Looking for a replacement drive shaft for your Audi A5 2.0 Tfsi Quattro? As driveline specialists, we supply a carefully chosen range of drive shafts tailored specifically to the demands...
Finding the right drive shaft for an Audi A5 2.0 Tfsi Quattro requires precision, as the four-wheel-drive system places high demands on component durability and balance. We supply matching products for this exact model variant, ensuring you can find a part that matches original specifications. A drive shaft in a Quattro vehicle is subjected to complex forces because torque is distributed across all four wheels, making material selection and manufacturing precision essential for the car's handling. Our drive shafts are engineered to handle the torque delivered by the 2.0 Tfsi engine while maintaining the refined, quiet ride expected of an Audi A5. By choosing a model-matched part, you reduce the risk of future vibrations and extend the service life of your entire transmission.
The primary job of the drive shaft on your Audi A5 2.0 Tfsi Quattro is to transmit power from the gearbox and differentials out to the road wheels. In a Quattro setup, the drive shafts work alongside a central propeller shaft to deliver seamless power transfer. Each driveshaft consists of an axle bar and two joints that allow the wheels to move up and down with the suspension and steer (on the front axle). For a performance car like the Audi A5, it is vital that the drive shaft can handle rapid acceleration without flexing or introducing imbalance. It must also be dynamically balanced to eliminate cabin resonance. Without functioning drive shafts, power from the engine would never reach the tarmac, making them one of the most vital components in your drivetrain.
Several clear symptoms indicate that a drive shaft on your Audi A5 2.0 Tfsi Quattro is failing. One of the most common signs is a clicking or knocking noise when taking sharp corners, which usually points to a worn outer CV joint. If you experience vibrations throughout the car under acceleration, the inner CV joint, closest to the gearbox or differential, is often the culprit. Another warning sign is grease splattered across the inside of the wheel rim or suspension arch, caused by a split CV boot. If the boot tears, road dirt enters and the lubricating grease escapes, leading to rapid component failure. Ignoring these symptoms can cause the driveshaft to shear completely, leaving the car stranded and potentially causing collateral damage to adjacent components.
To choose the correct drive shaft for your Audi A5 2.0 Tfsi Quattro, the most reliable method is to select your car's exact make, model and engine variant in our shop. Because Audi uses different configurations depending on transmission type (manual, S-tronic or Tiptronic) and model year, overall shaft lengths and spline counts can vary. It is also important to verify whether your car has specific requirements for the ABS ring, which is sometimes fitted directly to the CV joint. By selecting your specific engine and model specifications, you filter out the options that match your car technically. Always double-check overall length and spline teeth counts if you are uncertain. Our fitment guarantee means we take full responsibility for compatibility, provided you have selected the correct vehicle details when ordering.
Be sure to check these dedicated pages for the same vehicle when working on your drive shaft:
When a drivetrain component shows signs of wear, related parts on the same car often require attention as well. Comparing these exact pages for the Audi A5 2.0 Tfsi Quattro makes it easier to diagnose whether the fault lies in the drive shaft itself or in an adjacent section of the drivetrain.
This is particularly relevant on models where vibrations, play and unwanted noises can transfer symptoms across several driveline components. Checking related categories reduces the risk of replacing one part while overlooking a neighbouring component that contributes to the same problem.
Replacing a damaged CV boot in good time can often save an entire drive shaft, while a worn centre bearing on the prop shaft can generate vibrations that eventually ruin your drive shaft joints.
CVJoint24 is the international shop of a Swedish driveline specialist shipping across the EU from our Helsingborg warehouse. We focus exclusively on this area, giving us a level of expertise and depth of range that general car parts stores rarely provide. When ordering from us, you can trust our accurate data matching to deliver the right part first time. We always provide a fitment guarantee and aim to maintain the most relevant range for your Audi A5 2.0 Tfsi Quattro. With our efficient logistics and fast EU dispatch, we help minimise the time your car spends off the road in the garage. Our goal is to make maintaining your driveline simple, reliable and cost-effective with quality spare parts that keep your Audi performing at its best.
The simplest and most reliable way is to select your car's make, model, and engine variant in our search filter. This filters out the exact parts suited to your car's specific gearbox and Quattro system.
The most frequent signs are clicking noises when turning (outer joint), vibrations under acceleration (inner joint), or visible grease leaking from a split CV boot.
Yes, if the shaft bar itself is undamaged, you can often replace just the inner or outer CV joint. We supply both complete drive shafts and individual CV joints for the Audi A5.
Yes, front and rear drive shafts have different lengths, mountings, and specifications. Always check the product description carefully to confirm which fitting position the part is intended for.
Our complete drive shafts are supplied fully assembled with inner and outer CV joints, CV boots, and all necessary fitting hardware so you can install the part straight away.
We aim for fast dispatch on all in-stock items, ensuring you can get your Audi A5 2.0 Tfsi Quattro back on the road without delay.