Opel Insignia A

Spare parts and drivetrain components for the Opel Insignia A.

Products for Opel Insignia A

71 products
1 - 24 of 71
Item no.:345661
  • Position: Inner
  • Inner splines: 35
  • Splines gearbox side: 27
Item no.:5142894
  • Position: Rear right
  • Splines gearbox side: 34
  • Splines wheel side: 30
  • Total length: 840 mm
  • Joint diameter: 79 mm
Item no.:4142075
  • Position: Rear left
  • Splines gearbox side: 34
  • Splines wheel side: 30
  • Total length: 791 mm
  • Diameter 1: 79 mm
Item no.:0516484
  • Position: Outer
  • Inner splines: 24
  • Splines wheel side: 30
  • Seal diameter: 52 mm
  • Outer splines: 30
Item no.:6255632
  • Position: Rear
  • Total length: 2,310 mm
  • Number of joints: 4
  • Number of centre bearings: 2
Item no.:0893736
  • Position: Rear
  • Inner diameter: 30 mm
  • Bearing thickness: 13 mm
  • Hole spacing c/c: 268 mm
Item no.:0854622
  • Position: Front
  • Inner diameter: 30 mm
  • Bearing thickness: 13 mm
  • Hole spacing c/c: 320 mm
Item no.:249741
  • Position: Inner
  • Inner splines: 26
  • Seal diameter: 37,6 mm
  • Total length: 123 mm
  • Joint diameter: 85 mm
Item no.:2188628
  • Position: Front right
  • Splines gearbox side: 34
  • Splines wheel side: 30
  • Total length: 598 mm
  • Joint diameter: 91 mm
Item no.:117606
  • Splines gearbox side: 34
  • Splines wheel side: 30
  • Total length: 665 mm
  • Diameter 1: 91 mm
  • Diameter 2: 86 mm
Item no.:1145411
  • Position: Front left
  • Splines gearbox side: 25
  • Splines wheel side: 30
  • Total length: 632 mm
  • Diameter 1: 84 mm
Item no.:0530877
  • Position: Outer
  • Inner splines: 27
  • Seal diameter: 59 mm
  • Outer splines: 30
  • ABS teeth: 29
Item no.:0470291
  • Position: Inner
  • Inner splines: 25
  • Seal diameter: 35 mm
  • Total length: 100 mm
  • Joint diameter: 92 mm
Item no.:2177428
  • Position: Front right
  • Splines gearbox side: 25
  • Splines wheel side: 30
  • Total length: 1,008 mm
  • Joint diameter: 84 mm
Item no.:211490
  • Splines gearbox side: 25
  • Splines wheel side: 34
  • Total length: 444 mm
Item no.:247880
  • Position: Front right, Inner
  • Inner splines: 26
  • Seal diameter: 35 mm
  • Joint diameter: 93 mm
  • Outer splines: 27
Item no.:218556
  • Position: Front right
  • Splines gearbox side: 27
  • Splines wheel side: 30
  • Total length: 614 mm
  • Joint diameter: 91 mm
Item no.:346979
  • Position: Front, Inner
  • Inner splines: 26
  • Seal diameter: 35 mm
  • Total length: 161 mm
  • Outer splines: 26
Item no.:0619938
  • Total length: 124 mm
Item no.:0608495
  • Total length: 99 mm
Item no.:0620456
  • Total length: 126 mm
Item no.:0684264
  • Total length: 115 mm
Item no.:359381
  • Position: Front, Outer
  • Inner splines: 26
  • Seal diameter: 53 mm
  • Outer splines: 30
  • Thread size: M24X1.5
Item no.:398367
  • Position: Front
  • Inner diameter: 34 mm
  • Outer diameter: 55 mm
Showing 1–24 of 71 products

Drivetrain for Opel Insignia A

The Opel Insignia A, introduced as the successor to the Vectra, is renowned for its comfort and sophisticated engineering. Maintaining these qualities requires a fully functioning drivetrain. The drivetrain is the core of the vehicle's power transmission, carrying engine torque out to the driven wheels. On a substantial, powerful car like the Insignia A, these components face heavy loads, especially on high-torque diesel models and turbocharged petrol variants. Investing in the correct spare parts is vital to avoid consequential damage to the gearbox and suspension.

At CVJoint24, we understand the importance of an exact fit. An incorrect dimension on a drive shaft or CV joint can lead to imbalance and premature wear. We have therefore curated a range tailored specifically to the Opel Insignia A, where every part is carefully selected to match or exceed the vehicle manufacturer's standards. By choosing dedicated parts, you ensure your car's handling and driving dynamics remain intact for many years to come.

How the Opel Insignia A drivetrain is engineered

The layout of the drivetrain on the Opel Insignia A varies depending on whether the car is front-wheel drive or equipped with all-wheel drive (Adaptive 4x4). On front-wheel-drive models, the system relies primarily on two drive shafts running from the gearbox to the front wheels. Each drive shaft uses an inner and an outer CV joint to accommodate both suspension travel and steering angles. On four-wheel-drive models, an additional propeller shaft sends torque rearwards to the final drive, requiring extra components such as centre bearings and universal joints to keep rotation smooth and vibration-free.

