Inner CV joints for Volkswagen Golf VI Variant 1.6 TDI 4MOTION

This page gathers inner CV joints for the Volkswagen Golf VI Variant 1.6 TDI 4MOTION. It focuses solely on this estate version with four-wheel drive, ensuring you only view parts suited...

Products for Inner CV joints for Volkswagen Golf VI Variant 1.6 TDI 4MOTION

9 products
1 - 9 of 9
Item no.:0496383
  • Position: Inner
  • Inner splines: 28
  • Joint diameter: 108 mm
Item no.:0485946
  • Position: Inner
  • Seal diameter: 100 mm
  • Inner splines: 33
  • Joint diameter: 100 mm
Item no.:648865
  • Position: Rear, Inner
  • Diameter: 86 mm
  • Splines gearbox side: 33
  • Width: 34 mm
Item no.:342636
  • Position: Inner
  • Seal diameter: 130 mm
  • Inner splines: 34
  • Splines gearbox side: 34
Item no.:343342
  • Position: Front, Inner
  • Inner splines: 28
  • Total length: 32 mm
Item no.:0445370
  • Position: Inner
  • Seal diameter: 59,5 mm
  • Inner splines: 33
  • Total length: 79 mm
  • Splines gearbox side: 36
Item no.:349906
  • Position: Front, Inner
  • Seal diameter: 100 mm
  • Inner splines: 33
  • Outer diameter: 99 mm
  • Splines gearbox side: 33
Item no.:343764
  • Position: Inner
  • Inner splines: 28
Item no.:0454761
  • Position: Inner
  • Seal diameter: 94 mm
  • Inner splines: 33
  • Number of joints: 3
  • Splines gearbox side: 33

Inner CV joints for Volkswagen Golf VI Variant 1.6 TDI 4MOTION

Maintaining the drivetrain on a Volkswagen Golf VI Variant 1.6 TDI 4MOTION is vital to ensure that power delivery remains smooth and efficient. The inner CV joint plays a central role in this system, particularly on models equipped with 4MOTION four-wheel drive where loads vary depending on road conditions and driving surfaces. This specific model requires components that are precisely dimensioned to handle the torque from the 1.6 TDI engine while allowing the necessary movement for the suspension to work properly.

With us, you will find inner CV joints carefully selected to meet the exact technical specifications of your Golf VI Variant. Because the 4MOTION system distributes power across all four wheels, it is especially important that every link in the chain, including the inner constant velocity joint, remains in peak condition. A defective joint will not only cause discomfort while driving, but can also cause consequential damage to the gearbox or differential if not dealt with in time.

What does the inner CV joint do on a Volkswagen Golf VI Variant 1.6 TDI 4MOTION?

The inner CV joint is fitted closest to the gearbox or differential, and its primary task is to transfer power from the engine to the drive shaft. Unlike the outer CV joint, which mainly accommodates steering angles, the inner CV joint's primary function is to allow the drive shaft to plunge in and out lengthways. This axial plunge is essential because the distance between the gearbox and the wheel hub changes constantly as the car's suspension travels up and down over road surfaces.

On a Volkswagen Golf VI Variant 1.6 TDI 4MOTION, this function is critical for maintaining stable power delivery on any road surface. The inner joint acts as a telescopic link that absorbs these movements without compromising driving torque. Precision manufacturing and high-grade materials ensure that the joint can handle continuous movement without developing play or generating vibrations that travel through the chassis.

Common signs of wear

Wear on an inner CV joint often presents differently from an outer joint. The most typical symptom of a failing inner CV joint on your Volkswagen Golf VI Variant 1.6 TDI 4MOTION is vibration during acceleration. These vibrations are usually felt through the whole car rather than just in the steering wheel, and they tend to disappear as soon as you lift off the accelerator. Under load, the worn joint can no longer keep the driveshaft properly centred due to internal wear or pitting in the raceways.

Another sign is unusual noise, such as a dull clunk or knock when alternating between forward and reverse, or during engine braking. It is also important to inspect the CV boot regularly. If the boot splits, lubricating grease escapes and dirt enters, dramatically accelerating wear. If you spot grease splatters underneath the car near the gearbox, this is a clear sign that the boot has failed and the inner CV joint is at risk of damage.

