Drive shafts for Fiat Marea Weekend

Looking for a model-specific drive shaft for your Fiat Marea Weekend? As a dedicated Swedish driveline specialist, we supply a meticulously selected range of drive shafts designed for...

Products for Drive shafts for Fiat Marea Weekend

22 products
1 - 22 of 22
Item no.:2109286
  • Position: Front right
  • Splines wheel side: 25
  • Total length: 498 mm
  • Joint diameter: 88 mm
  • Joint diameter, gearbox side: 100 mm
Item no.:113844
  • Position: Front left
  • Splines wheel side: 25
  • Total length: 468 mm
  • Joint diameter: 89 mm
  • Flange diameter: 100 mm
Item no.:2171689
  • Position: Front right
  • Splines wheel side: 25
  • Total length: 488 mm
  • Joint diameter: 89 mm
  • Joint diameter, gearbox side: 100 mm
Item no.:315656
  • Position: Front
  • Splines wheel side: 25
  • Total length: 466 mm
  • Joint diameter: 90 mm
  • Joint diameter, gearbox side: 100 mm
Item no.:314029
  • Position: Front
  • Splines wheel side: 25
  • Total length: 466 mm
  • Joint diameter: 90 mm
  • ABS teeth: 44
Item no.:311475
  • Position: Front
  • Splines wheel side: 25
  • Total length: 470 mm
  • Joint diameter: 90 mm
  • Joint diameter, gearbox side: 100 mm
Item no.:310043
  • Position: Front
  • Splines wheel side: 25
  • Total length: 461 mm
  • Joint diameter: 98 mm
  • Joint diameter, gearbox side: 108 mm
Item no.:319592
  • Position: Front
  • Splines wheel side: 25
  • Total length: 461 mm
  • Joint diameter: 98 mm
  • ABS teeth: 44
Item no.:210203
  • Position: Front right
  • Splines wheel side: 25
  • Total length: 931 mm
  • Joint diameter: 84 mm
  • Tripod shaft diameter: 32 mm
Item no.:210924
  • Position: Front right
  • Splines wheel side: 25
  • Total length: 931 mm
  • Joint diameter: 84 mm
  • ABS teeth: 44
Item no.:111551
  • Position: Front left
  • Splines wheel side: 25
  • Total length: 598 mm
  • Joint diameter: 84 mm
  • Tripod shaft diameter: 32 mm
Item no.:1187555
  • Position: Front left
  • Splines wheel side: 25
  • Total length: 598 mm
  • Diameter 1: 84 mm
  • ABS teeth: 44
Item no.:319835
  • Position: Front
  • Splines wheel side: 25
  • Total length: 468 mm
  • Diameter 1: 90 mm
  • Diameter 2: 100 mm
Item no.:117385
  • Position: Front left
  • Splines wheel side: 25
  • Total length: 598 mm
  • Joint diameter: 83 mm
  • Diameter 1: 84 mm
Item no.:215236
  • Position: Front right
  • Splines wheel side: 25
  • Total length: 931 mm
  • Joint diameter: 83 mm
  • Diameter 1: 84 mm
Item no.:315303
  • Position: Front
  • Splines wheel side: 25
  • Total length: 470 mm
  • Joint diameter: 90 mm
  • ABS teeth: 44
Item no.:1123822
  • Position: Front left
  • Splines wheel side: 25
  • Total length: 600 mm
  • Joint diameter: 81 mm
  • ABS teeth: 44
Item no.:2197973
  • Position: Front right
  • Splines wheel side: 25
  • Total length: 932 mm
  • Joint diameter: 81 mm
  • ABS teeth: 44
Item no.:1158910
  • Position: Front left
  • Splines wheel side: 25
  • Joint diameter: 81 mm
  • ABS teeth: 44
Item no.:2163993
  • Position: Front right
  • Splines wheel side: 25
  • Joint diameter: 81 mm
  • ABS teeth: 44
Item no.:1114566
  • Position: Front left
  • Splines wheel side: 25
  • Joint diameter: 81 mm
Item no.:2113927
  • Position: Front right
  • Splines wheel side: 25
  • Joint diameter: 81 mm

Drive shafts for Fiat Marea Weekend

The Fiat Marea Weekend is a versatile estate that requires dependable components to cope with daily driving and heavier loads alike. The drive shaft is a vital link in your car's drivetrain, and you will find an extensive selection engineered specifically for this model right here. We cater for most variants of the Marea Weekend, covering everything from the nimble smaller petrol engines to the high-torque JTD diesels. Choosing the correct drive shaft is critical for both safety and driving comfort, as a faulty or worn shaft can trigger serious mechanical issues. We ensure you get a replacement that matches original specifications to preserve your vehicle's performance and long-term durability.

Our range of drive shafts is thoroughly tested to withstand the demanding conditions of European roads and climates. For a car such as the Fiat Marea Weekend, frequently used as a family vehicle or workhorse, keeping the driveline in first-class condition is essential. A new drive shaft from us restores your car's balance and eliminates the vibrations that typically develop as original shafts wear out. We combine technical expertise with a well-stocked warehouse to supply the ideal solution for your car.

What does a drive shaft do on a Fiat Marea Weekend?