The Insignia A relies on sturdy components to cope with its kerb weight, but complex linkages and high torque loads mean CV boots and joints must be kept in prime condition. If a boot splits, road dirt penetrates and grease escapes, rapidly destroying the precision-machined surfaces inside the constant velocity joint. Understanding this assembly helps you pinpoint where an issue has started and determine which parts to prioritise when carrying out repairs.

Common faults and symptoms

Several clear symptoms indicate that the drivetrain on your Opel Insignia A is worn. One of the most typical signs is a clicking or knocking sound on full lock under acceleration. This usually points to a failing outer CV joint on the Opel Insignia A. If you experience vibrations through the car under acceleration instead, particularly at higher speeds, it often signals that an inner CV joint on the Opel Insignia A is worn or that the driveshaft itself has developed imbalance.

For owners of 4x4 models, pay close attention to vibrations originating from the centre of the car. This can indicate trouble with the propeller shaft or its centre bearing mount. Another frequent issue is split drive shaft boots. If you spot grease splattered on the inside of the wheel rim or beneath the chassis, act quickly before the entire joint suffers terminal wear. Spotting these signs early often saves you from costly repairs and avoids having to replace complete shaft assemblies.

Common parts to replace on the Opel Insignia A

Depending on driving style and mileage, certain components on the Insignia A require replacement more often than others. Our catalogue is structured so you can quickly locate the right section. Here are the most frequently requested parts for this model:

  • Drive shaft for Opel Insignia A – multiple variants to cover every engine and gearbox combination.
  • Outer CV joint for Opel Insignia A – dedicated versions for precise torque transfer while steering.
  • Inner CV joint for Opel Insignia A – engineered to minimise vibrations from the gearbox output.
  • Propeller shaft for Opel Insignia A – 2 premium-quality options for four-wheel-drive models.

Beyond these main units, boot kits and ABS rings are essential items. Because the Insignia A features an advanced stability programme, undamaged, clean ABS rings are critical so wheel sensors receive accurate readings. Replacing an entire drive shaft can sometimes prove more cost-effective than fitting individual joints, giving you a complete assembly with fresh boots and mounting hardware straight out of the box.

How to find the right part for your Opel Insignia A

Go directly to the right category for your Opel Insignia A:

On a vehicle with several possible drivetrain issues, starting in the correct category makes diagnosis and repair much simpler. By comparing the dedicated product groups for the Opel Insignia A, it is easy to tell whether the problem lies with a drive shaft, a CV joint or a prop shaft, and then continue to the page that matches your car's symptoms and fitment.

Finding the right component among 38 different drivetrain parts is straightforward. The most reliable method is to select your Opel Insignia A by make, model and engine variant in our vehicle selector. This filters out unsuitable items and displays parts engineered for your car's exact specification. Bear in mind that during the Insignia A production run, variations occurred in technical details such as spline counts on drive shafts, depending on whether the car has a manual or automatic gearbox.

We always recommend comparing technical measurements, such as overall length and spline tooth count, with the component fitted to your car if you are in any doubt. Our product pages include detailed specifications to assist you. If your vehicle is an all-wheel-drive model, check carefully whether the part is intended for the front or rear axle. Our customer support team is always on hand to help confirm fitment for your Opel, saving you time and hassle in the workshop.

Why shop with CVJoint24

CVJoint24 is the international shop of a Swedish driveline specialist, with our central warehouse located in Helsingborg, Sweden. Rather than offering every generic car part, we focus exclusively on power transmission components. This gives us specialised technical expertise and a depth of stock that general factors cannot match. When you order from us, you receive parts manufactured to high precision and built to withstand harsh European roads and challenging winters.

We combine technical knowledge with an intuitive online shop designed to help you find the correct spare parts on the first attempt. With dedicated vehicle selection and fast dispatch across the European Union, we are the trusted partner for DIY mechanics and professional garages looking for OE-level quality at fair prices. Choose CVJoint24 for specialist support and reliable parts that keep your Opel Insignia A driving smoothly.

Frequently Asked Questions about Opel Insignia A Drivetrain Parts – High-Quality Spares

How do I know whether it is the inner or outer CV joint that has failed on my Insignia?

A worn outer CV joint typically produces a clicking or popping noise when cornering, whereas a worn inner CV joint tends to cause shuddering or vibrations throughout the car under acceleration, whether you are turning or driving straight ahead.

Does the same drive shaft fit both manual and automatic Opel Insignia A models?

No, drive shafts usually differ between manual and automatic gearboxes due to varying lengths and mounting points. Always select your vehicle's exact make, model and engine to ensure you get the correct part for your car.

Do you sell complete propeller shafts for the 4x4 Opel Insignia?

Yes, our range includes propeller shafts specifically designed for four-wheel-drive Opel Insignia A models, offering a cost-effective alternative to expensive original dealer parts.

What should I do if the CV boot is split?

If the boot has split recently, it may be enough to fit a replacement CV boot kit and pack it with fresh grease. However, if dirt and moisture have already contaminated the joint, you should consider replacing the entire CV joint to prevent breakdown.

Is the ABS ring included when I purchase an outer CV joint?

On models where the ABS ring is fitted directly onto the CV joint, it is generally included in our kits. Always check the product specifications to confirm the exact contents of the kit.

Why does my Opel Insignia A vibrate at higher speeds?

Vibrations can simply be caused by unbalanced wheels, but if the shaking occurs specifically under acceleration, it is often a sign of wear in the drive shafts or the propeller shaft centre bearing.