Choosing the right inner CV joint

Selecting the correct inner CV joint for a Volkswagen Golf VI Variant 1.6 TDI 4MOTION requires attention to detail. Several factors determine compatibility, including the spline count on the shaft, the joint diameter, and how it attaches to the gearbox. Because 4MOTION models feature a distinct drivetrain compared to front-wheel-drive variants, parts do not always interchange between versions even though they share the same body and engine.

To make certain that you order the correct part, always select your vehicle by its exact make, model and engine variant in our shop. This filters the selection down to parts engineered specifically for your vehicle's setup. We stock products for this model, guaranteeing an accurate fit. It is also worth checking whether your car has a manual or automatic gearbox, as this can affect which inner joint specification is required.

Related components to inspect

You can also check these exact pages for the same vehicle when working on the inner CV joint:

When one drivetrain component shows signs of wear, related parts on the vehicle often require inspection as well. By checking these exact pages for the Volkswagen Golf VI Variant 1.6 TDI 4MOTION, it becomes simpler to determine whether a fault lies purely in the inner CV joint or in an adjoining part of the driveline.

This is particularly relevant on models where vibration, play and noises can transmit between multiple parts of the same drivetrain. A quick check of related categories reduces the risk of replacing one correct part while overlooking an adjacent component that causes the same symptom.

Carrying out a thorough check of the complete drivetrain ensures your car remains reliable while preventing unnecessary repair bills down the line. Replacing a worn boot or joint in good time is an economical safeguard against costly breakdowns.

Why shop at CVJoint24?

CVJoint24 is the international shop of a Swedish driveline specialist, dispatching directly from our central warehouse in Helsingborg, Sweden. We focus specifically on components such as drive shafts, CV joints and propeller shafts, giving us specialised technical expertise and product depth that general parts suppliers rarely match. When you order from us, you can trust that you will receive high-quality car parts tested to cope with the demands of modern vehicles like the Volkswagen Golf VI Variant 1.6 TDI 4MOTION.

We provide accurate fitment when you select your car by make, model and engine, ensuring total confidence that your replacement part will fit correctly. With rapid delivery across the EU and a knowledgeable customer support team that truly understands drivetrains, we are the trusted choice for DIY mechanics and professional workshops alike. Our goal is to help you get the right part first time and keep your vehicle on the road with long-lasting quality.

Frequently asked questions about inner CV joints for Volkswagen Golf VI Variant 1.6 TDI 4MOTION

What are the most common symptoms of a worn inner CV joint on a Golf VI 4MOTION?

The most common signs are vibrations through the car's chassis under acceleration and load, as well as clunking noises when applying the throttle or engine braking. The vibrations often disappear as soon as you let off the accelerator.

Does the inner CV joint differ between 4MOTION and front-wheel-drive Golf VI models?

Yes, the drivetrain on 4MOTION models is often reinforced and has different dimensions to handle all-wheel drive. It is therefore vital to select your exact vehicle model and engine specification to find the right part.

Can I replace just the CV boot if the joint is still functioning?

Yes, if you catch a split boot early before dirt has entered or the grease has leaked out completely, replacing the CV boot and repacking it with fresh grease can be enough to save the joint.

How many inner CV joints does my Volkswagen Golf VI Variant 1.6 TDI 4MOTION have?

Your car has a total of four inner CV joints: two on the front axle (one on each side at the gearbox) and two on the rear axle (one on each side at the rear differential).

Why does the car vibrate only under acceleration when the inner CV joint is faulty?

Under acceleration, the joint is subjected to maximum load. If there is wear or pitting in the inner raceways, the drive shaft cannot centre itself properly under torque, causing imbalance and noticeable vibrations.

Are fitting accessories such as grease and clips included when I buy an inner CV joint?

Yes, our inner CV joints are supplied as complete kits including the necessary grease, CV boot and fitting clips to ensure a correct and long-lasting installation.