Fiat 500

Spare parts and drivetrain components for the Fiat 500.

Products for Fiat 500

28 products
25 - 28 of 28
Item no.:2114947
  • Position: Front right
  • Splines gearbox side: 22
  • Splines wheel side: 22
  • Total length: 850 mm
Item no.:2102428
  • Position: Front right
  • Splines gearbox side: 24
  • Splines wheel side: 25
  • Total length: 875 mm
  • Joint diameter: 84 mm
Item no.:0949586
Item no.:141007
  • Position: Inner
  • Inner splines: 24
  • Splines gearbox side: 24
  • Total length: 179 mm
  • Outer splines: 24
Showing 25–28 of 28 products

Drivetrain for Fiat 500

The Fiat 500 is an iconic model that pairs style with nimble handling, but keeping its lively driving characteristics requires a drivetrain in top condition. The drivetrain is the intricate system that transmits power from the engine right through to the wheels, and every single component plays a crucial role in overall performance. At CVJoint24, you will find an extensive selection of parts carefully chosen to fit your specific Fiat 500. As a Swedish driveline specialist, we understand that compact cars like this place unique demands on their running gear. The compact layout means components endure heavy stress in stop-start city traffic and through tight turns. By investing in premium car parts, you ensure your car stays safe and dependable for years to come, preserving the original driving feel that makes the Fiat 500 so distinctive.

How the drivetrain is engineered on the Fiat 500

The drivetrain on a Fiat 500 uses a front-wheel-drive configuration with a transverse engine, standard for modern city cars to maximise cabin room. Power leaves the gearbox and is distributed to the front wheels via two drive shafts. This layout includes an inner CV joint for the Fiat 500 on each side, whose primary role is to allow the drive shaft to plunge in and out as the suspension travels up and down. At the wheel hubs sits an outer CV joint for the Fiat 500, a precision-engineered constant velocity joint that must transfer torque smoothly while the front wheels steer at acute angles. Because the Fiat 500 often uses unequal-length driveshafts between the left and right sides, perfectly balanced components are vital to prevent driveline vibration. The entire assembly is shielded by durable rubber CV boots that retain essential grease and lock out grit and moisture, which is critical for long component life in tough European winters.

Common faults and symptoms

Catching drivetrain issues early can save significant time and money. One of the classic signs of wear on a Fiat 500 is a rhythmic clicking noise when cornering sharply, such as when parking or turning at a junction. This sound almost always points to a worn outer CV joint. If you notice shaking or shuddering instead, particularly under acceleration between 40 and 80 km/h, the issue often stems from an inner CV joint or an unbalanced drive shaft. Another common problem is a split CV boot; finding grease splattered inside the wheel rim or across the underside indicates torn rubber. Left unattended, road dirt and water will quickly ruin the joint. Ignoring these warning signs can ultimately cause a drive shaft to shear completely, cutting drive to the wheels and leaving you stranded—a situation that is both hazardous and costly.

Common parts to replace on the Fiat 500

When repairs are due, we supply a wide range covering every requirement for your Fiat 500. Our clear categorisation makes finding the correct spare parts simple based on your car's symptoms. Here are the most relevant categories for your vehicle:

  • Drive shafts for Fiat 500 - Replacing the complete shaft assembly is often the quickest, most reliable way to eliminate vibrations and joint noises simultaneously.
  • Outer CV joints for Fiat 500 - If your only issue is clicking on full lock, fitting a replacement outer joint is a cost-effective repair.
  • Inner CV joints for Fiat 500 - Inner joints are better shielded, but they need replacing if vibrations develop under engine load.

Choosing the correct category allows you to target the exact fault. We provide parts with the correct spline counts and dimensions, ensuring a straightforward fit and dependable long-term service.

How to find the right part for your Fiat 500

Navigate directly to the right category for your Fiat 500:

On a car with several possible driveline faults, it pays to start in the correct section straight away. By reviewing the dedicated component areas for the Fiat 500, you can distinguish easily between drive shaft, CV joint, or propeller shaft issues and proceed to the category that best matches your car's symptoms and fitment needs.

Because the Fiat 500 has been produced in numerous variants with different engines and transmissions, confirming compatibility before ordering is essential. The simplest and most reliable method is to select your car's make, model and engine on cvjoint24.com. Our system filters the catalogue to show products verified for your exact vehicle. Important details can still vary, such as between manual and automatic gearboxes or specific ABS rings. We always recommend checking the product photos and technical specifications, including overall length and spline teeth, to be 100% certain. Our database is continuously updated to cover European models, making us a dependable partner whenever you need the right Fiat components quickly.

Why shop at cvjoint24.com

Ordering from cvjoint24.com means choosing dedicated driveline expertise and high manufacturing standards over generic motor factors. As a Swedish driveline specialist, we have a technical focus few suppliers can match. We know exactly what is required for a drive shaft or CV joint to perform reliably, and we never cut corners on build quality. Backed by our central Swedish warehouse in Helsingborg and extensive stockholding, we offer fast delivery across the EU alongside components engineered for a precise fit on your Fiat 500. We are proud to be the trusted source for both professional garages and DIY mechanics looking for specialist knowledge in vehicle power transmission. When you buy from us, you receive high-calibre spare parts selected by true driveline specialists.

Frequently Asked Questions about Drivetrain for Fiat 500 - Spare Parts & Drive Shafts

How do I know if my Fiat 500 needs a new drive shaft?

The most common signs are vibrations through the steering wheel or bodywork under acceleration, along with clicking noises when taking sharp turns. If the vibrations stop as soon as you lift off the accelerator, it is often the inner joint or shaft that is worn.

Do all CV joints fit all Fiat 500 models?

No, specifications vary depending on engine size, model year and whether the car has a manual or automatic gearbox. Always select your vehicle's make, model and engine in our vehicle selector to find the exact replacement part.

What is the difference between an inner and outer CV joint on a Fiat 500?

The outer CV joint sits closest to the wheel and accommodates steering angles, whilst the inner CV joint is located by the gearbox and accommodates suspension movement. They wear differently and produce distinct symptoms.

Can I replace just the CV boot if it is split?

Yes, provided you catch the damage early and the joint is still clean and properly greased. If dirt and moisture have penetrated, or if the joint is already making noise, the entire CV joint should be replaced.

Why does my Fiat 500 vibrate under acceleration?

This is often caused by wear in the inner CV joint. As the joint wears, play develops, leading to imbalance and noticeable vibrations when engine power is transmitted to the wheels.