Drive shafts for Peugeot 2008

Need a replacement drive shaft for your Peugeot 2008? As an international driveline specialist shipping across the EU from Sweden, CVJoint24 offers an extensive selection of premium...

Products for Drive shafts for Peugeot 2008

22 products
1 - 22 of 22
Item no.:1128046
  • Position: Front left
  • Splines gearbox side: 24
  • Splines wheel side: 25
  • Total length: 635 mm
  • Joint diameter: 86 mm
Item no.:1122172
  • Position: Front left
  • Splines gearbox side: 26
  • Splines wheel side: 25
  • Total length: 621 mm
  • Joint diameter: 79 mm
Item no.:2137290
  • Position: Front right
  • Splines gearbox side: 26
  • Splines wheel side: 25
  • Total length: 766 mm
  • Joint diameter: 79 mm
Item no.:2172801
  • Splines gearbox side: 22
  • Splines wheel side: 21
  • Total length: 852 mm
  • Joint diameter: 75 mm
  • Joint diameter, gearbox side: 70 mm
Item no.:2184675
  • Position: Front right
  • Splines gearbox side: 22
  • Splines wheel side: 21
  • Total length: 870 mm
  • Joint diameter: 86 mm
Item no.:1196238
  • Splines gearbox side: 22
  • Splines wheel side: 21
  • Total length: 655 mm
  • Joint diameter: 86 mm
  • Joint diameter, gearbox side: 75 mm
Item no.:2241613
  • Position: Front right
  • Splines gearbox side: 24
  • Splines wheel side: 25
  • Total length: 910 mm
Item no.:2111160
  • Position: Front right
  • Splines gearbox side: 37
  • Splines wheel side: 25
  • Total length: 903 mm
Item no.:2122288
  • Position: Front right
  • Splines gearbox side: 24
  • Splines wheel side: 25
  • Total length: 862 mm
  • Joint diameter: 86 mm
Item no.:1116477
  • Position: Front left
  • Splines gearbox side: 37
  • Splines wheel side: 25
  • Total length: 598 mm
  • Joint diameter: 86 mm
Item no.:213715
  • Position: Front right
  • Splines gearbox side: 24
  • Splines wheel side: 25
  • Total length: 900 mm
  • Diameter 1: 77 mm
Item no.:117327
  • Position: Front left
  • Splines gearbox side: 24
  • Splines wheel side: 25
  • Total length: 677 mm
  • Joint diameter: 77 mm
Item no.:2120285
  • Position: Front right
  • Splines gearbox side: 24
  • Splines wheel side: 25
  • Total length: 880 mm
  • Joint diameter: 85 mm
Item no.:1169321
  • Position: Front left
  • Splines gearbox side: 37
  • Splines wheel side: 25
  • Total length: 643 mm
  • Diameter 1: 85 mm
Item no.:2199937
  • Position: Front right
  • Splines gearbox side: 24
  • Splines wheel side: 25
  • Total length: 940 mm
  • Joint diameter: 86 mm
Item no.:1180284
  • Position: Front left
  • Splines gearbox side: 24
  • Splines wheel side: 25
  • Total length: 670 mm
  • Thread size: M24x1.5
Item no.:7301034
  • Position: Front left
  • Splines gearbox side: 24
  • Splines wheel side: 25
  • Total length: 626 mm
  • Joint diameter: 86 mm
Item no.:119106
  • Position: Front left
  • Splines gearbox side: 37
  • Splines wheel side: 25
  • Total length: 642 mm
  • Diameter 1: 77 mm
Item no.:115512
  • Position: Front left
  • Splines gearbox side: 24
  • Splines wheel side: 25
  • Total length: 685 mm
Item no.:217014
  • Position: Front right
  • Splines gearbox side: 37
  • Splines wheel side: 25
  • Total length: 864 mm
  • Diameter 1: 86 mm
Item no.:212617
  • Position: Front right
  • Splines gearbox side: 37
  • Splines wheel side: 25
  • Diameter 1: 77 mm
Item no.:1159984
  • Position: Front left
  • Splines gearbox side: 24
  • Splines wheel side: 25
  • Total length: 642 mm
  • Joint diameter: 86 mm

Drive shafts for Peugeot 2008

The Peugeot 2008 is a popular compact SUV that demands mechanical precision to maintain its agility and ride comfort in city traffic as well as on the motorway. The drive shaft is a critical link in the vehicle's powertrain. When it is time for a replacement, choosing a part that accurately matches the original factory specifications is vital to avoid imbalance or premature wear. At CVJoint24, you will find a carefully selected range of drive shafts engineered for the various engines and model years of the Peugeot 2008. We stock parts that meet or exceed modern drivetrain requirements, ensuring your car retains its reliability and driving dynamics for many kilometres ahead. With an extensive inventory, we provide dependable solutions for virtually every variant of this model, whether petrol or diesel.

