Drive shafts for Peugeot 206 CC

Looking for a replacement drive shaft for your Peugeot 206 CC? As Swedish driveline specialists, we supply an extensive range of premium drive shafts tailored specifically to your...

Products for Drive shafts for Peugeot 206 CC

22 products
1 - 22 of 22
Item no.:1150411
  • Position: Front left
  • Splines gearbox side: 22
  • Splines wheel side: 25
  • Total length: 600 mm
  • ABS teeth: 48
Item no.:1189626
  • Position: Front left
  • Splines gearbox side: 26
  • Splines wheel side: 21
  • Total length: 586 mm
  • ABS teeth: 48
Item no.:2115642
  • Position: Front right
  • Splines gearbox side: 22
  • Splines wheel side: 25
  • Total length: 880 mm
  • ABS teeth: 48
Item no.:2106272
  • Position: Front right
  • Splines gearbox side: 26
  • Splines wheel side: 21
  • Total length: 810 mm
  • ABS teeth: 48
Item no.:1116736
  • Position: Front left
  • Splines gearbox side: 26
  • Splines wheel side: 25
  • Total length: 577 mm
  • ABS teeth: 48
Item no.:2118814
  • Position: Front right
  • Splines gearbox side: 26
  • Splines wheel side: 25
  • Total length: 796 mm
  • ABS teeth: 48
Item no.:7301374
  • Position: Front right
  • Splines gearbox side: 26
  • Splines wheel side: 25
  • Total length: 796 mm
  • Joint diameter: 90 mm
Item no.:7301041
  • Position: Front left
  • Splines gearbox side: 26
  • Splines wheel side: 25
  • Total length: 577 mm
  • Joint diameter: 90 mm
Item no.:1125368
  • Position: Front left
  • Splines gearbox side: 24
  • Splines wheel side: 25
  • Total length: 596 mm
  • ABS teeth: 48
Item no.:216766
  • Position: Front right
  • Splines gearbox side: 24
  • Splines wheel side: 25
  • Total length: 892 mm
  • ABS teeth: 48
Item no.:1110028
  • Position: Front left
  • Splines gearbox side: 24
  • Splines wheel side: 25
  • Total length: 600 mm
  • Diameter 1: 90 mm
Item no.:217290
  • Position: Front right
  • Splines gearbox side: 24
  • Splines wheel side: 25
  • Total length: 892 mm
  • Diameter 1: 90 mm
Item no.:7306831
  • Position: Front left
  • Splines gearbox side: 24
  • Splines wheel side: 25
  • Total length: 592 mm
  • Joint diameter: 90 mm
Item no.:210371
  • Position: Front right
  • Splines gearbox side: 22
  • Splines wheel side: 25
  • Total length: 880 mm
  • Joint diameter: 87 mm
Item no.:115898
  • Position: Front left
  • Splines gearbox side: 24
  • Splines wheel side: 25
  • Total length: 593 mm
  • Diameter 1: 90 mm
Item no.:111261
  • Position: Front left
  • Splines gearbox side: 22
  • Splines wheel side: 25
  • Total length: 600 mm
  • Joint diameter: 87 mm
Item no.:2163185
  • Position: Front right
  • Splines gearbox side: 24
  • Splines wheel side: 25
  • Total length: 891 mm
  • ABS teeth: 48
Item no.:1102166
  • Position: Front left
  • Splines gearbox side: 22
  • Splines wheel side: 25
  • Total length: 597 mm
  • Joint diameter: 79 mm
Item no.:2112194
  • Position: Front right
  • Splines gearbox side: 22
  • Splines wheel side: 25
  • Total length: 879 mm
  • Joint diameter: 79 mm
Item no.:2122014
  • Position: Front right
  • Splines gearbox side: 24
  • Splines wheel side: 25
  • Total length: 801 mm
  • ABS teeth: 48
Item no.:1165861
  • Position: Front left
  • Splines gearbox side: 26
  • Splines wheel side: 25
  • Total length: 580 mm
  • Joint diameter: 88 mm
Item no.:2108797
  • Position: Front right
  • Splines gearbox side: 24
  • Splines wheel side: 25
  • Total length: 801 mm
  • Joint diameter: 88 mm

Drive shafts for Peugeot 206 CC

The Peugeot 206 CC is an iconic model that combines driving pleasure with an ingenious folding metal roof, making it a modern classic on European roads. To preserve your car's performance and safety, the drive shaft is a vital drivetrain component that demands regular attention. A drive shaft for Peugeot 206 CC must handle the distinct mechanical loads of front-wheel drive, particularly when matched with the lively engine options available for this car. Whether your car has the nimble 1.6-litre petrol unit or the punchy 2.0 S16, you need a shaft built to exact dimensions with the correct spline count so power is transferred without vibration or torque loss. We stock a comprehensive range covering the various versions of this popular convertible, ensuring you can find the correct replacement car parts for any model year.