The drive shaft on a Fiat Marea Weekend transfers engine torque from the gearbox directly to the driven front wheels. Because the Marea Weekend is front-wheel drive, the driveshafts endure substantial stress, especially under hard acceleration and sharp cornering. Each shaft consists of a sturdy steel bar fitted with two joints: an inner CV joint connecting to the gearbox and an outer CV joint mounted at the wheel hub. These joints allow the wheels to move with the suspension travel and turn with the steering, delivering continuous, uninterrupted power.

Without an operational drive shaft, your car will not move, as engine power cannot reach the tarmac. It is truly one of the most vital components in your drivetrain. On the Fiat Marea Weekend, the setup is optimised for balanced power delivery, yet the moving parts within the joints naturally wear over time. Understanding how your driveshafts work makes it easier to spot early warning signs and replace them before a complete breakdown occurs. A healthy drive shaft ensures reliable propulsion while maintaining vehicle stability and fuel economy.

Common signs of wear

Several clear symptoms indicate that a drive shaft on your Fiat Marea Weekend is failing. One of the most frequent is a distinct clicking or knocking noise when negotiating sharp turns at low speeds, such as during parking manoeuvres. This almost always points to a worn outer CV joint struggling with articulation angles. If you instead experience persistent vibrations through the steering wheel or bodywork during acceleration, a worn inner joint is often the culprit, typically caused by internal play or worn needle bearings.

Another telltale sign is grease splattered across the inside of the wheel rim or wheel arch. This almost certainly indicates a split CV boot. When a boot tears, dirt and moisture enter while lubricating grease escapes, quickly ruining the joint's internal surfaces. Should you notice the car pulling to one side under throttle or hear a humming, grinding noise at higher speeds, inspect your drive shafts immediately. Ignoring these symptoms can cause the shaft or joint to shear completely, leaving you stranded.

Choosing the right drive shaft

Selecting the correct drive shafts for your Fiat Marea Weekend can be tricky, as dimensions vary depending on engine size, gearbox type and production year. Key differences include overall length, spline count and whether the car is equipped with ABS. For example, a 2.4 JTD typically uses sturdier shafts than a 1.6 16V model. To ensure you purchase the correct part, use our search tool to filter by your car's make, model and engine variant, showing only the components that match your specific vehicle.

Always verify whether you need the left-hand or right-hand side, as drive shafts on the Marea differ in length due to the transverse gearbox position. It is also wise to check the spline count on your existing shaft where possible, particularly if your car falls around a mid-generation model revision. Our customer service team is on hand if you require any assistance confirming specifications. We will help you select the exact part right away, keeping garage downtime to a minimum.

Related parts to inspect

We recommend checking these exact pages for your vehicle when replacing a drive shaft:

When one drivetrain component wears out, related components on the same vehicle often require attention too. By checking these exact pages for the Fiat Marea Weekend, you can easily determine whether an issue lies with the drive shaft itself or another part of the driveline.

This is especially true on models where vibrations, play and strange noises can transfer between multiple drivetrain components. A quick look at related categories reduces the risk of replacing the main shaft while overlooking an adjacent worn part causing the very same symptom.

Inspecting these components simultaneously saves both time and money in the long run. Because the suspension and hub assembly must be dismantled during a drive shaft replacement, the additional labour to fit a fresh CV boot or a new ABS reluctor ring is minimal compared to repeating the entire job later. A comprehensive driveline check ensures your car remains safe, solid and dependable for many thousands of kilometres to come.

Why shop with CVJoint24?

CVJoint24 is the international shop of a Swedish driveline specialist, supplying premium driveline and power-transmission components across Europe. We know how crucial it is to get the correct part for your Fiat Marea Weekend on the first try, which is why we offer a comprehensive fitment guarantee on our products. Combining an extensive inventory with technical expertise, we provide high-quality spare parts at competitive prices. When a drive shaft fails, we know you need a dependable replacement promptly to get back on the road.

Operating from our central warehouse in Helsingborg, Sweden, our efficient logistics ensure quick dispatch to destinations across the EU. Shopping with us means acquiring quality parts backed by genuine driveline specialists. We make ordering straightforward: choose your car's make, model and engine, order your part, and receive it promptly at your doorstep or garage. Your Fiat deserves dependable quality, and we are here to provide it.

Frequently Asked Questions about Drive Shafts for Fiat Marea Weekend

How do I know if my Fiat Marea Weekend needs a new drive shaft?

The most common signs are clicking noises when cornering, vibrations under acceleration, or visible grease leaks from split CV boots. If the vibrations are severe, the shaft should be inspected immediately.

Can I replace just the CV joint instead of the entire shaft?

Yes, if the shaft bar itself is straight and undamaged, you can often save money by simply replacing the outer or inner CV joint. We supply both complete shafts and individual joints.

Does the same drive shaft fit both the right and left sides?

Usually not. On the Fiat Marea Weekend, the right and left drive shafts are typically different lengths due to the asymmetrical positioning of the gearbox. Always check the specification for the respective side.

What happens if I continue driving with a broken drive shaft?

A damaged drive shaft can eventually snap entirely, leaving the car with no drive. In the worst case, a broken shaft can flail and damage surrounding components such as the gearbox or suspension.

Is an ABS ring included when I buy a complete drive shaft for the Marea Weekend?

It depends on the specific item. Many of our complete drive shafts come with a pre-fitted ABS ring, but always check the product description or filter by your car's details to make sure.

How do I find the correct drive shaft for my vehicle?

Select your make, model and engine in our search selector at the top of the page. The system will then filter and display the drive shafts that are technically correct for your exact Fiat Marea Weekend.