Inner CV joints for KIA

Find the right inner CV joint for your KIA by browsing our extensive catalogue for front-wheel-drive and all-wheel-drive models. We cater for petrol and diesel engines across all body...

Choose model

Choose a model to move to more precise products and the next step in the vehicle tree.

Products for Inner CV joints for KIA

327 products
313 - 327 of 327
Item no.:440695
  • Position: Inner
  • Inner splines: 24
  • Seal diameter: 41 mm
  • Total length: 165 mm
  • Joint diameter: 85 mm
Item no.:149945
  • Position: Inner
  • Inner splines: 22
  • Seal diameter: 41 mm
  • Total length: 149 mm
  • Joint diameter: 149 mm
Item no.:442608
  • Position: Inner
  • Inner splines: 24
  • Seal diameter: 41 mm
  • Total length: 165 mm
  • Joint diameter: 85 mm
Item no.:140807
  • Position: Front left, Inner
  • Inner splines: 22
  • Seal diameter: 41 mm
  • Total length: 149 mm
  • Joint diameter: 149 mm
Item no.:445893
  • Position: Inner
  • Inner splines: 24
  • Seal diameter: 41 mm
  • Total length: 165 mm
  • Joint diameter: 85 mm
Item no.:342803
  • Position: Inner
  • Inner splines: 22
  • Seal diameter: 41 mm
  • Total length: 149 mm
  • Joint diameter: 149 mm
Item no.:140543
  • Position: Inner
  • Inner splines: 24
  • Seal diameter: 41 mm
  • Total length: 165 mm
  • Joint diameter: 85 mm
Item no.:347248
  • Position: Inner
  • Inner splines: 22
  • Seal diameter: 41 mm
  • Total length: 149 mm
  • Joint diameter: 149 mm
Item no.:342955
  • Position: Inner
  • Inner splines: 22
  • Seal diameter: 41 mm
  • Total length: 149 mm
  • Joint diameter: 149 mm
Item no.:341887
  • Position: Inner
  • Inner splines: 22
  • Seal diameter: 41 mm
  • Total length: 149 mm
  • Joint diameter: 149 mm
Item no.:347952
  • Position: Inner
  • Inner splines: 22
  • Seal diameter: 41 mm
  • Total length: 149 mm
  • Joint diameter: 149 mm
Item no.:345575
  • Position: Inner
  • Inner splines: 22
  • Seal diameter: 41 mm
  • Total length: 149 mm
  • Joint diameter: 149 mm
Item no.:340819
  • Position: Inner
  • Inner splines: 22
  • Seal diameter: 41 mm
  • Total length: 149 mm
  • Joint diameter: 149 mm
Item no.:349041
  • Position: Inner
  • Inner splines: 22
  • Seal diameter: 41 mm
  • Total length: 149 mm
  • Joint diameter: 149 mm
Item no.:341006
  • Position: Inner
  • Inner splines: 22
  • Seal diameter: 41 mm
  • Total length: 149 mm
  • Joint diameter: 149 mm
Showing 313–327 of 327 products

Inner CV joints for KIA

The inner CV joint plays a fundamental role in the power transmission of your KIA. Unlike the outer CV joint, which primarily handles steering angles at the wheels, the inner CV joint is fitted closest to the gearbox or differential. Its primary job is to allow the drive shaft to move plunge axially as the car's suspension works up and down. For KIA owners, it is vital to know that a properly functioning inner joint is essential for a smooth, vibration-free driving experience, whether you drive a compact city car or a larger SUV.

Here at CVJoint24, we specialise in these exact components. Our range for KIA is carefully selected to meet the rigorous demands on strength and precision required by Korean engineering. By choosing the correct inner CV joint, you ensure that engine torque is transmitted efficiently without unnecessary wear on gearbox output shafts or oil seals. We stock parts that match KIA's precise specifications for materials and tolerances.

How inner CV joints differ between KIA models

Over recent decades, KIA has built an extensive vehicle line-up, ranging from front-wheel-drive small cars to advanced four-wheel-drive systems. This means the inner CV joint can vary substantially between different models. An all-wheel-drive KIA Sportage often uses sturdier inner constant velocity joints to handle higher torque loads compared to a smaller KIA Picanto. Key differences typically involve the number of splines engaging the gearbox, the overall diameter of the joint housing, and how it is secured inside the differential.