What does the drive shaft do on a Peugeot 206 CC?

The drive shaft on your Peugeot 206 CC transfers rotational torque directly from the gearbox to the front road wheels. Because the 206 CC is front-wheel drive, the driveshafts must also accommodate steering angles and suspension travel while spinning at high speeds. This movement is handled by the inner and outer CV joints fitted at either end of the shaft. The inner joint allows axial plunging as the suspension compresses and rebounds, while the outer constant velocity joint enables the front wheels to steer smoothly. Without a sound drive shaft, engine power can never reach the road, making it the mechanical heart of your car's propulsion. A healthy shaft also keeps mechanical drag to a minimum, ensuring a smooth, refined drive.

Common signs of wear

Several clear warning signs indicate that a drive shaft on your Peugeot 206 CC is nearing the end of its service life. One of the most typical symptoms is a rhythmic clicking or knocking noise when navigating tight corners at low speeds, which usually points to a worn outer CV joint. If you feel pronounced vibrations through the steering wheel or floorpan under acceleration, an excessively worn inner joint is often the culprit. It is also essential to inspect the CV boots regularly; if a boot splits, grease escapes and road dirt enters, quickly destroying the precision-machined bearing surfaces inside the joint. Leaving these symptoms unchecked can lead to sudden component failure and leave you stranded, so prompt inspection is key to avoiding costly secondary damage.

How to choose the correct drive shaft

Choosing the correct drive shaft for Peugeot 206 CC can be tricky because specifications vary according to engine type, gearbox variant and build year. The most reliable way to ensure an exact fit is to filter our range by selecting your vehicle's make, model and engine variant. You should always verify the total length of the shaft along with the spline counts on both the wheel and gearbox ends, as variations occurred even within identical model years. Furthermore, take note of your braking system: on models equipped with ABS, the drive shaft frequently features an integrated reluctor ring. By filtering for your specific vehicle details, our shop presents the components intended for your car. If in doubt, we always recommend counting the splines on your existing shaft before ordering, as Peugeot used different component suppliers across production runs.

Related parts to inspect

Please also check these exact pages for the same vehicle when working on the drive shaft:

When one drivetrain component exhibits wear, adjacent parts on the same car often require attention as well. By comparing these dedicated pages for Peugeot 206 CC, it is much simpler to determine whether a fault lies purely within the drive shaft itself or in an adjacent section of the drivetrain.

This is especially important on cars where vibrations, play and strange noises can transfer across interconnected running gear. A quick check of related categories helps you avoid replacing one correct part while overlooking an adjacent worn component that causes the very same issue.

Why buy from cvjoint24.com?

CVJoint24 is your dedicated specialist for driveline components. We are a Swedish driveline specialist based in Helsingborg, Sweden, shipping quality parts quickly across the European Union. We understand the necessity of precise engineering and dependable technical expertise for your car. Thanks to our fitment accuracy, you can order with confidence knowing the parts you select will fit your Peugeot 206 CC without fuss. We maintain an in-depth inventory that generic motor factors simply cannot match, paired with swift dispatch directly from our central warehouse. Sourcing your parts from us ensures you get the right component first time, saving both time and labour during repairs. We combine specialist know-how with high-grade components to keep your car performing at its best, whether you are tackling the job yourself or taking it to a professional garage.

Frequently asked questions about drive shafts for Peugeot 206 CC

How do I find the right drive shaft for my Peugeot 206 CC?

The simplest and most reliable way is to select your car's make, model and engine in our search filter. This narrows the range so you only see drive shafts compatible with your specific engine and gearbox.

What are the most common symptoms of a failing drive shaft?

The most common signs are clicking noises when making sharp turns, vibrations through the steering wheel under acceleration, or visible grease leaks from split drive shaft boots.

Does the same drive shaft fit all engines in the 206 CC range?

No, drive shafts vary between variants such as the 1.6 16V, 2.0 S16 and 1.6 HDi. It is important to check both the overall length and the number of splines (teeth) before ordering.

Are boots and grease included when I buy a complete drive shaft?

Yes, our complete drive shafts are supplied fully assembled with inner and outer CV joints, boots, and the correct amount of grease, ready for immediate installation.

Is it difficult to replace the drive shaft on a Peugeot 206 CC myself?

It requires reasonable mechanical experience and the correct tools, such as a large socket for the hub nut and ball joint splitters to release the suspension. If in doubt, we recommend consulting a professional garage.

What does your fitment guarantee mean?

Our fitment guarantee means that if you have selected your exact vehicle details and we recommend a part that turns out not to fit, we will help you exchange it for the correct part at no extra cost.