Drive shafts for Audi A5 Sportback 2.0 Tfsi Quattro

In need of a replacement drive shaft for your Audi A5 Sportback 2.0 Tfsi Quattro? As Swedish driveline specialists, we supply an extensive range of drive shafts specifically matched to...

Products for Drive shafts for Audi A5 Sportback 2.0 Tfsi Quattro

11 products
1 - 11 of 11
Item no.:3140091
  • Position: Front
  • Flange diameter: 123 mm
  • Total length: 469 mm
  • Splines wheel side: 42
Item no.:4147394
  • Position: Rear left
  • Total length: 587 mm
  • Splines wheel side: 42
Item no.:5112160
  • Position: Rear right
  • Total length: 545 mm
  • Splines wheel side: 42
Item no.:6164119
  • Position: Rear
  • Flange diameter: 100 mm
  • Total length: 626 mm
  • Splines wheel side: 42
Item no.:6120765
  • Position: Rear
  • Flange diameter: 100 mm
  • Total length: 630 mm
  • Splines wheel side: 42
Item no.:3138234
  • Position: Front
  • Flange diameter: 123 mm
  • Total length: 458 mm
  • Splines wheel side: 42
Item no.:3110198
  • Position: Front
  • Flange diameter: 123 mm
  • Total length: 458 mm
  • Splines wheel side: 42
Item no.:3152238
  • Position: Front
  • Flange diameter: 123 mm
  • Total length: 466 mm
  • Splines wheel side: 42
Item no.:319265
  • Flange diameter: 123 mm
  • Total length: 465 mm
  • Splines wheel side: 42
Item no.:314165
  • Position: Front
  • Flange diameter: 123 mm
  • Joint diameter: 83,6 mm
  • Total length: 466 mm
  • ABS teeth: 45

Drive shafts for Audi A5 Sportback 2.0 Tfsi Quattro

Owning an Audi A5 Sportback 2.0 Tfsi Quattro means appreciating a balance of elegant styling and advanced all-wheel-drive engineering. The drive shaft is a vital component within this layout, tasked with transferring power from the gearbox and differentials out to the road wheels. In a Quattro model, drive shafts are subjected to heavy loads, especially under hard acceleration and fast cornering when torque shifts dynamically across both axles. At CVJoint24, we specialise in these components to provide replacement parts that easily cope with the high demands of modern Audi drivetrains.

Our catalogue for the Audi A5 Sportback 2.0 Tfsi Quattro includes several targeted parts, delivering dependable coverage across different model years and mechanical configurations. Every driveshaft is precision-engineered to guarantee optimal balance and long service life. Because the Quattro system relies on exact synchronisation across all four wheels, high-grade replacements that match original equipment standards are crucial to prevent premature wear on related transmission components.

What does the drive shaft do on the Audi A5 Sportback 2.0 Tfsi Quattro?

The drive shaft on an Audi A5 Sportback 2.0 Tfsi Quattro serves as the final link in the mechanical driveline. It channels the torque produced by the 2.0 TFSI engine, as directed through the Quattro differentials. Beyond simply rotating the wheel, the drive shaft must accommodate continuous suspension travel and steering movements without losing efficiency or introducing driveline vibrations. This flexibility is delivered by the inner and outer CV joints installed at either end of the shaft.

On an all-wheel-drive car such as the Audi A5 Sportback, there are four drive shafts in total – two at the front and two at the rear. The front shafts manage steering angles alongside driving forces, demanding exceptional articulation from the outer constant velocity joints. The rear shafts concentrate primarily on straight power transfer and suspension travel. Flawless operation of all four driveshafts is essential for the electronic stability control and Quattro system to react effectively, especially on low-grip European roads in wet or wintry weather.

Common signs of wear

Several unmistakable symptoms point towards a worn drive shaft on your Audi A5 Sportback 2.0 Tfsi Quattro. One of the most typical indicators is a metallic clicking or knocking noise on full steering lock at lower speeds, which usually points to a worn outer CV joint. If you experience distinct shuddering or vibrations through the cabin under hard acceleration, the inner CV joint may have excessive play or the shaft itself could be out of balance.

