Drive shafts for BMW

Find the right drive shaft for your BMW, whether your car is rear-wheel drive, all-wheel drive or front-wheel drive. With over 1,000 model variations in our range, we cover a broad...

Choose model

Choose a model to move to more precise products and the next step in the vehicle tree.

Products for Drive shafts for BMW

5,847 products
3457 - 3480 of 5847
Item no.:514014
  • Splines wheel side: 27
  • Total length: 667 mm
  • Joint diameter, gearbox side: 100 mm
  • Thread size: M24x1.5
Item no.:0181122
  • Splines gearbox side: 27
  • Splines wheel side: 30
  • Total length: 642 mm
Item no.:517719
  • Position: Rear right
  • Splines wheel side: 27
  • Total length: 672 mm
  • Joint diameter: 96 mm
  • ABS teeth: 48
Item no.:418779
  • Position: Rear left
  • Splines wheel side: 27
  • Total length: 608 mm
  • Joint diameter: 96 mm
  • ABS teeth: 48
Item no.:1108022
  • Position: Front left
  • Splines gearbox side: 27
  • Splines wheel side: 30
  • Total length: 564 mm
  • ABS teeth: 48
Item no.:610278
  • Position: Rear
  • Splines wheel side: 30
  • Total length: 653 mm
  • Joint diameter: 95 mm
  • Joint diameter, gearbox side: 106 mm
Item no.:517989
  • Position: Rear right
  • Splines gearbox side: 27
  • Splines wheel side: 28
  • Total length: 802 mm
Item no.:2148910
  • Position: Front right
  • Splines gearbox side: 27
  • Splines wheel side: 30
  • Total length: 1,020 mm
  • Joint diameter: 86 mm
Item no.:1124030
  • Position: Front left
  • Splines gearbox side: 27
  • Splines wheel side: 30
  • Total length: 634 mm
  • Joint diameter: 86 mm
Item no.:615714
  • Position: Rear
  • Splines wheel side: 30
  • Total length: 660 mm
  • Joint diameter, gearbox side: 100 mm
  • Flange diameter: 100 mm
Item no.:616738
  • Position: Rear
  • Splines wheel side: 30
  • Total length: 670 mm
  • Joint diameter, gearbox side: 104 mm
Item no.:414174
  • Splines wheel side: 27
  • Total length: 612 mm
  • Joint diameter, gearbox side: 94 mm
  • Thread size: M24x1.5
Item no.:517949
  • Splines wheel side: 27
  • Total length: 665 mm
  • Joint diameter, gearbox side: 94 mm
  • Thread size: M24x1.5
Item no.:518274
  • Position: Rear right
  • Splines gearbox side: 32
  • Splines wheel side: 30
  • Total length: 830 mm
Item no.:611970
  • Position: Rear
  • Splines gearbox side: 27
  • Splines wheel side: 31
  • Total length: 733 mm
Item no.:0121616
  • Splines gearbox side: 28
  • Splines wheel side: 31
  • Total length: 545 mm
Item no.:1160562
  • Position: Front left
  • Splines gearbox side: 27
  • Splines wheel side: 37
  • Total length: 574 mm
Item no.:2176733
  • Position: Front right
  • Splines gearbox side: 27
  • Splines wheel side: 37
  • Total length: 872 mm
Item no.:1169777
  • Position: Front left
  • Splines gearbox side: 27
  • Splines wheel side: 37
  • Total length: 555 mm
Item no.:2143855
  • Position: Front right
  • Splines gearbox side: 27
  • Splines wheel side: 37
  • Total length: 855 mm
Item no.:618764
  • Position: Rear
  • Total length: 422 mm
  • Joint diameter: 108 mm
  • Joint diameter, gearbox side: 108 mm
  • Diameter 1: 108 mm
Item no.:614245
  • Position: Rear
  • Total length: 417 mm
  • Joint diameter: 100 mm
  • Joint diameter, gearbox side: 100 mm
  • Diameter 1: 100 mm
Item no.:417272
  • Position: Rear left
  • Splines gearbox side: 32
  • Splines wheel side: 30
  • Total length: 777 mm
  • Joint diameter: 94 mm
Item no.:613198
  • Position: Rear
  • Splines gearbox side: 27
  • Splines wheel side: 31
  • Total length: 731 mm
Showing 3457–3480 of 5847 products

Drive shafts for BMW

A drive shaft for BMW is a critical drivetrain component responsible for transferring torque from the gearbox or differential directly to the wheels. BMW is renowned for its engineering precision and driving dynamics, which places exceptionally high demands on driveline component quality. A defective shaft can not only cause unpleasant vibrations but also lead to consequential damage to other drivetrain parts if left unaddressed. With us, you will find an extensive range covering everything from classic models to the latest electrified versions.

Because BMW frequently uses sophisticated suspension systems and powerful engines, the drive shafts are subjected to severe stresses, especially during hard acceleration and cornering. We understand the importance of an exact fit and material choices that match original equipment specifications. By choosing the right drive shaft, you ensure your car's handling characteristics are maintained and power reaches the road exactly as Munich's engineers intended. Our focus is on offering parts that combine durability with technical accuracy to give your BMW a long, trouble-free life on the road.

How drive shafts differ between BMW models

BMW has a diverse vehicle line-up, which means drive shaft design varies considerably depending on the model and drive layout. On rear-wheel drive models, the primary drive shafts are fitted at the rear, whereas xDrive (all-wheel drive) models also feature front drive shafts. These front shafts are often more compact and operate at different angles due to steering inputs, placing unique demands on the articulation of the CV joints. Furthermore, driveshafts differ between manual and automatic transmissions, as well as between different engine options where torque outputs vary significantly.

