4 2.0 TDI is worn or failing. One of the most common signs is a rhythmic clicking or knocking noise heard during tight turns at low speed, which typically points to a worn outer CV joint. If you instead experience vibrations through the steering wheel or the entire bodyshell during acceleration, the inner CV joint may have developed play. These vibrations often subside when you lift off the accelerator, which is a classic indicator of drivetrain issues.

Other signs include visible grease splattered on the inside of the wheel rim or around the wheel arch. This is usually caused by a split CV boot. When a boot tears, dirt and moisture enter the joint while the essential lubricating grease escapes, quickly causing complete failure. Detecting these issues early often saves money by allowing you to resolve the problem before the shaft snaps entirely, which would otherwise leave the car stranded at the roadside.

How to choose the correct drive shaft

To choose the correct drive shaft for your Audi A4 2.0 TDI, the most reliable method is to select your car's exact make, model and engine variant in our search filter. Significant variations exist in length, spline count (teeth) and ABS ring design depending on whether the car has a manual or automatic gearbox (such as Multitronic or S-tronic). Furthermore, shafts differ between front-wheel drive models and Quattro all-wheel drive cars, where rear drive shafts also come into play.

Always verify whether the left or right side needs replacing, as these are rarely identical on the Audi A4. We also recommend checking if your car has specific chassis specifications or brake system dimensions that affect part selection. Thanks to our deep category expertise and precise filtering, we help you choose the right part straight away, avoiding unnecessary returns and ensuring a swift, trouble-free repair.

Related components to inspect

Please also check these exact pages for the same vehicle when working on your drive shaft:

When one drivetrain component shows signs of wear, related parts on the vehicle often require inspection too. By comparing these dedicated pages for the Audi A4 2.0 TDI, it becomes easier to determine whether an issue lies with the drive shaft itself or another nearby part of the transmission.

This is particularly relevant on models where vibrations, play and unusual noises can transfer symptoms across several parts in the same drivetrain. A quick check of related categories reduces the risk of replacing one correct part while overlooking an adjacent component that causes the same underlying fault.

Replacing worn ancillary parts while the drive shaft is already removed saves both time and future workshop labour. A thorough inspection of the front suspension alongside the replacement will ensure your car feels like new on the road again.

Why buy from CVJoint24?

CVJoint24 is the international shop of a Swedish driveline specialist, supplying quality components from our central warehouse in Helsingborg, Sweden. We combine a vast range with deep technical expertise to deliver the best possible shopping experience. When you buy from us, our accurate vehicle selector based on make, model and engine ensures you get the right part every time. We know your Audi A4 2.0 TDI is essential to your everyday routine, so we dispatch in-stock items promptly to help you get back on the road without delay.

Our focus is on offering high-precision components that are straightforward to fit and built to last. With our specialist knowledge, we can guide you to the right choice even when multiple technical variations exist for the same model. Choosing CVJoint24 gives you access to an extensive selection of drive shafts and related components across the EU, ensuring your car runs safely and free of vibrations. Welcome to your online drivetrain specialist.

Frequently asked questions about drive shafts for Audi A4 2.0 TDI

How do I know if my Audi A4 2.0 TDI needs a new drive shaft?

The most common signs are clicking noises when turning, vibrations under acceleration, or visible grease leaks from damaged CV boots around the wheel arch.

Can I replace just the CV joint instead of the entire drive shaft?

Yes, if the shaft bar itself is undamaged, you can replace just the inner or outer CV joint. We offer both complete drive shafts and individual joints for Audi A4 2.0 TDI.

Is there a difference between drive shafts for manual and automatic gearboxes?

Yes, the length and gearbox mountings can differ between manual transmissions and automatics such as Multitronic or S-tronic. Select your exact make, model and engine to find the right part.

What is included when I buy a complete drive shaft from you?

Our complete drive shafts are supplied fully assembled with inner and outer CV joints, boots, grease and the necessary mounting hardware, such as bolts or nuts.

Does the same drive shaft fit both the right and left sides of my Audi?

Usually not. On the Audi A4 2.0 TDI, the right- and left-hand sides often have different lengths and designs, so it is important to check which side you require.

How quickly can I receive a new drive shaft?

We offer fast delivery across Europe on most of our stocked drive shafts, ensuring you minimise the downtime for your Audi A4 in the garage.