Drive shafts for Volvo S80 2.0 T

This section brings together drive shafts for the Volvo S80 2.0 T. It is dedicated exclusively to this front-wheel-drive saloon variant, ensuring you only view parts that fit your exact...

Products for Drive shafts for Volvo S80 2.0 T

21 products
1 - 21 of 21
Item no.:1134414
  • Position: Front left
  • Splines gearbox side: 26
  • Splines wheel side: 36
  • Total length: 540 mm
  • ABS teeth: 48
Item no.:2127066
  • Position: Front right
  • Splines gearbox side: 26
  • Splines wheel side: 36
  • Total length: 977 mm
  • ABS teeth: 48
Item no.:2172294
  • Position: Front right
  • Splines gearbox side: 26
  • Splines wheel side: 36
  • Total length: 1,010 mm
Item no.:1190382
  • Position: Front left
  • Splines gearbox side: 26
  • Splines wheel side: 36
  • Total length: 525 mm
  • ABS teeth: 48
Item no.:2134400
  • Position: Front right
  • Splines gearbox side: 26
  • Splines wheel side: 40
  • Total length: 953 mm
  • Joint diameter: 85 mm
Item no.:2110308
  • Position: Front right
  • Splines gearbox side: 28
  • Splines wheel side: 40
  • Total length: 952 mm
  • Joint diameter: 91 mm
Item no.:2149848
  • Position: Front right
  • Splines gearbox side: 26
  • Splines wheel side: 40
  • Total length: 955 mm
  • Joint diameter: 92 mm
Item no.:1199361
  • Position: Front left
  • Splines gearbox side: 26
  • Splines wheel side: 40
  • Total length: 604 mm
  • Joint diameter: 92 mm
Item no.:1148817
  • Position: Front left
  • Splines gearbox side: 28
  • Splines wheel side: 40
  • Total length: 594 mm
  • Joint diameter: 91 mm
Item no.:1186693
  • Position: Front left
  • Splines gearbox side: 24
  • Splines wheel side: 36
  • Total length: 535 mm
Item no.:2132686
  • Position: Front right
  • Splines gearbox side: 26
  • Splines wheel side: 36
  • Total length: 1,005 mm
  • ABS teeth: 48
Item no.:215182
  • Position: Front right
  • Splines gearbox side: 26
  • Splines wheel side: 36
  • Total length: 987 mm
  • Thread size: M10x1.5
Item no.:1127069
  • Position: Front left
  • Splines gearbox side: 26
  • Splines wheel side: 36
  • Total length: 580 mm
  • Joint diameter: 87 mm
Item no.:217994
  • Position: Front right
  • Splines gearbox side: 26
  • Splines wheel side: 36
  • Total length: 1,015 mm
  • ABS teeth: 48
Item no.:1152924
  • Position: Front left
  • Splines gearbox side: 26
  • Splines wheel side: 36
  • Total length: 560 mm
  • ABS teeth: 48
Item no.:118304
  • Position: Front left
  • Splines gearbox side: 35
  • Splines wheel side: 36
  • Total length: 435 mm
  • ABS teeth: 48
Item no.:213128
  • Position: Front right
  • Splines gearbox side: 39
  • Splines wheel side: 36
  • Total length: 667 mm
  • ABS teeth: 48
Item no.:211710
  • Position: Front right
  • Splines gearbox side: 39
  • Splines wheel side: 36
  • Total length: 668 mm
  • ABS teeth: 48
Item no.:118339
  • Splines gearbox side: 28
  • Splines wheel side: 40
  • Total length: 591 mm
Item no.:2164003
  • Splines gearbox side: 28
  • Splines wheel side: 40
  • Total length: 952 mm
Item no.:211058
  • Position: Front right
  • Splines gearbox side: 26
  • Splines wheel side: 36
  • Total length: 990 mm
  • ABS teeth: 48

Drive shafts for Volvo S80 2.0 T

The Volvo S80 is renowned for its high levels of comfort and poised handling, and the 2.0 T engine provides an excellent balance of performance and efficiency. To preserve this premium driving feel, you need a drive shaft that transfers the engine's torque to the wheels smoothly, without vibrations or unwanted noises. We specialise in these precise driveline components to ensure your car stays dependable for many kilometres to come. A drive shaft for a Volvo S80 2.0 T is an advanced precision component that must match the vehicle's chassis specification down to the millimetre. Because the 2.0 T model places distinct demands on strength and dimensions, choosing a part engineered specifically for this engine and gearbox configuration is essential.

