Inner CV joints for Volkswagen Polo Variant

Need a replacement inner CV joint for your Volkswagen Polo Variant? As a Swedish driveline specialist, CVJoint24 provides a carefully selected range of inner CV joints engineered to...

Choose version

Choose a version to refine the results and get closer to the right product.

Products for Inner CV joints for Volkswagen Polo Variant

11 products
1 - 11 of 11
Item no.:0423418
  • Position: Inner
  • Inner splines: 33
  • Seal diameter: 78 mm
  • Total length: 32 mm
  • Joint diameter: 92 mm
Item no.:0405444
  • Position: Inner
  • Inner splines: 33
  • Seal diameter: 94 mm
  • Total length: 32 mm
  • Joint diameter: 94 mm
Item no.:0401902
  • Position: Inner
  • Inner splines: 33
  • Seal diameter: 100 mm
  • Total length: 34 mm
  • Joint diameter: 100 mm
Item no.:340364
  • Position: Inner
  • Inner splines: 30
  • Seal diameter: 100 mm
  • Total length: 57,6 mm
  • Joint diameter: 100 mm
Item no.:0486436
  • Position: Inner
  • Inner splines: 33
  • Seal diameter: 78 mm
  • Total length: 32 mm
  • Joint diameter: 92 mm
Item no.:0458487
  • Position: Inner
  • Inner splines: 33
  • Seal diameter: 94 mm
  • Total length: 32 mm
  • Joint diameter: 94 mm
Item no.:0430713
  • Position: Inner
  • Inner splines: 33
  • Seal diameter: 100 mm
  • Total length: 34 mm
  • Joint diameter: 100 mm
Item no.:0403966
  • Position: Inner
  • Inner splines: 33
  • Seal diameter: 78 mm
  • Total length: 32 mm
  • Joint diameter: 92 mm
Item no.:0433372
  • Position: Inner
  • Inner splines: 33
  • Seal diameter: 94 mm
  • Total length: 32 mm
  • Joint diameter: 94 mm
Item no.:7309937
  • Position: Inner
  • Inner splines: 33
  • Seal diameter: 94 mm
  • Total length: 32 mm
  • Joint diameter: 94 mm
Item no.:0487999
  • Position: Inner
  • Inner splines: 33
  • Seal diameter: 94 mm
  • Total length: 32 mm
  • Joint diameter: 94 mm

Inner CV joints for Volkswagen Polo Variant

The inner CV joint is a fundamental part of the drivetrain in your Volkswagen Polo Variant. Unlike the outer joint, which handles large steering angles at the wheels, the inner CV joint is mounted against the gearbox. Its primary job is to allow the drive shaft to plunge in and out longitudinally as the suspension works, while simultaneously transferring torque from the engine to the wheels. For a car such as the Volkswagen Polo Variant, which is often used for both urban journeys and longer trips, a properly functioning inner constant velocity joint is crucial for a vibration-free and comfortable driving experience. We stock an extensive range for this model, ensuring we can provide the correct solution whatever your car's specific configuration.

What does the inner CV joint do on a Volkswagen Polo Variant?

On a front-wheel-drive car such as the Volkswagen Polo Variant, the inner CV joint serves as the link between the gearbox output shaft and the driveshaft itself. It is engineered to absorb the axial movements that occur when the suspension moves up and down over road imperfections. Without this flexibility, the drive shaft would either be forced into the gearbox or pulled out of position, resulting in immediate mechanical failure. Depending on the engine and transmission, the inner joint is typically a tripod or ball-type design, packed with specialised grease that minimises friction and heat build-up under load. Maintaining this component in top condition is essential for your entire drivetrain.

Common signs of wear

Wear in an inner CV joint on a Volkswagen Polo Variant often manifests differently from outer joint failures. The most typical symptom is vibration or shuddering through the chassis under acceleration, particularly at higher speeds or when carrying heavy loads. These vibrations tend to disappear the moment you lift off the accelerator. Another telltale sign is a clunking noise when applying the throttle or during engine braking. If the CV boot protecting the joint has split, grease can escape, allowing road dirt to enter and rapidly wear down the internal bearing surfaces. If you spot grease splattered on the underside of your vehicle near the gearbox, it is time to inspect the joint before total failure occurs.

How to choose the correct inner CV joint

Selecting the correct inner CV joint for your Volkswagen Polo Variant requires precision, as dimensions and spline counts can vary depending on whether the car has a manual or automatic gearbox, as well as the engine fitted. The most critical factors are the spline count both towards the gearbox and onto the drive shaft, as well as the outer diameter of the joint. To make finding the right car parts simple, select your vehicle's make, model and engine in our store. This filters our catalogue to show only the spare parts that are technically compatible with your vehicle. Backed by our specialist knowledge and focus on accurate fitment, you can rest assured that the replacement part you order will work flawlessly in your drivetrain.

Related components to check

Take a look at these exact pages for the same vehicle when working on the inner CV joint:

When a driveline component shows signs of wear, neighbouring car parts on the same vehicle often warrant inspection too. By checking these exact pages for the Volkswagen Polo Variant, it is easier to determine whether the issue stems purely from the inner CV joint or from an adjacent section of the drivetrain.

This is especially important on models where vibrations, play and unusual noises can transfer symptoms across several driveline components. Checking related categories helps ensure you do not replace one part while overlooking a neighbouring component that contributes to the very same problem.

Why choose CVJoint24

CVJoint24 is your dedicated partner for specialist driveline parts. We combine comprehensive technical know-how with a broad range of high-grade components for the Volkswagen Polo Variant. Our goal is to help you source the correct part straight away, with total confidence in fitment and quality. As a Swedish driveline specialist shipping across the EU from our central warehouse in Helsingborg, we provide the expertise, accurate fitment and reliable spare parts you need to keep your car's drivetrain performing at its best.

Frequently asked questions about inner CV joints for Volkswagen Polo Variant

What are the most common symptoms of a failing inner CV joint on a Polo Variant?

The most common signs are vibrations throughout the car under acceleration, particularly at speeds between 70–100 km/h. The vibrations usually stop when you release the accelerator, unlike wheel imbalance which is felt constantly.

Can I replace just the inner CV joint, or do I need to replace the entire drive shaft?

On the Volkswagen Polo Variant, you can easily replace just the inner CV joint provided the shaft itself is undamaged. This is often a cost-effective solution compared to replacing the complete drive shaft.

How do I ensure I get the correct spline count on my new inner CV joint?

The most reliable method is to select your vehicle by make, model and engine variant in our search tool. To be completely sure, you can also count the teeth on the old joint before fitting, as variations can occur between different engine options.

Are grease and a CV boot included when I buy an inner CV joint from you?

Yes, our inner CV joint kits are supplied complete with dedicated grease, a CV boot and the necessary mounting hardware, such as clips and circlips, to ensure a proper installation.

Why does my Polo Variant only vibrate when accelerating?

This is a classic symptom of a worn inner constant velocity joint. Under acceleration, load is applied to the internal components of the joint; if there is excessive play or pitting inside the housing, it generates vibrations that travel through the chassis.

How quickly will an inner CV joint for my Polo Variant be dispatched?

We offer fast delivery on most of our products across Europe. If you place your order on a weekday before our cut-off time, your inner CV joint is normally dispatched the very same day so you receive it quickly.