Drive shafts for Opel Calibra A

Looking for a high-quality drive shaft for your Opel Calibra A? As the international shop of a Swedish driveline specialist, we offer an expert selection of parts for this classic sports...

Products for Drive shafts for Opel Calibra A

14 products
1 - 14 of 14
Item no.:1178893
  • Position: Front left
  • Splines gearbox side: 34
  • Splines wheel side: 33
  • Total length: 592 mm
  • ABS teeth: 29
Item no.:2108076
  • Position: Front right
  • Splines gearbox side: 34
  • Splines wheel side: 33
  • Total length: 938 mm
  • ABS teeth: 29
Item no.:7314805
  • Position: Front right
  • Splines gearbox side: 34
  • Splines wheel side: 33
  • Total length: 938 mm
  • Joint diameter: 90 mm
Item no.:7314806
  • Position: Front right
  • Splines gearbox side: 34
  • Splines wheel side: 33
  • Total length: 940 mm
  • ABS teeth: 43
Item no.:211783
  • Position: Front right
  • Splines gearbox side: 34
  • Splines wheel side: 33
  • Total length: 654 mm
  • ABS teeth: 29
Item no.:116441
  • Position: Front left
  • Splines gearbox side: 34
  • Splines wheel side: 33
  • Total length: 590 mm
  • ABS teeth: 43
Item no.:1141646
  • Position: Front left
  • Splines gearbox side: 34
  • Splines wheel side: 33
  • Total length: 590 mm
  • Joint diameter: 90 mm
Item no.:7315823
  • Position: Front left
  • Splines gearbox side: 34
  • Splines wheel side: 33
  • Total length: 590 mm
  • ABS teeth: 29
Item no.:2123334
  • Position: Front right
  • Splines gearbox side: 34
  • Splines wheel side: 33
  • Total length: 653 mm
  • Joint diameter: 90 mm
Item no.:2181004
  • Position: Front right
  • Splines gearbox side: 34
  • Splines wheel side: 33
  • Total length: 653 mm
  • Diameter 1: 90 mm
Item no.:217889
  • Position: Front right
  • Splines gearbox side: 34
  • Splines wheel side: 33
  • Total length: 653 mm
  • ABS teeth: 43
Item no.:613722
  • Position: Rear
  • Total length: 603 mm
  • ABS teeth: 29
Item no.:617367
  • Position: Rear
  • Total length: 603 mm
Item no.:619216
  • Position: Rear
  • Total length: 603 mm
  • ABS teeth: 43

Drive shafts for Opel Calibra A

The Opel Calibra A is an iconic model that set a new benchmark for aerodynamics and sporty design for Opel upon its release. To preserve the sharp handling and performance that define this modern classic, a fully functioning drivetrain is vital. A drive shaft for Opel Calibra A is exposed to significant torque, especially in more powerful engine configurations such as the 16V, V6 and Turbo. Whether your car is front-wheel drive or fitted with the advanced four-wheel-drive system (4x4), precision-fit components are essential to avoid vibrations and unnecessary wear on the gearbox. At CVJoint24, we understand the importance of retaining the original driving feel, which is why we only supply parts that meet exacting quality standards. By investing in a tailored shaft, you ensure that power delivery remains smooth and efficient, prolonging the lifespan of the entire vehicle.

What does a drive shaft do on an Opel Calibra A?

The primary function of the drive shaft on an Opel Calibra A is to act as the mechanical link transferring engine torque from the gearbox directly to the wheel hubs. It is this component that turns power into propulsion on the tarmac. On the Calibra, the setup typically uses two shafts of unequal length to accommodate the offset gearbox position. Each driveshaft is equipped with an inner CV joint that allows axial movement as the suspension articulates, and an outer CV joint that enables steering while delivering power. This intricate assembly must work in perfect harmony. If the shaft bends or the joints wear, it affects not only ride comfort but also your car’s ability to accelerate and corner safely. Robust construction is vital to handle the torque output generated by the Calibra engine range.

