Propeller shafts for Audi A5 Sportback 2.0 Tfsi Quattro

Looking for a premium-quality propeller shaft for your Audi A5 Sportback 2.0 Tfsi Quattro? As the international shop of a Swedish driveline specialist, we provide model-matched...

Products for Propeller shafts for Audi A5 Sportback 2.0 Tfsi Quattro

6 products
1 - 6 of 6
Item no.:6240054
  • Position: Rear
  • Number of centre bearings: 1
  • Number of joints: 2
  • Total length: 1,630 mm
Item no.:0268209
  • Number of centre bearings: 1
  • Number of joints: 2
  • Total length: 1,529 mm
Item no.:6266751
  • Position: Rear
  • Number of centre bearings: 1
  • Number of joints: 2
  • Total length: 1,493 mm
Item no.:6249030
  • Position: Rear
  • Number of centre bearings: 1
  • Number of joints: 3
  • Total length: 1,640 mm
Item no.:628759
  • Position: Rear
  • Total length: 1,675 mm
Item no.:621060
  • Position: Rear
  • Total length: 1,646 mm

Propeller shafts for Audi A5 Sportback 2.0 Tfsi Quattro

The propeller shaft is a vital component in the power transmission of your Audi A5 Sportback 2.0 Tfsi Quattro. Because this model features the advanced Quattro system, it requires a propeller shaft capable of managing the torque that the 2.0 TFSI engine delivers to the rear wheels. A properly functioning prop shaft is essential for maintaining the car's performance and driving dynamics. We offer carefully selected propeller shafts specifically adapted to this exact vehicle configuration, ensuring that balance and durability meet original equipment specifications. With six matched products in our range for this specific model, we provide solutions that cover most requirements, whether you need a complete replacement or specific individual shaft components.

What does the propeller shaft do on an Audi A5 Sportback 2.0 Tfsi Quattro?

The primary task of the propeller shaft on an Audi A5 Sportback 2.0 Tfsi Quattro is to transmit rotational torque from the gearbox and transfer box to the rear differential. On a four-wheel-drive car such as the Quattro models, this is a critical link operating constantly under load. The shaft must be perfectly balanced to prevent vibrations, especially at higher speeds where rotational velocity is substantial. It is engineered to accommodate the angular deflections that occur as the car's suspension articulates, enabled by integrated joints. Without an intact prop shaft, the four-wheel-drive system cannot operate, drastically reducing handling performance and safety, particularly during challenging European winters.

Common signs of wear

Several clear symptoms indicate that the propeller shaft on your Audi A5 Sportback is becoming worn. The most frequent sign is vibration felt through the cabin floor or seats, often at specific speed ranges. These vibrations are usually caused by imbalance or a deteriorating centre bearing. Another common symptom is a clunking noise when engaging gear or abruptly lifting off the throttle, which points to excessive play in the universal joints or CV joints. If you hear a whining or grinding sound from underneath the vehicle, the centre bearing races may be damaged. Ignoring these symptoms can lead to consequential damage to both the gearbox and the rear differential, making it far more cost-effective to resolve issues promptly.

How to choose the correct propeller shaft

Selecting the right propeller shaft for an Audi A5 Sportback 2.0 Tfsi Quattro requires care. Variations exist depending on transmission type and year of manufacture, meaning overall length and flange fittings can vary. The most reliable way to ensure correct fitment is to filter by your car's make, model and engine variant in our search tool. By entering your vehicle's exact specifications, you will find components technically verified for your precise model. We want you to find the right part first time, saving you time and avoiding incorrect orders. You can also inspect your current shaft for specific markings or part numbers to cross-reference against our specifications, guaranteeing a seamless fit in your drivetrain.

Related parts to check

Be sure to check these dedicated pages for the same vehicle when working on the propeller shaft:

When a drivetrain component shows signs of wear, neighbouring parts on the same car often require attention too. Comparing these exact pages for the Audi A5 Sportback 2.0 Tfsi Quattro makes it easier to diagnose whether the fault lies strictly with the propeller shaft or with an adjacent section of the drivetrain.

This is particularly relevant on models where vibrations, play and unwanted noises can transfer symptoms across several parts in the same assembly. A quick check of related categories reduces the risk of replacing one component while overlooking an adjoining part that contributes to the very same problem.

When inspecting the propeller shaft, it is wise to examine other parts of the drivetrain that undergo similar wear. A worn centre bearing is among the most frequent causes of prop shaft issues, and we regularly recommend checking propeller shaft centre bearings for Audi A5 Sportback 2.0 Tfsi Quattro during diagnosis. Here are several other key components to monitor:

  • Drive shafts for Audi A5 Sportback 2.0 Tfsi Quattro – inspect for vibration and radial play.
  • Inner CV joints for Audi A5 Sportback 2.0 Tfsi Quattro – essential for smooth power delivery under acceleration.
  • Flexible couplings (doughnuts) – rubber discs that cushion torsional shocks in the propeller shaft.
  • Differential oil seals – check for fluid leaks where the prop shaft connects to the rear axle.
Replacing worn neighbouring parts at the same time extends the operating life of your entire drivetrain and ensures a smooth, vibration-free ride.

Why buy from CVJoint24?

CVJoint24 is the international shop of a Swedish driveline specialist, dispatching directly across the EU from our warehouse in Helsingborg, Sweden. We understand the precise technical demands placed on components for the Audi A5 Sportback 2.0 Tfsi Quattro and supply only high-precision parts. With our fitment guarantee, you can be confident that the part you order will fit your car correctly. We combine deep technical knowledge with a comprehensive range, ensuring you always find the right spare part at a competitive price. When you choose us, you receive more than just a car part: you get access to dedicated driveline specialists committed to keeping your Audi running smoothly and reliably on the road.

Frequently asked questions about propeller shafts for Audi A5 Sportback 2.0 Tfsi Quattro

What are the most common symptoms of a failing propeller shaft on an Audi A5 Sportback?

The most common signs are vibrations through the chassis while driving, clunking noises under load changes, and a grinding sound from the centre of the car, which often indicates a worn centre bearing.

Can I replace just the centre bearing instead of the complete propeller shaft?

Yes, in many cases it is possible to replace only the centre bearing if the shaft itself and its universal joints are otherwise in good condition. We supply model-specific centre bearings for the Audi A5 Sportback 2.0 Tfsi Quattro.

How do I know the propeller shaft fits my Audi A5 Sportback 2.0 Tfsi Quattro?

The most reliable way is to select your vehicle by make, model and engine variant. This filters out the propeller shafts tailored specifically to your car's engine, gearbox and Quattro system.

Are the propeller shafts balanced prior to delivery?

Yes, all complete propeller shafts we supply are factory-balanced to ensure vibration-free running and optimum service life right from installation.

Why is the correct propeller shaft so crucial for the Quattro system?

The Quattro system demands precise synchronisation and balance between the front and rear axles. An incorrect or unbalanced prop shaft can cause premature wear on the transfer box and differential.

Do you offer a fitment guarantee on propeller shafts?

Yes, we offer a fitment guarantee when you select your vehicle by make, model and engine, ensuring that the part is fully compatible with your specific Audi model.