Drive shafts for Fiat Ulysse

Find the right drive shaft for your Fiat Ulysse, whether you maintain an early 1990s model or a later generation up to 2011. With a comprehensive selection covering both petrol and...

Products for Drive shafts for Fiat Ulysse

27 products
25 - 27 of 27
Item no.:7315744
  • Position: Front right
  • Splines gearbox side: 37
  • Splines wheel side: 27
  • Total length: 955 mm
  • Joint diameter: 100 mm
Item no.:1153951
  • Position: Front left
  • Splines gearbox side: 37
  • Splines wheel side: 27
  • Total length: 630 mm
  • ABS teeth: 48
Item no.:211435
  • Splines gearbox side: 37
  • Splines wheel side: 27
  • Total length: 970 mm
  • Joint diameter: 100 mm
  • Joint diameter, gearbox side: 89 mm
Showing 25–27 of 27 products

Drive shafts for Fiat Ulysse

The Fiat Ulysse is a versatile vehicle that places demanding requirements on its drivetrain, especially when carrying a full load of passengers or luggage. A drive shaft for Fiat Ulysse is a critical component that must withstand heavy stress over long periods in varied driving conditions. At CVJoint24, we specialise in these precise parts so we can supply options that match original specifications down to the finest detail. With our extensive range, you ensure that your vehicle maintains its roadworthiness, safety and drivability. You should never compromise on drive shaft quality, as a defective shaft can leave you stranded by the roadside. Choosing the correct replacement from the outset saves both time and money in the long run.

What does the drive shaft do on a Fiat Ulysse?

The drive shaft on a Fiat Ulysse transfers engine torque from the gearbox directly to the driven front wheels. Because the Ulysse is front-wheel drive, the driveshafts must not only deliver propulsion but also compensate for front suspension travel and the steering angles of the wheels during cornering. This flexible movement is enabled by the inner and outer CV joints fitted at either end of the shaft. A smooth, properly functioning drive shaft is essential for quiet, vibration-free travel, which is vital in a family minibus where passenger comfort is paramount. Without an intact shaft, engine torque cannot reach the road efficiently, degrading overall performance and fuel economy.

Common signs of wear and failure

Several clear symptoms indicate that a drive shaft on your Fiat Ulysse is failing or badly worn. One of the most typical signs is a rhythmic knocking or clicking noise when turning on full lock under acceleration. This symptom usually points to a worn or damaged outer CV joint. If you instead experience severe vibrations through the steering wheel or the car's floorpan during acceleration, the inner CV joint is frequently the cause. Another early warning sign is grease splattered over the inside of the wheel rim or wheel arch lining, typically caused by a split CV boot. Once the boot fails, road dirt enters while protective grease escapes, rapidly destroying the shaft's internal bearings.

How to choose the correct drive shaft

Selecting the right drive shaft for Fiat Ulysse requires care, as configurations vary depending on the engine, gearbox type and model year. The most critical checks are the spline counts (number of teeth) on both the wheel and gearbox sides, alongside the overall compressed length of the shaft. Certain variants also feature an integrated ABS ring, which must match your vehicle's braking system to avoid dashboard warning lights. To make finding the correct part as straightforward as possible, we recommend selecting your exact make, model and engine variant in our vehicle selector. Cross-checking these technical measurements with your existing unit guarantees complete peace of mind before fitting.

Related parts to inspect

We recommend checking these exact pages for the same vehicle when working on your drive shaft:

When one drivetrain component shows signs of wear, adjacent parts on the vehicle often require close inspection too. By checking these related Fiat Ulysse categories, it becomes easier to identify whether an issue lies with the drive shaft itself or with another component in the power transmission system.

This is particularly important on models where vibrations, play and strange noises can travel across multiple components in the drivetrain. A quick check of associated categories prevents the frustration of replacing the correct component type while overlooking an adjoining worn part that causes identical symptoms.

Taking a complete overview of your front axle components ensures your vehicle remains reliable for many thousands of kilometres without surprise breakdowns.

Why buy from CVJoint24?

CVJoint24 is the international shop of a Swedish driveline specialist shipping across the EU from our central warehouse in Helsingborg, Sweden. We combine in-depth technical expertise with a vast inventory of premium driveline replacement parts. When you shop with us, you benefit from focused expertise that general car-parts factors simply cannot match. We appreciate the importance of an exact fit, which is why we provide an accurate vehicle selector by make, model and engine to eliminate ordering errors. With our focus on reliable parts and dependable engineering at competitive prices, we are the trusted choice for your Fiat Ulysse. Rely on our passion for drivelines for high-grade products and knowledgeable customer support.

Frequently asked questions about drive shafts for Fiat Ulysse

How do I know if the drive shaft on my Fiat Ulysse is failing?

Common signs include clicking noises when taking sharp turns or vibrations throughout the car under acceleration. Grease leaking from a torn CV boot is also a clear indication.

Can I replace just the CV joint instead of the entire drive shaft?

Yes, provided the shaft itself is undamaged, you can often replace the outer or inner CV joint separately, which can be a more cost-effective option.

Do all drive shafts fit every Fiat Ulysse model?

No, specifications vary depending on the engine (such as JTD diesel or petrol) and whether the car has a manual or automatic gearbox. Select your vehicle's make, model and engine to find the correct match.

Why is it important that the drive shaft boot remains intact?

The CV boot protects the CV joint from dirt, grit and water while keeping the lubricating grease inside. A split boot quickly leads to premature joint wear and failure.

Do I need to carry out wheel alignment after replacing a drive shaft?

It is often recommended, as replacing a driveshaft involves loosening front suspension components that can alter wheel alignment angles, potentially causing uneven tyre wear.