Common signs of wear

Catching drive shaft wear early can save you from expensive secondary damage. One of the most common signs of a failing drive shaft on an Opel Calibra A is vibration that occurs specifically under acceleration. These vibrations can be felt through the cabin floor or seats and often point to play developing in the inner joint. Another telltale symptom is a rhythmic clicking or knocking noise when cornering on full steering lock at low speeds, which almost invariably indicates a worn outer constant velocity joint. You should also inspect the boots regularly. Grease splattered across the inner wheel rim or wheel arch lining points to a split CV boot. Once the grease escapes and dirt enters, wear accelerates dramatically. If the car pulls to one side or feels unstable under load, this can also suggest that shaft integrity is compromised.

How to choose the correct drive shaft

Navigating replacement car parts can be challenging, particularly for the Opel Calibra A where specifications vary considerably across variants. Our range includes several options covering the distinct requirements of this model series. Variations between shafts often include the number of splines or teeth on the ABS ring, total shaft length and joint dimensions. The differences between a standard 2.0i and the potent Turbo 4x4 model are substantial. To ensure you select the correct part straight away, simply choose your vehicle’s make, model and engine from our selector. This is the most reliable way to match your car's technical profile to the right component. We have taken care of the cataloguing so you can be confident that the Opel Calibra A spare parts you order will fit properly without modification.

Related parts to inspect

Be sure to check these dedicated pages for the same vehicle when working on the drive shaft:

When one drivetrain component shows signs of wear, related items on the vehicle frequently require attention too. Comparing these dedicated pages for the Opel Calibra A makes it easier to establish whether the problem lies with the drive shaft itself or another neighbouring part of the driveline.

This is especially important on models where vibrations, play and knocking sounds can travel across different sections of the driveline. Reviewing related categories helps avoid replacing one item while overlooking an adjacent component that contributes to the same symptom.

Replacing a drive shaft provides an ideal opportunity to carry out a comprehensive inspection of the front suspension and drivetrain. Often, adjacent parts may also be nearing the end of their service life. We suggest checking the following components to ensure a thorough repair:

  • Outer CV joints for Opel Calibra A: If the shaft itself remains straight and sound, renewing only the CV joint may suffice.
  • Inner CV joints for Opel Calibra A: Frequently the root cause of shuddering felt through the seats during acceleration.
  • Propeller shaft centre bearings for Opel Calibra A: Fitted to the longer intermediate setup to prevent whipping at higher shaft speeds.
  • CV boots for Opel Calibra A: Cost-effective protection that shields your newly fitted components from road grit.
  • ABS rings for Opel Calibra A: Check for cracks or heavy corrosion that could trigger fault codes in the braking system.
Taking a proactive approach and renewing worn adjacent parts simultaneously saves both time and labour down the line, avoiding repeated strip-downs.

Why buy from CVJoint24?

CVJoint24 is not just another general car parts outlet; we are the international shop of a Swedish driveline specialist, operating with an exclusive focus on driveline and power transmission components from our central warehouse in Helsingborg, Sweden. When ordering a drive shaft for your Opel Calibra A from us, you benefit from specialist expertise and an extensive category range. We understand that getting back on the road matters, which is why we offer fast dispatch across the EU on all stocked parts. By selecting your make, model and engine, you can be sure of getting the exact fit straight away. We strive to provide the right parts at competitive prices without ever cutting corners on quality. As our customer, you receive components engineered and tested to cope with challenging European road conditions and the demands of modern driving.

Frequently asked questions about drive shafts for Opel Calibra A

How do I know which drive shaft fits my Opel Calibra A?

The most reliable way is to select your car's specific make, model and engine variant. This filters out the drive shafts that match your car's exact engine, gearbox and drive system.

What are the most common symptoms of a worn drive shaft?

The clearest signs are vibrations through the car body under acceleration, as well as clicking noises from the front end when turning sharply at low speed.

Are CV joints included when I buy a complete drive shaft?

Yes, our complete drive shafts are delivered fully assembled with both inner and outer CV joints, as well as protective CV boots for straightforward installation.

Is there a difference between drive shafts for front-wheel drive and 4x4 models?

Yes, four-wheel-drive Opel Calibra A models often have unique specifications for their shafts. Always make sure the part is intended specifically for the 4x4 system.

Why is it important to check the CV boots?

A split CV boot allows lubricating grease to escape and dirt to enter, which quickly causes the CV joints to wear out and leads to driveshaft failure.

Do you offer a fitment guarantee on drive shafts for Opel?

Yes, we offer a comprehensive fitment guarantee when you choose your specific vehicle details, ensuring you receive the correct part for your car.