Drive shafts for Ford Courier

Need a replacement drive shaft for your Ford Courier? As driveline specialists, we supply a comprehensive range of complete drive shafts tailored specifically to your vehicle's...

Products for Drive shafts for Ford Courier

15 products
1 - 15 of 15
Item no.:0100412
  • Inner splines: 22
  • Outer splines: 23
  • Seal ring diameter: 40 mm
Item no.:2113320
  • Position: Front right
  • Splines gearbox side: 23
  • Splines wheel side: 25
  • Total length: 900 mm
  • Joint diameter: 81 mm
Item no.:115058
  • Position: Front left
  • Splines gearbox side: 23
  • Splines wheel side: 25
  • Total length: 604 mm
  • Joint diameter: 87 mm
Item no.:212184
  • Position: Front right
  • Splines gearbox side: 25
  • Splines wheel side: 25
  • Total length: 812 mm
  • Joint diameter: 81 mm
Item no.:211963
  • Position: Front right
  • Splines gearbox side: 23
  • Splines wheel side: 25
  • Total length: 865 mm
  • Diameter 1: 81 mm
Item no.:2129805
  • Position: Front right
  • Splines gearbox side: 23
  • Splines wheel side: 25
  • Total length: 865 mm
  • ABS teeth: 56
Item no.:118117
  • Position: Front left
  • Splines gearbox side: 23
  • Splines wheel side: 25
  • Total length: 590 mm
  • Diameter 1: 81 mm
Item no.:1130073
  • Position: Front left
  • Splines gearbox side: 23
  • Splines wheel side: 25
  • Total length: 590 mm
  • ABS teeth: 56
Item no.:116579
  • Position: Front left
  • Splines gearbox side: 23
  • Splines wheel side: 23
  • Total length: 583 mm
  • Joint diameter: 84 mm
Item no.:117706
  • Position: Front left
  • Splines gearbox side: 23
  • Splines wheel side: 23
  • Total length: 585 mm
  • ABS teeth: 56
Item no.:211182
  • Position: Front right
  • Splines gearbox side: 23
  • Splines wheel side: 23
  • Total length: 861 mm
  • Joint diameter: 84 mm
Item no.:214468
  • Position: Front right
  • Splines gearbox side: 23
  • Splines wheel side: 23
  • Total length: 861 mm
  • ABS teeth: 56
Item no.:2136738
  • Position: Front right
  • Splines gearbox side: 23
  • Splines wheel side: 25
  • Total length: 865 mm
  • Joint diameter: 81 mm
Item no.:1143636
  • Position: Front left
  • Splines gearbox side: 23
  • Splines wheel side: 25
  • Total length: 590 mm
  • ABS teeth: 56
Item no.:2158951
  • Position: Front right
  • Splines gearbox side: 23
  • Splines wheel side: 25
  • Total length: 865 mm
  • ABS teeth: 56

Drive shafts for Ford Courier

The Ford Courier is a dependable workhorse often used in demanding urban conditions and for light commercial deliveries. This type of use places heavy demands on the car's drivetrain, and in particular on its drive shafts. A drive shaft for Ford Courier must withstand constant torque and frequent stop-start cycles without compromising on durability. We supply a range of products carefully selected to match the exact technical specifications of your vehicle. By choosing a model-specific component, you ensure that power transmission remains efficient and that the vehicle retains its driving dynamics for years to come. Our focus is on offering parts that meet or exceed original equipment standards, which is vital for a commercial vehicle in daily service.

What does a drive shaft do on a Ford Courier?

The drive shaft plays a pivotal role in your Ford Courier by transferring rotational power from the gearbox directly to the driven wheels. On a front-wheel-drive vehicle like the Courier, drive shafts are complex units that must rotate whilst also accommodating vertical suspension travel and steering angles. This is achieved through integrated CV joints fitted at each end of the shaft. The inner joint mounts to the gearbox and primarily absorbs the plunging movements caused by suspension compression and rebound. The outer joint sits at the wheel hub and is designed to cope with the steep angles created during sharp turns. Without an operational drive shaft, engine power cannot reach the road, making it one of the most critical components in your car's drivetrain.