Furthermore, designs often vary between models equipped with a manual gearbox and those with an automatic or dual-clutch transmission (DCT). It is not uncommon for a single model series to have several inner CV joint variants depending on the engine option and gearbox type. That is why it is essential not just to rely on the model name, but to check technical dimensions or use our selector tool to guarantee compatibility with your car's drivetrain.

Common signs of wear

When an inner CV joint on a KIA begins to wear out, it usually gives clear warning signs, but these differ distinctly from the symptoms of a failing outer joint. The classic indication is vibration felt during acceleration. If you notice the whole car shuddering or shaking when you step on the accelerator, with the vibration disappearing the moment you lift off, the fault almost certainly lies with an inner CV joint. This happens because wear creates indentations in the housing tracks where the balls or tripod rollers bind under load.

Another symptom can be a dull thud or clunking noise when shifting between forward and reverse, or during engine braking. If a CV boot has split, grease will be thrown out, causing the joint to run dry and rapidly overheat from friction. If you spot grease splattered under the car near the gearbox, you should take action immediately to prevent total failure, which could damage the gearbox casing.

Choosing the correct inner CV joint for your KIA

Finding the right spare part for your KIA does not have to be difficult when you follow the right steps. The most reliable method is selecting your car's make, model and engine in our search tool, which filters out unsuitable options. However, because vehicle manufacturers sometimes revise components mid-production run, you may occasionally need to confirm physical dimensions. The most important details to verify are the spline tooth count on the shaft entering the gearbox and the diameter of the seal surface.

If you plan to replace the joint yourself or have it fitted at a garage, we also recommend checking the condition of your Drive shafts for KIA. Replacing the complete driveshaft can often be more cost-effective if multiple components show wear. Always ensure that the new joint is fitted with the correct grease and fresh CV boot clips, as proper lubrication is absolutely vital for longevity and reliable operation in your KIA.

Popular KIA models to explore

Continue to the right KIA model for inner CV joints:

With such a broad range, navigating to model level is often the best next step. Choosing your exact model takes you to a page tailored to fitment, drivetrain setup, and the exact parts suited to your car.

Whether you drive a sporty Pro Ceed or a spacious Carnival, we supply the car parts needed to restore your vehicle's performance. Our catalogue is built to guide you smoothly through technical variants so you can order with confidence.

Why buy from CVJoint24?

As a Swedish driveline specialist shipping from our central warehouse in Helsingborg, Sweden, we understand the importance of premium quality and reliable supply across the EU. When your KIA is booked into the garage or up on axle stands, you cannot afford delays or parts that do not fit. We focus exclusively on drivetrain components, giving us in-depth technical knowledge that general car parts retailers rarely match. We know the specific driveline configurations across the KIA model range.

We take pride in helping you find the right part at competitive prices without compromising on durability. By ordering from a dedicated driveline specialist, you get the assurance that your KIA will regain its original smooth running and reliability. Welcome to CVJoint24 – your trusted partner for durable power transmission components.

Frequently Asked Questions about Inner CV Joints for KIA

What are the most common symptoms of a failing inner CV joint on a KIA?

The most common symptom is noticeable vibration through the car body or steering wheel during acceleration. Unlike wheel imbalance, which typically appears at specific road speeds, vibrations from a worn inner CV joint are directly linked to how much throttle you apply.

Can I replace just the inner CV joint, or do I need to replace the complete drive shaft?

On most KIA models, you can easily replace just the inner CV joint. This is often a cost-effective solution provided the drive shaft itself is straight and undamaged.

Why is it important to select the exact vehicle details when ordering?

KIA often fits different inner CV joints depending on whether the car has a manual or automatic gearbox, as well as the engine output. Selecting your exact make, model and engine variant helps ensure the correct spline count and dimensions for your vehicle.

Are a boot and grease included when I buy an inner CV joint for my KIA?

Yes, our inner CV joints are supplied as complete kits. This means you receive a model-specific CV boot, high-quality CV joint grease and all essential fitting hardware, such as circlips and clamps.

How long does an inner CV joint last on a KIA?

An inner CV joint can last the lifetime of the vehicle as long as the CV boot remains intact. However, if the boot splits and lets dirt in, or grease leaks out, the joint can wear out in just a few thousand kilometres.

Is there a difference between inner CV joints for AWD and FWD KIA models?

Yes, all-wheel-drive (AWD) models such as the KIA Sportage or Sorento often feature different inner joint designs to manage power delivery to both the front and rear axles, making it vital to select the correct replacement part.