What does a drive shaft do on the Volvo S80 2.0 T?

The primary job of the drive shaft is to transfer rotational power from the engine and gearbox directly to the front wheels. On a front-wheel-drive saloon such as the Volvo S80 2.0 T, the drive shafts endure considerable stress, especially under brisk acceleration and through tight corners. The assembly consists of a sturdy shaft fitted with two joints: an inner CV joint mating with the gearbox, and an outer CV joint located at the wheel hub. These joints allow the wheels to move up and down with the suspension and turn with the steering, all whilst maintaining constant power delivery. The materials used in the driveshaft are critical for withstanding severe torsional loads, and a properly functioning shaft is fundamental to a smooth, vibration-free, and safe drive.

Common signs of wear

There are several clear symptoms indicating that a drive shaft on your Volvo S80 2.0 T is failing. The most classic sign is a rhythmic clicking or knocking noise when cornering, which typically points to a worn outer CV joint. If you instead experience noticeable vibrations through the steering wheel or car body under acceleration, the inner CV joint is likely worn. It is also vital to inspect the CV boots regularly. If a boot tears, the protective grease is flung out whilst road dirt and moisture penetrate the joint. This rapidly causes premature failure of the constant velocity joint. If you spot grease splatters on the inside of your alloy wheel, inspect the drivetrain without delay.

How to choose the correct drive shaft

Selecting the correct spare parts for a Volvo S80 2.0 T requires attention to detail, as technical specifications vary. There are differences depending on whether your car is fitted with a manual or automatic gearbox, as well as whether you are replacing the left- or right-hand side. Furthermore, the number of splines—the teeth machined on the shaft ends—can differ across model years and trims. The most reliable way to ensure an exact fit on cvjoint24.com is to select your car's make, model, and engine variant. Filtering by your exact vehicle configuration displays the items that are technically compatible with your specific car, giving you total peace of mind that the replacement part will fit straight on during fitting.

Related parts to check

Be sure to check these dedicated pages for the same vehicle when working on the drive shaft:

When one drivetrain component shows signs of wear, nearby parts on the same car often require attention as well. By checking these exact pages for the Volvo S80 2.0 T, it becomes much easier to determine whether an issue lies with the drive shaft itself or with an adjacent part of the transmission system.

This is particularly relevant on models where vibrations, play, and noises can travel between multiple components within the drivetrain. A quick check of related categories minimises the risk of replacing the right type of component whilst overlooking an adjacent part that contributes to the very same problem.

Replacing worn related components at the same time reduces the likelihood of future garage visits and extends the service life of your car's entire drivetrain.

Why shop with CVJoint24?

As a Swedish driveline specialist shipping across Europe, we offer in-depth technical knowledge you rarely encounter at generic car parts stores. We understand the specific mechanical requirements of the Volvo S80 2.0 T and stock only components that meet our exacting quality standards. With our focus on precise compatibility and getting it right the first time, you avoid the hassle of incorrect parts. We dispatch promptly from our warehouse to get your vehicle back on the road swiftly. With us, you always receive the right part at a competitive price, backed by the confidence of dealing with genuine driveline specialists.

Frequently asked questions about drive shafts for Volvo S80 2.0 T

How do I know if the drive shaft on my Volvo S80 2.0 T needs replacing?

The most common signs are clicking noises when cornering, vibrations during acceleration, or grease leaking from a damaged CV boot. If vibrations increase with vehicle speed, it is often a sign of wear in the inner joint.

Does the same drive shaft fit both the left and right sides?

No, the drive shafts on a Volvo S80 2.0 T are usually different lengths on the left- and right-hand sides. It is therefore essential to check which side you need before placing your order.

Is there a difference between drive shafts for manual and automatic gearboxes?

Yes, the connections to the gearbox often differ between manual and automatic transmissions. Always select your car's exact model, year, and gearbox type to ensure you find the right version.

Are CV joints included when I buy a complete drive shaft?

Yes, when you buy a complete drive shaft from us, both the inner and outer CV joints are included along with pre-fitted boots, making installation much simpler.

Can I replace just the ABS ring if the drive shaft is otherwise intact?

Yes, on many Volvo S80 models you can replace just the ABS ring. However, it still requires separating the shaft from the wheel hub to gain access.

What does your fitment guarantee mean for the Volvo S80?

Our fitment guarantee means that when you select your vehicle's make, model, and engine variant and order the recommended part, we guarantee that it will fit your car correctly.