Outer CV joints for Fiat Marea Weekend

When your estate's drive shaft requires attention, choosing the right outer CV joint is essential for reliable roadholding. Here you will find a curated selection for every engine...

Products for Outer CV joints for Fiat Marea Weekend

13 products
1 - 13 of 13
Item no.:7299718
  • Position: Front, Outer
  • Inner splines: 25
  • Seal diameter: 52 mm
  • Outer splines: 25
  • ABS teeth: 44
Item no.:0577931
  • Position: Outer
  • Inner splines: 22
  • Seal diameter: 51 mm
  • Outer splines: 25
  • Thread size: M24X1,5
Item no.:0543542
  • Position: Outer
  • Inner splines: 22
  • Splines wheel side: 25
  • Seal diameter: 52 mm
  • Outer splines: 25
Item no.:0528602
  • Position: Outer
  • Inner splines: 22
  • Splines wheel side: 25
  • Seal diameter: 52 mm
  • ABS teeth: 44
Item no.:7299724
  • Position: Front, Outer
  • Inner splines: 25
  • Seal diameter: 59 mm
  • Outer splines: 25
  • ABS teeth: 44
Item no.:3531462
  • Position: Outer
  • Inner splines: 25
  • Seal diameter: 52 mm
  • Outer splines: 25
  • Thread size: M24X1,5
Item no.:351276
  • Position: Outer
  • Inner splines: 28
  • Seal diameter: 59 mm
  • Outer splines: 25
  • Thread size: M24 x 1,5
Item no.:355685
  • Position: Outer
  • Inner splines: 20
  • Seal diameter: 46 mm
  • Outer splines: 22
  • Thread size: M22X1,5
Item no.:354357
  • Position: Outer
  • Inner splines: 20
  • Splines wheel side: 22
  • Seal diameter: 46 mm
  • ABS teeth: 44
Item no.:0561720
  • Position: Outer
  • Inner splines: 25
  • Splines wheel side: 25
  • Seal diameter: 59 mm
  • ABS teeth: 44
Item no.:3540117
  • Position: Outer
  • Inner splines: 28
  • Seal diameter: 56 mm
  • Outer splines: 25
  • Joint diameter: 97,7 mm
Item no.:350827
  • Position: Outer
  • Inner splines: 28
  • Splines wheel side: 25
  • Seal diameter: 56 mm
  • ABS teeth: 44
Item no.:154692
  • Position: Front, Outer
  • Inner splines: 22
  • Splines wheel side: 22
  • Seal diameter: 51 mm
  • Thread size: M22X1,5

Outer CV joints for Fiat Marea Weekend

The outer CV joint is one of the most heavily stressed components on your Fiat Marea Weekend, especially as this model is often used as a reliable workhorse for heavy loads and long journeys. As a spacious estate, the Marea Weekend demands seamless power transfer under varying conditions. Choosing the right spare part is vital for maintaining vehicle reliability and preventing inconvenient breakdowns. At CVJoint24, you will find a curated selection of outer CV joints engineered specifically to match the technical specifications of your Fiat, regardless of engine variant or model year. Our range covers most versions of this classic estate.

What does an outer CV joint do on the Fiat Marea Weekend?

What does the outer CV joint actually do on a Fiat Marea Weekend? Its primary function is to serve as a flexible link between the drive shaft and the road wheel. Because the front wheels must both drive the car forward and steer it, the joint must cope with sharp operating angles without losing contact or creating excess friction. Inside the constant velocity joint, precision-machined steel balls and a ball cage run in special grease, shielded by a rubber boot. This design enables your Fiat to maintain constant wheel speed even on full steering lock, which is fundamental to the car's roadholding and manoeuvrability in city traffic and tight parking spaces.

Common signs of wear

There are several distinct signs that the outer CV joint on your Fiat Marea Weekend is failing. The most familiar symptom is a clicking or knocking noise heard when turning sharply at low speeds. If the sound disappears when driving straight ahead, the outer joint is almost certainly the culprit. Other symptoms include vibrations through the steering wheel under acceleration, or grease splattered over the wheel rim or the ground where you parked. This grease escapes through a split CV boot, and once it is gone, dirt and moisture quickly destroy the internal components of the joint, resulting in costly failure.

How to choose the correct outer CV joint

Finding the right replacement part can feel challenging, but selecting the correct outer CV joint for your Fiat Marea Weekend comes down to a few critical measurements. You will need to check the number of outer and inner splines—the teeth that secure the joint into the hub and onto the shaft. It is also essential to know whether your car has ABS brakes, as the joint must then feature an ABS ring for the wheel speed sensor. To make the process simple, select your Fiat Marea Weekend by make, model and engine variant in our store. This is the most reliable way to guarantee a component with the exact dimensions and specifications for your car.

Related parts to check

It is also worth checking these relevant category pages for the same vehicle when working on the outer CV joint:

When one drivetrain component shows signs of wear, nearby parts on the vehicle often require inspection as well. Comparing these exact pages for the Fiat Marea Weekend makes it easier to establish whether the problem lies solely with the outer CV joint or involves another nearby section of the drivetrain.

This is especially important on models where vibrations, play and unwanted noises can transfer symptoms across several driveline components. A quick look through related categories minimises the risk of replacing the correct component type while overlooking an adjacent part that contributes to the same issue.

Why buy from CVJoint24?

Why should you choose CVJoint24 for your car parts? We are the international shop of a Swedish driveline specialist, focusing entirely on drive shafts and power transmission components. That means we have a far deeper technical understanding of parts like CV joints than a general car parts retailer. We also know that demanding European roads and harsh winter conditions place high demands on material quality and seals. Shopping with us gives you access to specialised expertise, high-grade products and knowledgeable customer service. We help keep your Fiat Marea Weekend on the road with components that deliver an exact fit and long service life, delivered directly from our warehouse in Helsingborg, Sweden across the EU.

Frequently asked questions about outer CV joints for Fiat Marea Weekend

How do I know if my Fiat Marea Weekend needs a new outer CV joint?

The most common sign is a clicking noise when turning on full lock while driving. If the sound disappears when driving straight ahead, it is usually the outer joint that is worn.

Can I replace just the boot instead of the entire CV joint?

Yes, if you catch damage to the CV boot early before dirt has entered and damaged the joint itself, it is often sufficient to replace the boot and repack it with fresh grease.

Do I need to know the number of teeth on the ABS ring?

Yes, if your Fiat Marea Weekend has ABS, it is essential that the new CV joint has a ring with the exact same tooth count to ensure the ABS functions correctly.

Is it difficult to replace the outer CV joint yourself on a Marea Weekend?

It requires certain tools and mechanical experience, as the wheel hub and parts of the suspension must be dismantled. For an experienced DIY mechanic, however, it is a perfectly manageable job.

Why is it important to select the exact vehicle details when searching?

The Fiat Marea Weekend was manufactured with several different engines and gearboxes, meaning drive shafts and CV joints can vary in dimensions and spline counts. Selecting your exact make, model and engine ensures the correct fit.