Drive shafts for Volkswagen Golf VII Variant 2.0 TDI 4MOTION

When you need to replace a drive shaft on your Volkswagen Golf VII Variant 2.0 TDI 4MOTION, precision and quality are essential for the car's all-wheel-drive system. As a Swedish...

Products for Drive shafts for Volkswagen Golf VII Variant 2.0 TDI 4MOTION

19 products
1 - 19 of 19
Item no.:1179693
  • Position: Front left
  • Flange diameter: 108 mm
  • Total length: 487 mm
  • Splines wheel side: 36
Item no.:6100883
  • Position: Rear
  • Flange diameter: 94 mm
  • Total length: 630 mm
  • Splines wheel side: 36
Item no.:1179279
  • Position: Front left
  • Flange diameter: 108 mm
  • Total length: 486 mm
  • Splines gearbox side: 108
  • Splines wheel side: 36
Item no.:2149311
  • Position: Front right
  • Flange diameter: 108 mm
  • Total length: 600 mm
  • Splines wheel side: 36
Item no.:2130717
  • Position: Front right
  • Flange diameter: 108 mm
  • Total length: 785 mm
  • Splines gearbox side: 108
  • Splines wheel side: 36
Item no.:5124565
  • Position: Rear right
  • Flange diameter: 94 mm
  • Total length: 587 mm
  • Splines wheel side: 36
Item no.:111725
  • Position: Front left
  • Total length: 557 mm
  • Splines gearbox side: 37
  • Splines wheel side: 36
Item no.:115545
  • Position: Front left
  • Flange diameter: 100 mm
  • Total length: 524 mm
  • Splines gearbox side: 100
  • Splines wheel side: 36
Item no.:219853
  • Position: Front right
  • Flange diameter: 100 mm
  • Total length: 815 mm
  • Splines gearbox side: 100
  • Splines wheel side: 36
Item no.:219848
  • Position: Front right
  • Flange diameter: 119 mm
  • Total length: 760 mm
  • Splines wheel side: 36
Item no.:2134430
  • Position: Front right
  • Flange diameter: 119 mm
  • Total length: 575 mm
  • Splines wheel side: 36
Item no.:213419
  • Position: Front right
  • Total length: 785 mm
  • Splines wheel side: 36
Item no.:2146280
  • Position: Front right
  • Total length: 601 mm
  • Splines wheel side: 36
Item no.:313503
  • Position: Front
  • Splines wheel side: 36
Item no.:612940
  • Position: Rear
  • Total length: 587 mm
  • Splines wheel side: 36
Item no.:1129093
  • Position: Front left
  • Flange diameter: 108 mm
  • Total length: 470 mm
  • Splines wheel side: 36
Item no.:410164
  • Position: Rear left
  • Total length: 594 mm
  • Splines wheel side: 36
Item no.:311926
  • Position: Front
  • Inner splines: 27
  • Total length: 602 mm
  • Splines wheel side: 36
Item no.:1167262
  • Position: Front left
  • Flange diameter: 108 mm
  • Total length: 488 mm
  • Splines wheel side: 36

Drive shafts for Volkswagen Golf VII Variant 2.0 TDI 4MOTION

Finding the right drive shaft for a Volkswagen Golf VII Variant 2.0 TDI 4MOTION requires precision, as this specific model pairs a high-torque diesel engine with an advanced all-wheel-drive system. The drive shaft is a vital component that must cope with the substantial torque from the 2.0 TDI engine whilst working seamlessly alongside the power distribution of the 4MOTION setup. Here you will find components manufactured to meet or exceed original specifications, ensuring your car retains its handling characteristics and road safety. We focus on supplying parts accurately tailored to the unique chassis layout and drivetrain of this estate variant.

What does a drive shaft do on a Volkswagen Golf VII Variant 2.0 TDI 4MOTION?

The main task of the drive shaft on a Volkswagen Golf VII Variant 2.0 TDI 4MOTION is to transfer rotational power from the gearbox and differentials out to the wheels. Because this car features all-wheel drive, the driveshafts perform an even more intricate job than on a front-wheel-drive car. They must not only transfer torque but also accommodate wheel movements during suspension travel and steering without losing efficiency. In a 4MOTION car, power is actively split between the front and rear axles depending on grip levels, meaning each individual drive shaft is subject to varying loads. A fully functional drive shaft is therefore essential for the car's traction control and four-wheel-drive system to work at their best.