What does a drive shaft do on the Peugeot 2008?

The drive shaft on a Peugeot 2008 transfers the torque generated by the engine, via the gearbox, directly to the road wheels. This is what actually propels the vehicle forward. As the Peugeot 2008 is predominantly front-wheel drive, the front drive shafts bear substantial stress. They must cope with continuous torque transmission while accommodating tight steering angles and the constant vertical movement of the car's suspension. This articulation is made possible by sophisticated joints—the inner and outer CV joints—located at either end of the shaft. A well-engineered driveshaft minimises mechanical power losses and delivers smooth, controlled power to the road, which is fundamental to handling, vehicle stability and fuel economy. Without a functioning shaft the car cannot move, and a catastrophic break risks causing extensive collateral damage to the suspension assembly.

Common signs of wear

Several clear symptoms warn that a drive shaft on your Peugeot 2008 may be failing, and addressing them promptly helps avoid expensive repairs. One classic sign is a rhythmic clicking or knocking noise that is most noticeable when making sharp turns at low speeds, such as during parking manoeuvres. This noise typically indicates a worn or damaged outer CV joint. If you experience distinct vibrations through the steering wheel or chassis under acceleration, it often points to play inside the inner constant velocity joint closest to the gearbox. It is equally essential to inspect the drive shaft boots regularly. If these rubber boots split or come loose, the essential lubricating grease escapes while road grit, salt and water penetrate. This mixture acts as a grinding paste and can destroy an otherwise sound driveshaft in a very short time.

Choosing the correct drive shaft

Finding the right drive shaft for a Peugeot 2008 can initially seem challenging due to several technical variations. Specifications differ considerably depending on whether your car is powered by a 1.2 PureTech petrol engine or a torquey 1.6 BlueHDi diesel. The gearbox type—manual or automatic—also dictates the shaft's length and spline dimensions. Furthermore, the offside and nearside drive shafts are rarely identical; one side is usually longer and may feature an integrated centre bearing. To avoid manual measurements of splines and overall lengths, simply select your car's exact make, model and engine variant in our store. This filters our catalogue directly to the parts engineered for your specific Peugeot 2008, ensuring an accurate fit and eliminating the risk of incorrect orders.

Related parts to inspect

You may also wish to check these exact category pages for the same vehicle when working on the drive shaft:

When a drivetrain component wears out, related components on the same car often require inspection too. Reviewing these dedicated pages for the Peugeot 2008 makes it easier to verify whether the problem lies solely with the drive shaft or involves another adjoining transmission component.

This is especially important on models where vibrations, play and unwanted sounds can travel between multiple drivetrain components. A quick look at related categories ensures you replace the correct part without overlooking adjacent wear that contributes to the same symptoms.

By taking a proactive approach and also inspecting the wheel bearings and ball joints while changing the drive shaft, you can save considerable time and garage labour costs while the suspension is already disassembled.

Why buy from CVJoint24?

CVJoint24 is your dedicated international shop for car drivetrain components, backed by Swedish specialist expertise and fast dispatch across the EU directly from our central warehouse in Helsingborg, Sweden. We understand that precise fitment is crucial, which is why our parts are sourced to strict technical standards for vehicles such as the Peugeot 2008. Our goal is to make ordering reliable spare parts straightforward and cost-effective. With streamlined logistics and stock ready for immediate dispatch, we help you keep your car's workshop downtime to an absolute minimum. Shopping with us gives you high-grade replacement car parts supported by specialists who understand automotive drivelines inside out.

Frequently asked questions about drive shafts for Peugeot 2008

How do I know if the drive shaft on my Peugeot 2008 is faulty?

The most common signs are clicking noises when cornering sharply, vibrations during acceleration, or visible grease leaks from split CV boots.

Can I replace just the CV joint instead of the entire drive shaft?

Yes, if the shaft itself is undamaged, you can often replace only the inner or outer CV joint, which can be a more cost-effective alternative.

Does the same drive shaft fit both the right and left side on a Peugeot 2008?

No, drive shafts usually differ in length and design between the right and left side. Always check the exact specifications for each side.

How does the engine type affect the choice of drive shaft?

Drive shafts are sized according to engine torque and gearbox ratios. A 1.2 PureTech therefore typically uses a different shaft than a 1.6 BlueHDi.

What is included when I buy a complete drive shaft from you?

Our complete drive shafts are supplied fully assembled with inner and outer CV joints, boots, and the required grease ready for direct installation.

Does the fitment guarantee apply when I select my car details?

Yes, when you select your vehicle's make, model, and engine variant, we guarantee that the drive shaft shown will fit your specific Peugeot 2008.