Inner CV joints for Volkswagen Passat 3.2 FSI 4MOTION

Here you will find a carefully selected range of inner CV joints tailored for the Volkswagen Passat 3.2 FSI 4MOTION. To ensure that you select components that match your four-wheel-drive...

Products for Inner CV joints for Volkswagen Passat 3.2 FSI 4MOTION

9 products
1 - 9 of 9
Item no.:0497585
  • Position: Inner
  • Inner splines: 28
  • Seal diameter: 108 mm
  • Total length: 32 mm
  • Joint diameter: 108 mm
Item no.:0470390
  • Position: Inner
  • Inner splines: 33
  • Seal diameter: 100 mm
  • Total length: 34 mm
  • Joint diameter: 100 mm
Item no.:0468196
  • Position: Front right, Inner
  • Inner splines: 34
  • Seal diameter: 46 mm
  • Total length: 128,5 mm
  • Joint diameter: 85 mm
Item no.:144124
  • Position: Inner
  • Inner splines: 34
  • Seal diameter: 31 mm
  • Total length: 156 mm
  • Joint diameter: 85 mm
Item no.:645605
  • Position: Rear, Inner
  • Splines gearbox side: 33
  • Outer splines: 33
  • Diameter: 86 mm
  • Width: 34 mm
Item no.:345532
  • Position: Front right, Inner
  • Inner splines: 28
  • Seal diameter: 50 mm
  • Total length: 300 mm
  • Joint diameter: 102 mm
Item no.:340311
  • Position: Front, Inner
  • Inner splines: 28
  • Seal diameter: 108 mm
  • Total length: 32 mm
  • Joint diameter: 107 mm
Item no.:0490288
  • Position: Inner
  • Inner splines: 33
  • Splines gearbox side: 36
  • Seal diameter: 59,5 mm
  • Total length: 79 mm
Item no.:347577
  • Position: Front, Inner
  • Inner splines: 34
  • Seal diameter: 119 mm
  • Total length: 78 mm
  • Joint diameter: 119 mm

Inner CV joints for Volkswagen Passat 3.2 FSI 4MOTION

Maintaining the drivetrain on a powerful car like the Volkswagen Passat 3.2 FSI 4MOTION is essential for ensuring that the output from the VR6 engine reaches the road wheels efficiently. The inner CV joint plays a pivotal role in this system, especially given the vehicle's advanced all-wheel-drive setup. At CVJoint24, you will find inner CV joints selected specifically to meet the rigorous demands on torque and durability that this model requires. We focus on providing parts that not only fit physically, but also perform reliably under the heavy loads encountered during spirited driving and varying road conditions.

Our range for the Passat 3.2 FSI is carefully curated to match or exceed original equipment specifications. Choosing the right components ensures that your car's 4MOTION system operates seamlessly, which is vital for both grip and stability. As driveline specialists, we understand the technical intricacies of Volkswagen power transmission and supply only components that we know can handle the demands of the potent 3.2-litre engine.

What does the inner CV joint do on a Volkswagen Passat 3.2 FSI 4MOTION?

The inner CV joint is mounted closest to the gearbox or differential, and its primary task is to transfer rotational power while allowing the drive shaft to plunge along its axis. On a Volkswagen Passat 3.2 FSI 4MOTION, this is particularly critical because suspension travel and the torque distribution of the all-wheel drive require a flexible yet exceptionally sturdy connection. Unlike the outer constant velocity joint, which copes with steep steering angles, the inner joint focuses on absorbing the axial length changes that occur when the car travels over bumps or under hard acceleration.

Without a healthy inner joint, you risk creating imbalances across the entire driveline. This component, commonly a tripod design or a ball-type plunge joint, must plunge smoothly to compensate for the changing distance between the gearbox and the wheel hub as the suspension works. For the 3.2 FSI model, high engine torque subjects the joint to substantial internal forces, making quality metallurgy and proper lubrication critical factors for long service life.

Common signs of wear

When an inner CV joint begins to wear on your Passat 3.2 FSI, it typically manifests as body vibrations under acceleration. This differs noticeably from an outer joint, which usually clicks when turning on full lock. The vibrations can often be felt through the seat or floorpan and tend to become more pronounced at higher speeds or under heavy engine load. It is common for these vibrations to vanish the moment you lift off the accelerator, which is a classic symptom pointing directly to the inner joint.