Common signs of wear

Several clear symptoms suggest a drive shaft on your Volkswagen Golf VII Variant 2.0 TDI 4MOTION may need replacing. One of the most typical signs is a clicking or knocking noise on tight turns, which usually points to wear in the outer CV joint. If you notice vibrations through the steering wheel or car body under acceleration, the inner CV joint might be worn instead. It is also wise to inspect the CV boots regularly; if a boot splits, grease leaks out and dirt gets in, rapidly ruining the mechanical parts inside the shaft. On four-wheel-drive models, drivetrain imbalances can also present as jerky progress under throttle.

How to choose the correct drive shaft

To pick the correct drive shaft for your Volkswagen Golf VII Variant 2.0 TDI 4MOTION, the most reliable method is to select your car's exact make, model and engine variant. Since the Golf VII platform covers numerous specifications, length, spline counts and mounting flanges vary considerably across different engine options and drivetrains. For 4MOTION models, it is also crucial to distinguish between front and rear driveshafts. Always check whether the shaft is intended for a manual gearbox or an automatic (DSG), as this frequently alters the inner gearbox-side design. By filtering accurately by your vehicle's engine and transmission, you eliminate the risk of ordering the wrong part and guarantee a seamless fit for your drivetrain.

Related parts to check

Feel free to check these exact pages for the same vehicle when working on the drive shaft:

When one drivetrain component shows wear, adjacent parts on the same car often require attention as well. By checking these exact pages for the Volkswagen Golf VII Variant 2.0 TDI 4MOTION, it becomes much simpler to tell whether an issue stems from the drive shaft itself or from a neighbouring section of the transmission system.

This is particularly true for models where vibrations, play and noises can transfer between several components across the drivetrain. A quick check of related categories minimises the risk of replacing the right part type whilst overlooking an adjoining item that contributes to the very same symptom.

Replacing split boots in good time can also save you substantial money by extending the working life of your existing drive shafts.

Why shop with CVJoint24?

CVJoint24 is the international shop of a Swedish driveline specialist, sending high-quality components from our central warehouse in Helsingborg, Sweden across the EU. We combine in-depth technical know-how with a comprehensive selection of quality parts for your Volkswagen Golf VII Variant 2.0 TDI 4MOTION. When you purchase from us, you get reliable spare parts backed by our fitment accuracy and knowledgeable customer support team who understand the technical demands of four-wheel-drive systems. Our commitment to quality and precision makes us the natural choice for both DIY mechanics and garages needing dependable components.

Frequently asked questions about drive shafts for Volkswagen Golf VII Variant 2.0 TDI 4MOTION

How do I know that the drive shaft will fit my Volkswagen Golf VII Variant 2.0 TDI 4MOTION?

The easiest and most reliable way is to select your car's exact make, model and engine variant in our search filter. This filters our range so that only drive shafts technically verified for your specific engine and 4MOTION system are displayed.

What are the most common signs that a drive shaft needs replacing?

The most common symptoms are clicking noises when turning at full lock, noticeable vibrations through the car during acceleration, or visible grease leaks caused by torn CV boots.

Is there a difference between the front and rear drive shafts on a Golf VII 4MOTION?

Yes, the front and rear drive shafts feature completely different designs, lengths and mounting fittings. It is therefore vital to verify the fitting position before placing your order.

Can I replace just the CV joint instead of the complete drive shaft?

Yes, provided the central shaft itself is undamaged, you can often save money by simply replacing the worn inner or outer CV joint. We supply both complete drive shafts and individual constant velocity joints.

How does the torque of the 2.0 TDI engine affect the drive shafts?

The high torque produced by the diesel engine places substantial strain on the drivetrain, particularly under hard acceleration. It is therefore especially important to install high-grade drive shafts engineered to endure these loads.

What does your fitment guarantee mean?

Our fitment guarantee means that when you select your vehicle's make, model and engine and we state that the part fits, we guarantee correct fitment. If anything does not fit as expected, our technical team will promptly help you find the correct replacement.