Another clear warning sign is grease splattered across the inside of the alloy wheel or wheel arch liner. This usually stems from a split CV boot, which flings out lubricating grease and lets road grit infiltrate the joint assembly. Left unchecked, the joint will rapidly fail from excessive friction and heat. Quattro drivers should also watch for unusual noises from under the centre of the car, which can signify wear in the propeller shaft or its centre bearing – components operating in close harmony with the drive shafts.

How to choose the correct drive shaft

Selecting the correct drive shaft for your Audi A5 Sportback 2.0 Tfsi Quattro requires care, as configurations vary depending on whether the car uses a manual gearbox or an S-tronic dual-clutch transmission, as well as specific chassis splits. The most reliable approach to guarantee the right fit is to filter by your car's exact make, model and engine variant in our catalogue, eliminating guesswork and mismatched orders.

When ordering, always confirm whether you need the left or right-hand side, as well as the front or rear axle. On the Audi A5 Sportback, shafts often feature distinct overall lengths and spline counts depending on their mounting position. We generally advise replacing the complete drive shaft assembly if the joints are badly worn; this is often more economical and ensures greater durability than replacing individual components separately. With our fitment guarantee, you can order with absolute confidence.

Related parts to check

Be sure to check these related pages for the same vehicle when working on the drive shaft:

When one drivetrain component exhibits wear, adjoining parts on the same car often require attention as well. By cross-checking these exact pages for the Audi A5 Sportback 2.0 Tfsi Quattro, you can readily determine whether an issue lies purely in the drive shaft or in a connected section of the driveline.

This is especially important on models where vibrations, play and mechanical noises can travel across interconnected driveline assemblies. Inspecting related categories ensures you don't merely change one component while overlooking an adjacent worn part causing the very same symptom.

Thoroughly checking the entire drivetrain at the same time will save you both time and workshop labour down the line. For instance, a healthy propeller shaft on your Audi A5 Sportback 2.0 Tfsi Quattro is vital for curbing unwanted driveline resonance that could otherwise overstress your drive shaft joints prematurely.

Why buy from CVJoint24?

CVJoint24 is your trusted European destination for specialist driveline parts. As an international shop backed by a Swedish driveline specialist, we pair comprehensive technical know-how with an extensive range to give Audi drivers an outstanding experience. Our focus centres on quality and engineering precision, offering components built to handle demanding European climates and performance driving. Choosing us means receiving dependable spare parts supported by genuine drivetrain expertise.

Finding the right component is straightforward when selecting your specific make, model and engine, backed by our clear fitment guarantee. With streamlined logistics dispatched directly from our central Swedish warehouse, we get parts out quickly across the EU to get your Audi A5 Sportback 2.0 Tfsi Quattro back on the road promptly. Ordering the correct component first time spares you unnecessary hassle and shipping returns, making us the natural choice for DIY enthusiasts and trade garages alike.

Frequently asked questions about drive shafts for Audi A5 Sportback 2.0 Tfsi Quattro

How do I know if the drive shaft fits my Audi A5 Sportback 2.0 Tfsi Quattro?

The most reliable method is to select your vehicle make, model and engine variant in our search filter. We stock 10 specific parts for this model, and our fitment guarantee ensures you receive the correct component for your car's exact specifications.

What are the most common symptoms of a failing drive shaft?

The most common signs are clicking noises when turning (outer joint), vibrations under acceleration (inner joint or imbalance), and visible grease leaking from damaged CV boots.

Can I replace just the CV joint instead of the complete drive shaft?

Yes, we offer both complete drive shafts and individual CV joints. If the shaft itself is undamaged, replacing just the outer or inner CV joint may suffice, though a complete driveshaft is often more cost-effective when wear is extensive.

Does a bad drive shaft affect the Quattro system?

Yes, a defective drive shaft can cause imbalance and vibrations that may ultimately damage the differentials and other components in the Quattro system. It is important to resolve any driveline issues promptly.

How quickly will my new drive shaft be delivered?

We dispatch quickly from our central warehouse for most of our products, ensuring you can get your Audi A5 Sportback 2.0 Tfsi Quattro back on the road without delay.

Is there a difference between the front and rear drive shafts on my car?

Yes, the front and rear drive shafts differ in both design and dimensions. The front shafts also accommodate steering angles, while the rear shafts are tailored to the rear axle geometry. Use our make, model and engine selector to find the correct fitting position.