Another common warning sign is grease spatter or oil residue around the gearbox output, usually caused by a split CV boot. When a boot tears, road dirt and moisture penetrate the joint while essential grease is thrown out. This quickly causes overheating and severe mechanical wear. If you spot grease underneath the car, act promptly to prevent complete joint failure, which could also damage the gearbox output flanges or the differential.

How to choose the correct inner CV joint

Selecting the correct part for a Volkswagen Passat 3.2 FSI 4MOTION requires precision. Because this model features specific technical requirements for its all-wheel-drive system, dimensions, spline counts and bolt patterns can differ significantly from standard front-wheel-drive variants. The most reliable way to select the right component is to filter by your car's make, model and engine variant in our catalogue. This presents only the parts confirmed for your vehicle's exact specification, eliminating costly ordering mistakes.

Always check that the technical specifications match your existing part, particularly if previous owners may have replaced components. At CVJoint24, we offer an accurate fitment guarantee so you can order with complete peace of mind. Our inner CV joints are supplied as comprehensive repair kits, complete with the correct high-pressure grease, new retaining clips and a durable drive shaft boot. Getting the right part first time saves time in the workshop and money in the long run.

Related parts to check

Make sure to inspect these exact pages for the same vehicle when working on the inner CV joint:

When one drivetrain component shows signs of wear, adjacent parts on the same car often require attention as well. By cross-referencing these exact pages for the Volkswagen Passat 3.2 FSI 4MOTION, you can easily determine whether an issue lies purely within the inner CV joint or involves another nearby section of the drivetrain.

This is especially important on four-wheel-drive vehicles where vibrations, play and unwanted noises can transfer symptoms across several driveline components. Checking related categories helps ensure you do not replace one part while overlooking a neighbouring component that contributes to the very same problem.

Carrying out a thorough inspection of the entire drivetrain ensures that your Passat maintains its refined drive and long-term reliability. Replacing worn CV boots as a preventative measure is inexpensive protection against costly mechanical repairs later on.

Why shop with CVJoint24?

CVJoint24 is the international shop of a Swedish driveline specialist, dispatching orders across Europe from our central warehouse in Helsingborg, Sweden. We combine in-depth technical knowledge with a product range built to the highest standards for demanding road conditions. For owners of the Volkswagen Passat 3.2 FSI 4MOTION, this means access to parts tested to handle the specific torque demands of the VR6 engine and 4MOTION transmission. We do not just supply spare parts; we provide confidence through expert engineering and rigorous component selection.

With our accurate fitment guarantee and prompt dispatch across the EU, we help keep your vehicle off the ramp for as short a time as possible. We understand how crucial it is to receive the correct part straight away, which is why our customer support team and vehicle filtering tools are tailored to guide you smoothly to the right car parts. Choosing CVJoint24 gives you a dedicated driveline specialist focused on quality and customer satisfaction every time.

Frequently asked questions about inner CV joints for Volkswagen Passat 3.2 FSI 4MOTION

How do I know whether the inner or outer CV joint is faulty on my Passat?

Inner CV joints typically cause vibrations through the body shell under acceleration, whereas outer CV joints produce a clicking noise when cornering.

Does the same inner CV joint fit all Volkswagen Passat models?

No, the 3.2 FSI 4MOTION often features unique dimensions and splines due to its four-wheel-drive system and higher torque output.

Do I have to replace the entire drive shaft if the inner joint is worn?

No, you can usually replace just the inner CV joint on its own, provided the shaft itself is undamaged and has not suffered an imbalance.

Are the CV boot and grease included when I buy an inner CV joint from you?

Yes, our inner CV joints are supplied as complete kits including a model-specific CV boot, specialised grease and all necessary fitting accessories.

Can I carry on driving with a vibrating inner CV joint?

It is not recommended. Severe vibrations can damage gearbox bearings and, in the worst case, cause the drive shaft to break free while driving.

How quickly do you deliver parts for the Volkswagen Passat 3.2 FSI?

We offer fast delivery on most of our stocked products so that you can get your car back on the road without delay.