Drive shafts for Fiat 500

Find the right drive shaft for your Fiat 500 by filtering by engine variant and model year. Our range covers components for petrol, diesel and LPG versions of this iconic hatchback. By...

Products for Drive shafts for Fiat 500

15 products
1 - 15 of 15
Item no.:1139408
  • Position: Front left
  • Splines wheel side: 22
  • Total length: 525 mm
  • Thread size: M22x1.5
Item no.:1128440
  • Position: Front left
  • Splines gearbox side: 22
  • Splines wheel side: 22
  • Total length: 611 mm
  • Joint diameter: 76 mm
Item no.:1153599
  • Position: Front left
  • Splines gearbox side: 22
  • Splines wheel side: 25
  • Total length: 612 mm
  • Joint diameter: 79 mm
Item no.:2167242
  • Position: Front right
  • Splines gearbox side: 22
  • Splines wheel side: 25
  • Total length: 845 mm
  • Joint diameter: 79 mm
Item no.:7301974
  • Position: Front right
  • Splines wheel side: 25
  • Total length: 497 mm
  • Joint diameter: 90 mm
  • Joint diameter, gearbox side: 89 mm
Item no.:1112894
  • Position: Front left
  • Splines gearbox side: 24
  • Splines wheel side: 25
  • Total length: 570 mm
  • Joint diameter: 82 mm
Item no.:2172807
  • Position: Front right
  • Splines gearbox side: 24
  • Splines wheel side: 25
  • Total length: 884 mm
  • Diameter 1: 82 mm
Item no.:2105677
  • Splines gearbox side: 22
  • Splines wheel side: 22
  • Total length: 759 mm
  • Joint diameter: 76 mm
  • Joint diameter, gearbox side: 73 mm
Item no.:1182754
  • Position: Front left
  • Splines wheel side: 22
  • Total length: 613 mm
  • Joint diameter: 73 mm
  • Tripod shaft diameter: 29 mm
Item no.:2136460
  • Position: Front right
  • Splines wheel side: 22
  • Total length: 758 mm
  • Thread size: M22x1.5
Item no.:214207
  • Position: Front right
Item no.:111120
  • Position: Front left
  • Splines gearbox side: 22
  • Splines wheel side: 22
  • Total length: 614 mm
Item no.:317947
  • Position: Front
  • Splines wheel side: 25
  • Total length: 469 mm
Item no.:2114947
  • Position: Front right
  • Splines gearbox side: 22
  • Splines wheel side: 22
  • Total length: 850 mm
Item no.:2102428
  • Position: Front right
  • Splines gearbox side: 24
  • Splines wheel side: 25
  • Total length: 875 mm
  • Joint diameter: 84 mm

Drive shafts for Fiat 500

The Fiat 500 is an iconic city car where every drivetrain component plays an essential role in delivering a smooth driving experience. A defective drive shaft can quickly compromise performance and cause expensive consequential damage. Here at CVJoint24, you will find a broad range of drive shafts technically verified to match the exact requirements of your Fiat 500. We understand the importance of precise fitment, especially in such a compact car where tolerances are tight. Choosing the right spare part from the outset saves both time and money during installation. Our range covers most engine variants and model years for this popular model.

What does a drive shaft do on a Fiat 500?

The drive shaft on a Fiat 500 transfers engine torque from the gearbox directly to the front wheels. Because the Fiat 500 is front-wheel drive, the drive shafts must handle suspension travel and steering angles simultaneously while delivering uninterrupted power. This is made possible by the inner and outer CV joints fitted at each end of the shaft. A properly functioning drive shaft ensures power reaches the road without losses or disruptive vibrations, which is vital for the car's driving dynamics and fuel efficiency. Without an intact shaft, the vehicle can easily be left stranded without any drive.

Common signs of wear

Several clear warning signs indicate that a drive shaft on your Fiat 500 is wearing out. One of the most common symptoms is a clicking or knocking sound when turning sharply, typically pointing to a damaged outer joint. If you instead feel vibrations through the steering wheel or body shell under acceleration, it may signal an unbalanced inner constant velocity joint or a bent shaft. Inspecting the CV boots is equally important; if they split, grease escapes and road dirt penetrates, rapidly destroying the bearing surfaces and causing complete failure.

How to choose the right drive shaft

Selecting the correct part for a Fiat 500 can be challenging, as specifications vary depending on the engine variant and gearbox type. Key differences between shafts include total length, the number of splines (teeth) at the ends, and whether the car requires an integrated ABS ring on the shaft. To ensure you purchase the correct component, simply select your car's exact make, model and engine in our vehicle filter. This brings up the products matched to your specific vehicle configuration, preventing incorrect orders and unnecessary returns.

Related components to check

We also recommend checking these related categories for the same vehicle when working on the drive shaft:

When one drivetrain component exhibits wear, adjacent parts on the vehicle often require inspection too. Checking these related pages for the Fiat 500 helps you identify whether an issue lies with the drive shaft itself or with another driveline component.

This is especially important on models where vibrations, play and unwanted noises can transfer symptoms across several parts in the driveline. Reviewing related categories minimises the risk of replacing the right part type while missing an adjoining worn component that contributes to the same problem.

By taking a proactive approach and replacing worn parts promptly, you ensure long service life and dependable reliability for your vehicle's driveline.

Why shop at CVJoint24?

CVJoint24 is your dedicated specialist for drivetrain and power transmission components. As a Swedish driveline specialist, we offer exceptional expertise and an extensive inventory for the Fiat 500. We focus exclusively on core components such as drive shafts, CV joints and boots, allowing us to deliver superior product quality and better technical support than general car parts retailers. With our vehicle catalogue based on make, model and engine, you can always find the correct driveshaft for your car, dispatched quickly and reliably directly from our Swedish warehouse. We combine specialist know-how with high stock availability for your peace of mind.

Frequently Asked Questions about Drive Shafts for Fiat 500 – Quality Drivetrain Parts

How do I know if the drive shaft on my Fiat 500 is damaged?

The most common signs are clicking noises when turning, vibrations under acceleration, or visible grease leaks from damaged CV boots.

Can I replace just a CV joint instead of the entire drive shaft?

Yes, if the shaft itself is straight and undamaged, you can often replace just the outer or inner CV joint to save money.

Do all drive shafts fit every Fiat 500 model?

No, they differ depending on the engine (e.g. 1.2, TwinAir or Multijet) and gearbox. Always select your vehicle's make, model and engine to find the right part.

Why does my Fiat 500 vibrate during acceleration?

Vibrations under load are often caused by wear in the inner CV joint, creating an imbalance in the power transmission from the gearbox.

Are CV boots and grease included when I buy a complete drive shaft?

Yes, our complete drive shafts are delivered fully assembled with CV boots, grease and the necessary fitting accessories for a straightforward replacement.

Is it difficult to replace a drive shaft on a Fiat 500 yourself?

It requires certain tools and mechanical experience, but thanks to the car's straightforward design, it is entirely manageable for a DIY mechanic.