Another vital factor is the difference between standard specifications and M Sport or dedicated M models. M cars often feature reinforced drive shafts with thicker dimensions to cope with increased power outputs. Body styles, such as Touring (estate) versus Saloon, can also occasionally involve differences in driveline configuration. It is therefore essential not just to check the model name, but also technical specifications such as overall length, spline counts and whether the car is fitted with specific suspension packages. We have the expertise to guide you through these technical nuances to help you find the correct part for your BMW model.

Common signs of wear

Several clear symptoms indicate that a drive shaft on your BMW is beginning to wear or has failed. One of the most common signs is a clicking or knocking noise when turning, which typically points to a damaged outer CV joint for BMW. If you instead experience vibrations throughout the car under acceleration, this may indicate that the inner CV joint, located closest to the gearbox or differential, has developed play. These vibrations can sometimes be mistaken for an unbalanced tyre, but if they disappear when you lift off the accelerator, the drive shaft is the likely culprit.

Another critical warning sign is grease leaking around the CV boots. If a boot splits, road dirt and moisture penetrate the joint while the vital lubricating grease is flung out. This quickly leads to total joint failure. You should also watch out for rust developing beneath the ABS ring, which can cause the ring to crack and trigger error codes in the vehicle's safety systems. Ignoring these symptoms can cause the shaft to snap entirely, resulting in complete loss of drive. Regular driveline inspections are therefore a worthwhile investment for any BMW owner.

How to choose the correct drive shaft for BMW

Selecting the correct drive shaft for a BMW requires precision, as there are often several variations for the same model year. The most reliable way to start is by selecting your car's make, model and engine variant in our search tool. This filters out incompatible components and displays the options technically tailored to your vehicle. However, it is always wise to verify certain physical measurements, such as overall shaft length and the number of splines on both inner and outer joints, as revisions can occur during a production run that require verification.

Also check whether your car has specific factory options affecting the drivetrain, such as xDrive or limited-slip differentials. When replacing a shaft on an all-wheel-drive BMW, it is often advisable to inspect the condition of the shaft on the opposite side and check the car's propeller shaft to ensure the entire drivetrain is in sound order. By taking care during selection and drawing on our technical expertise, you minimise the risk of ordering the wrong part and ensure a straightforward installation. We provide all the technical data you need to make an informed choice.

Popular BMW models to explore

Continue to the correct BMW model for drive shafts:

When a range is extensive, navigating by model is the logical next step. Selecting your exact model directs you to a catalogue view tailored for precise fitment, drivetrain configuration, and the parts specifically engineered for your vehicle.

Whichever series your BMW belongs to, we aim to stock the exact part required. Our system is built to manage the complexity of BMW's model range, allowing you to move quickly from a broad category down to the specific item tailored to your vehicle. This saves time and ensures you obtain the precise technical specification for your driveline.

Why buy from CVJoint24

When you choose CVJoint24, you choose a Swedish driveline specialist with in-depth technical knowledge. We are not a general car parts retailer; we focus dedicatedly on components such as drive shafts, CV joints and power transmission assemblies. This enables us to provide expertise and a product range that few others can match. With an extensive range dedicated to BMW, our coverage extends to uncommon model variants. Our approach centres on supplying the right component straight away, supported by our reliable fitment guidance and easy search by make, model and engine.

We understand that your car is essential for daily life, which is why we prioritise prompt order handling to keep vehicle downtime to a minimum. As our customer, you receive high-quality parts carefully selected to meet the exact standards expected of a BMW. We combine the wide catalogue of a major supplier with the personal service and technical know-how of a focused specialist. Shopping with us gives you peace of mind, quality, and the assurance that your BMW retains its authentic driving dynamics.

Frequently asked questions about drive shafts for BMW

How do I know if my BMW needs a new drive shaft or just a new CV joint?

If the vibrations are severe and the shaft shows visible damage or significant play, replacing the complete drive shaft is usually best. If the issue is merely a clicking sound when turning and the shaft is otherwise in good condition, replacing just the outer CV joint may suffice. However, we often recommend a complete replacement to ensure long-term reliability.

Does the same drive shaft fit both the left and right side of my BMW?

Usually not. On most BMW models, the left and right drive shafts are different lengths due to the position of the differential. It is therefore essential to check the fitting position (front/rear, left/right) before ordering.

What is the difference between drive shafts for BMW xDrive and rear-wheel drive models?

xDrive models also have front drive shafts, which are completely different in design compared to the rear shafts. The front shafts must handle both steering angles and drive torque, making them more complex. The rear driveshafts can also differ in dimensions between AWD and RWD models.

How do I find the correct drive shaft for my BMW?

Selecting your BMW's make, model, year and engine variant on our site is the most reliable way to find the correct parts. This filters according to your specific engine, gearbox and driveline system to ensure accurate results.

Why does my BMW vibrate under acceleration after lowering the car?

When a BMW is lowered, the operating angles of the drive shafts change. If the shafts are already slightly worn, this altered angle can accentuate vibrations from the inner CV joints. In some cases, you may need to fit new drive shafts that can better accommodate the revised operating angles.

Are CV boots included when I buy a complete drive shaft for BMW?

Yes, when you buy a complete drive shaft from us, it comes fully assembled with both inner and outer CV joints, as well as CV boots and grease. It is a 'plug-and-play' solution that saves significant time during installation.

How does a damaged ABS ring on the drive shaft affect my BMW?

A cracked or corroded ABS ring can send incorrect signals to the vehicle's sensors, causing the ABS or DSC (Dynamic Stability Control) to trigger unnecessarily or fail completely. On many BMW models, the ABS reluctor ring is pressed directly onto the drive shaft.