Common signs of wear

Spotting drive shaft issues early can save you money and prevent breakdown delays on the road. One of the clearest indications of a worn outer CV joint is a rhythmic clicking or knocking noise, noticeable when making tight turns at low speeds. If you instead experience vibrations through the steering wheel or bodywork under acceleration, this often points to play or wear in the inner CV joint. Another vital warning sign is torn or split CV boots, the flexible rubber covers protecting the joints. When a boot tears, lubricating grease escapes whilst road grit and water penetrate, causing rapid premature wear of the constant velocity joint. Regular inspection of these components is crucial to prolong the service life of your Ford Courier.

How to choose the correct drive shaft

When replacing a drive shaft on your Ford Courier, precision is essential for a straightforward repair. Several technical specifications can vary between model years and engine variants. Most importantly, check the spline tooth count on both the gearbox side and the wheel hub side. You must also establish whether your car has ABS, as the drive shaft may feature an integrated ABS ring with a specific tooth count. The overall length of the driveshaft is another critical factor that must match the original component exactly. To make selection straightforward, simply choose your Ford Courier's model year and engine variant in our store to find parts guaranteed to fit your vehicle.

Related parts to inspect

Please also check these related categories for your vehicle when replacing a drive shaft:

When one drivetrain component wears out, surrounding parts often warrant an inspection as well. Checking these related pages for Ford Courier makes it simpler to determine whether a fault lies with the drive shaft itself or with an adjacent part of the transmission.

This is especially helpful on models where vibrations, play and unusual noises can easily be transmitted between interconnected drivetrain components. A quick look at related categories reduces the risk of replacing one part while overlooking another that contributes to the very same issue.

By reviewing the complete assembly, you minimise the risk of having to carry out repetitive repairs in the near future.

Why buy from CVJoint24?

CVJoint24 is the international shop of a Swedish driveline specialist, supplying quality car parts across the EU from our central warehouse in Helsingborg, Sweden. We combine in-depth technical expertise with a strictly vetted range of high-quality products, making us the natural choice for both DIY mechanics and independent garages. When you order from us, you receive high-grade spare parts backed by our fitment accuracy. We understand how important your Ford Courier is to your daily business, which is why we prioritise prompt dispatch to get you back on the road without delay. Choose an expert that understands driveline engineering inside out – choose CVJoint24 for your replacement drive shafts.

Frequently asked questions about drive shafts for Ford Courier

How do I know if my Ford Courier needs a new drive shaft?

The most common symptoms are clicking noises when turning, vibrations under acceleration, or visible grease leaks from split CV boots. If the vibrations are severe, the shaft should be inspected immediately.

Can I replace just a CV joint instead of the entire drive shaft?

Yes, if the shaft bar itself is undamaged, you can often replace just the inner or outer CV joint. This is often a cost-effective option if the wear is limited to a specific component.

Is there a difference between the right and left drive shaft on a Ford Courier?

Yes, in most cases the right and left sides are different lengths and sometimes feature different fittings. It is therefore very important to check which side the part is intended for before ordering.

What happens if I continue driving with a broken drive shaft?

In the worst-case scenario, a damaged drive shaft can snap completely, causing the vehicle to lose all drive. It can also cause secondary damage to the gearbox, wheel bearings, and suspension.

How do I find the correct specifications for my Courier?

The easiest way is to select your car's make, model, and engine variant on our site. This matches your vehicle's technical data to our range to ensure the correct spline count and shaft length.

Are CV boots and fitting accessories included when I buy a complete drive shaft?

Yes, when you buy a complete drive shaft from us, it comes fully assembled with inner and outer joints, CV boots, grease, and the necessary fitting accessories for a straightforward replacement.