Drive shafts for Audi Q4 Sportback 40 E Tron

Find drive shafts for Audi Q4 Sportback 40 E Tron at CVJoint24. Select your model for an exact fit and order with fast EU delivery.

Products for Drive shafts for Audi Q4 Sportback 40 E Tron

3 products
1 - 3 of 3
Item no.:4160914
  • Position: Rear left
  • Total length: 634 mm
  • Splines gearbox side: 37
  • Splines wheel side: 38
Item no.:5174513
  • Position: Rear right
  • Total length: 859 mm
  • Splines gearbox side: 37
  • Splines wheel side: 38
Item no.:113340
  • Position: Front left
  • Total length: 658 mm
  • Splines gearbox side: 33
  • Splines wheel side: 38

Drive shafts for Audi Q4 Sportback 40 E Tron

Maintaining the drivetrain on an advanced electric car such as the Audi Q4 Sportback 40 E Tron calls for top-quality components. The drive shaft is a vital link in the power transmission, and for an EV the demands are often higher than for traditional internal combustion engines. This is due to the instant torque delivered by the electric motor, placing significant stress on the shaft's construction and choice of materials. With us, you will find drive shafts specifically developed to meet these technical specifications and guarantee a quiet, vibration-free driving experience.

Our range for Audi Q4 Sportback 40 E Tron is carefully selected to match or exceed original equipment performance. By focusing on precision and durability, we offer solutions that withstand the stresses of European roads and changing weather conditions. When choosing a drive shaft from a specialist like CVJoint24, you can be confident that you receive a part engineered to fit your car's unique architecture perfectly.

What does the drive shaft do on the Audi Q4 Sportback 40 E Tron?

The primary job of the drive shaft on your Audi Q4 Sportback 40 E Tron is to transfer rotational energy from the electric motor's reduction gearbox directly to the road wheels. Because the 40 E Tron model is rear-wheel drive, these shafts are fitted on the rear axle. They must not only cope with high rotational speeds, but also accommodate suspension movement and steering angles without losing efficiency or generating unwanted noise.

In an electric vehicle, the driveshaft also plays an essential role in regenerative braking. When you lift off the accelerator and the car uses the electric motor to brake and recharge the battery, torque travels in reverse through the drive shaft. This demands an axle that is resilient in both directions of rotation, as well as CV joints with minimal backlash. A healthy drive shaft therefore contributes not only to propulsion, but also to the car's overall energy efficiency and range.

Common signs of wear

Even though the Audi Q4 Sportback 40 E Tron is a modern design, drive shafts are mechanical wear items that eventually need replacing. One of the most typical signs of a failing drive shaft is a clicking or knocking noise under sharp cornering or hard acceleration. This is often caused by grease escaping from the CV joint past a split CV boot, leading to metal-on-metal contact and rapid wear.

Another common symptom is vibrations felt through the chassis during acceleration. Because an electric car is otherwise whisper-quiet, these mechanical vibrations quickly become noticeable to the driver. If you feel the car shuddering or hear an out-of-balance hum at particular speeds, you should inspect the drive shafts straight away. Ignoring these symptoms can lead to secondary damage to both wheel bearings and the gearbox, making repairs far more costly over time.

How to choose the correct drive shaft

Finding the right component for a specific variant like the Audi Q4 Sportback 40 E Tron can seem daunting, but we have made the process simple. The most reliable step is to select your car by its exact make, model and engine variant. As different motor options and trim levels can feature variations in shaft length and spline counts, verifying your vehicle details ensures an accurate fit. Always check whether you need to replace the left or right side, as they are frequently different lengths.

When comparing options, look closely at technical specifications such as overall length and hub connection type. For the Audi Q4 Sportback 40 E Tron, it is crucial that the replacement is rated for the electric car's substantial weight and torque output. We always recommend fitting a complete drive shaft if the joints are worn, as this is usually far more cost-effective and provides greater long-term reliability than rebuilding a single joint.

Related parts to inspect

Be sure to check these relevant pages for the same vehicle when working on the drive shaft:

When one drivetrain component shows signs of wear, neighbouring parts on the same car often require attention too. Reviewing these exact pages for Audi Q4 Sportback 40 E Tron makes it much easier to determine whether the problem lies with the drive shaft itself or with an adjacent part of the power transmission.

This is especially important on models where vibrations, play and unwanted noises can transfer symptoms across several parts of the same driveline. A quick check of related categories reduces the risk of replacing the right type of part while overlooking an adjacent component that causes the same fault.

While working on your car's drive shaft, it is wise to inspect the surrounding components in your drivetrain. Often, drive shaft failure has been triggered by—or has caused wear to—other parts. Pay special attention to the CV boots on the opposite side, as rubber tends to perish at a similar rate on both sides. A tiny tear in a boot is the beginning of the end for an otherwise sound constant velocity joint.

Here are several key pages to explore to keep your Audi in prime condition:

  • Audi Q4 Sportback 40 E Tron - Overview for your specific model
  • Drive shafts for Audi - Explore the full range for the marque
  • Audi - Find other relevant driveline components
Do not forget to inspect the wheel bearings as well. If a driveshaft has been running loose or vibrating heavily, the wheel bearing may have suffered damage. Replacing them together saves both time and labour costs in the long run.

Why buy from cvjoint24.com?

CVJoint24 is your dedicated expert in vehicle power transmission. We combine deep technical expertise with an extensive inventory covering everything from everyday runabouts to modern electric vehicles like the Audi Q4 Sportback 40 E Tron. Our priority is supplying the correct part first time, backed by our comprehensive catalogue and accurate fitment guidance. When shopping with us, you can trust that the component you order fits your car properly.

We know how critical it is to get your vehicle back on the road without delay. That is why we offer prompt dispatch across the European Union from our Swedish central warehouse, keeping waiting times to a minimum. As a Swedish driveline specialist committed to quality and customer satisfaction, we are the trusted choice for DIY mechanics and professional garages who demand the best for their drivetrain. Welcome to a smoother, more reliable way to buy car parts online.

Frequently asked questions about drive shafts for Audi Q4 Sportback 40 E Tron

Does this drive shaft fit all Audi Q4 Sportback models?

No, drive shafts can vary depending on whether the car is rear-wheel drive like the 40 E Tron or all-wheel drive (Quattro). Always select your car's make, model and engine to ensure the correct fitment.

Why do drive shafts wear out faster on electric cars?

Electric cars like the Audi Q4 Sportback 40 E Tron deliver maximum torque instantly from a standstill, placing higher mechanical strain on the drive shafts and joints compared to vehicles with internal combustion engines.

Can I replace just the CV joint instead of the entire drive shaft?

Yes, it is often possible, but on modern cars it is frequently more time-efficient and reliable to replace the complete drive shaft to guarantee that all components are in brand-new condition.

What tools are needed to replace a drive shaft on an Audi Q4 Sportback?

You will typically need a socket set, a torque wrench and specific tools to undo the hub nut. We recommend consulting a workshop manual for the exact specifications.

Are CV boots and grease included when I buy a complete drive shaft?

Yes, when you purchase a complete drive shaft from us, it comes fully assembled with CV boots and the correct amount of grease, ready for installation.

How do I know whether the left or right drive shaft is faulty?

The noise usually reveals which side is affected: clicking while turning left often points to the right outer CV joint, and vice versa. A visual inspection of the CV boots can also provide answers.