Drive shafts for Audi A6 Avant 1.8 T Quattro

Need a new drive shaft for your Audi A6 Avant 1.8 T Quattro? As driveline specialists, we supply a carefully chosen range tailored to your specific car model. With the Quattro...

Products for Drive shafts for Audi A6 Avant 1.8 T Quattro

7 products
1 - 7 of 7
Item no.:3112965
  • Position: Front
  • Splines wheel side: 38
  • Total length: 544 mm
  • Joint diameter: 98 mm
  • ABS teeth: 45
Item no.:1178710
  • Position: Front left
  • Splines wheel side: 38
  • Total length: 625 mm
  • Joint diameter: 98 mm
  • ABS teeth: 45
Item no.:2161734
  • Position: Front right
  • Splines wheel side: 38
  • Total length: 643 mm
  • Joint diameter: 98 mm
  • ABS teeth: 45
Item no.:314616
  • Position: Front
  • Splines wheel side: 38
  • Total length: 544 mm
  • Joint diameter: 98 mm
  • ABS teeth: 45
Item no.:213042
  • Position: Front right
  • Splines wheel side: 38
  • Total length: 661 mm
  • Diameter 1: 88 mm
  • ABS teeth: 45
Item no.:619872
  • Position: Rear
  • Splines wheel side: 38
  • Total length: 653 mm
  • Diameter 1: 88 mm
  • ABS teeth: 45
Item no.:616841
  • Position: Rear
  • Splines wheel side: 38
  • Total length: 654 mm
  • ABS teeth: 45

Drive shafts for Audi A6 Avant 1.8 T Quattro

Owning an Audi A6 Avant 1.8 T Quattro means valuing both performance and all-weather capability. Maintaining these appreciated qualities requires a drivetrain in peak condition. The drive shaft is a critical component transferring engine torque from the gearbox and differentials out to the wheels. On a car equipped with all-wheel drive, such as your Audi A6 Avant 1.8 T Quattro, there are drive shafts both front and rear, placing higher demands on maintenance and the choice of the correct spare parts. We have gathered the most relevant, high-precision products so you can restore your car's original driving feel and road safety.

What does a drive shaft do on an Audi A6 Avant 1.8 T Quattro?

The main task of the drive shaft is to transfer power while accommodating suspension movement and, for the front axles, steering angle. It consists of a sturdy shaft bar with CV joints at both ends, protected by CV boots. The inner joint mounts to the gearbox or differential, handling mainly axial movement as the wheels travel up and down. The outer joint at the wheel hub allows for wider steering angles when turning. For an Audi with the Quattro system, synchronisation between the front and rear axles is crucial for the all-wheel drive to work smoothly without unwanted drivetrain stress or energy loss. A properly functioning driveshaft ensures that power reaches the road efficiently and free of vibrations.

Common signs of wear

Several distinct symptoms indicate that a drive shaft on your Audi A6 Avant 1.8 T Quattro is beginning to fail. One of the most common signs is a rhythmic clicking or knocking sound on full steering lock at low speeds, which usually points to a worn outer CV joint. If you instead experience vibrations throughout the car under acceleration, the inner constant velocity joint may have developed play. It is also vital to inspect the CV boots visually on a regular basis. If a boot splits, lubricating grease escapes and dirt enters, rapidly destroying the joint's bearing surfaces. Ignoring these faults can ultimately lead to total failure, causing a complete loss of drive and leaving you stranded.

How to choose the correct drive shaft

When selecting a new drive shaft, several technical parameters must match precisely. It is not always enough to know that you have an Audi A6 Avant 1.8 T Quattro, as factors such as gearbox type and the exact production date can affect shaft length and the spline count—the teeth at either end. Furthermore, shafts differ between the right and left sides, as well as between the front and rear axles on Quattro models. To be completely certain you order the correct part, we recommend selecting your vehicle by make, model and engine variant. This filters out the components compatible with your car's exact configuration, saving time and preventing costly incorrect purchases.

Related parts to check

You can also check these exact pages for the same car when working on your drive shaft:

When a drivetrain component shows signs of wear, neighbouring parts on the same car often warrant inspection too. By comparing these specific pages for the Audi A6 Avant 1.8 T Quattro, it becomes much easier to determine whether an issue lies with the drive shaft itself or another adjacent section of the power transmission.

This is particularly relevant on models where vibrations, play and noises can transfer between different parts of the same drivetrain. A quick check of related categories reduces the risk of replacing the right type of part while overlooking an adjacent component that contributes to the very same issue.

Why buy from CVJoint24?

As a Swedish driveline specialist shipping across the EU from our warehouse in Helsingborg, Sweden, we offer expertise that generic car parts retailers often lack. We understand the technical nuances of an Audi A6 Avant 1.8 T Quattro and have developed our range with an emphasis on both depth and quality. With our fitment guarantee, you can be confident that the part you order will fit your car accurately. We always strive to help you select the right component straight away, aiming to dispatch your items promptly to minimise off-road time. By choosing us, you get more than just a spare part—you gain access to a dedicated drivetrain partner committed to keeping your Audi in top condition year after year.

Frequently Asked Questions about drive shafts for Audi A6 Avant 1.8 T Quattro

How do I know if my Audi A6 Avant 1.8 T Quattro needs a new front or rear drive shaft?

The symptoms are often similar, but the sound originates from different ends of the car. Clicking noises when cornering point to the front axle, whilst unusual noises from the rear end under load indicate the rear axle.

Is there a difference in drive shafts between manual and automatic gearboxes?

Yes, both the overall length and the gearbox mounting often differ between the two options. Always select your vehicle by make, model and engine to ensure you get the correct version for your car.

What is included when I buy a complete drive shaft from you?

Our complete drive shafts are supplied fully assembled with both inner and outer CV joints, CV boots and grease, ready for direct installation on your Audi.

Can I replace just the CV boot if the joint is still intact?

Absolutely. If you spot a split CV boot in good time before dirt and moisture damage the joint's bearing surfaces, fitting a new boot is a very cost-effective solution that prolongs the life of the shaft.

Why does my Audi vibrate under acceleration?

This is a classic sign of wear in the inner CV joint. If the vibrations cease as soon as you lift off the accelerator, the drive shaft is a very likely cause.

Do I need to replace both sides at the same time?

It is not strictly essential, but because drive shafts on the same axle have typically undergone the exact same wear and tear, many drivers choose to replace them in pairs to prevent future issues.