Outer CV joints for Opel Insignia A

In need of a new outer CV joint for your Opel Insignia A? At cvjoint24.com you will find premium model-matched parts that ensure smooth power transfer and lasting durability. Select your...

Products for Outer CV joints for Opel Insignia A

9 products
1 - 9 of 9
Item no.:0516484
  • Position: Outer
  • Inner splines: 24
  • Splines wheel side: 30
  • Seal diameter: 52 mm
  • Outer splines: 30
Item no.:0530877
  • Position: Outer
  • Inner splines: 27
  • Seal diameter: 59 mm
  • Outer splines: 30
  • ABS teeth: 29
Item no.:359381
  • Position: Front, Outer
  • Inner splines: 26
  • Seal diameter: 53 mm
  • Outer splines: 30
  • Thread size: M24X1.5
Item no.:0559484
  • Position: Outer
  • Inner splines: 23
  • Seal diameter: 52,3 mm
  • Outer splines: 30
  • Thread size: M24X1,5
Item no.:3592135
  • Position: Front, Outer
  • Inner splines: 26
  • Seal diameter: 60 mm
  • Outer splines: 30
  • Thread size: M24X1,5
Item no.:3582859
  • Position: Outer
  • Inner splines: 26
  • Seal diameter: 52 mm
  • Outer splines: 33
  • Thread size: M22X1,5
Item no.:6591447
  • Position: Outer
  • Inner splines: 22
  • Splines wheel side: 30
  • Outer diameter: 79 mm
Item no.:3511869
  • Position: Outer
  • Inner splines: 24
  • Splines wheel side: 30
  • Outer diameter: 85 mm
Item no.:0504133
  • Position: Front, Outer
  • Inner splines: 27
  • Splines wheel side: 30
  • Outer diameter: 100 mm

Outer CV joints for Opel Insignia A

The Opel Insignia A is renowned for its comfort and sophisticated drive systems, whether front-wheel drive or complex all-wheel drive (AWD). The outer CV joint is a crucial component in your car's drivetrain, ensuring engine torque reaches the wheels reliably even at full steering lock. At CVJoint24, you will find model-matched components that meet or exceed original equipment specifications for your Opel Insignia A. We supply parts engineered to withstand demanding European road and weather conditions, delivering long service life and dependable performance. By choosing top quality from the outset, you prevent premature repairs and maintain the exact driving dynamics designed by Opel.

What does the outer CV joint do on an Opel Insignia A?

The outer CV joint is positioned at the outer end of the drive shaft, right at the wheel hub. Its primary role is to transfer driving power from the gearbox to the wheels while allowing them to move vertically with the suspension and turn freely with the steering. On an Opel Insignia A, this component handles substantial mechanical loads, especially on higher-output engines delivering high torque. Because it is a constant velocity joint, it transfers power at a continuous speed regardless of steering angle. Without an intact outer CV joint, the car could not negotiate turns under power without severe vibration and jerking. Keeping this component in optimal condition is vital for safe, smooth driving in all conditions.

Common signs of wear

The most frequent sign of a failing outer CV joint on an Opel Insignia A is a distinct clicking or knocking noise when cornering sharply, such as during parking or tight turns. If the noise intensifies under acceleration while turning, the joint's internal ball tracks are worn. Another common symptom is vibration felt through the steering wheel at certain speeds, though this can sometimes be confused with wheel imbalance. You should also check for grease splattered around the wheel arch or inner wheel rim, which indicates a split drive shaft boot. If grease escapes and road dirt penetrates the joint, wear accelerates rapidly and total failure can quickly follow. Taking prompt action at the first sign of wear saves money and prevents a breakdown on the road.

How to choose the correct outer CV joint

To choose the right outer CV joint for your Opel Insignia A, it is essential to check technical specifications carefully. Because this model was produced with a broad range of engines, from economical diesels to powerful V6 units, CV joint dimensions vary across variants. The key differences lie in the number of splines (teeth) on the outer stub shaft entering the wheel hub, as well as on the inner connection to the driveshaft. Additionally, verify whether your car requires an integrated ABS ring fitted to the joint or reads the wheel speed via an alternative sensor design. The most reliable method is selecting your car's make, model and engine in our vehicle filter, ensuring you get the exact matching part for your car's drivetrain and saving valuable time during installation.

Related parts to check

Please also check these exact pages for the same vehicle when working on the outer CV joint:

When one drivetrain component shows signs of wear, related parts on the vehicle often require close inspection. Comparing these specific pages for Opel Insignia A makes it easy to determine whether the issue lies in the outer CV joint itself or in an adjacent section of the drivetrain.

This is especially important on models where vibrations, play and noises can travel between interconnected drivetrain components. A quick inspection of related categories prevents replacing one part while overlooking a neighbouring component that contributes to the same issue.

While replacing the outer CV joint on your Opel Insignia A, inspecting the rest of the driveline is sound practice. CV boots for Opel Insignia A should always be inspected; if dry or showing hairline cracks, replace them immediately to protect the joint. If you find heavy corrosion or experience pronounced vibrations, a complete drive shaft for Opel Insignia A may prove more cost-effective overall. Do not forget to check for radial play in your inner CV joint for Opel Insignia A, as inner wear often produces similar drivetrain symptoms. Here is a list of components relevant to your vehicle's driveline:

Why shop at cvjoint24.com

As the international shop of a Swedish driveline specialist, cvjoint24.com offers unmatched range depth for the Opel Insignia A. We understand that precise fitment is essential for every repair, which is why we provide an accurate fitment guarantee on our tailored parts. By focusing exclusively on drivetrain parts, we deliver specialist technical knowledge that general car parts stores cannot match. Our central Swedish warehouse ships across the European Union, ensuring you receive your parts promptly to get your car back on the road. When you order from us, you receive a carefully sourced component engineered to meet your car's exact demands. Our goal is to make ordering reliable driveline components straightforward, fast and accurate every time.

Frequently asked questions about outer CV joints for Opel Insignia A

How do I know if my Opel Insignia A needs a new outer CV joint?

The most common symptom is a rhythmic clicking noise heard when turning sharply under acceleration. If the noise disappears when driving straight ahead, it is usually the outer constant velocity joint that is worn.

Can I replace just the CV joint, or do I have to replace the complete drive shaft?

On the Opel Insignia A, you can easily replace just the outer CV joint if the shaft itself is undamaged. This is often a much more economical option than replacing the entire drive shaft.

Does the same outer CV joint fit all engine variants of the Insignia A?

No, it varies depending on engine size, gearbox type, and whether the car has front-wheel drive or all-wheel drive. Always select your exact make, model and engine to find the correct version.

Are the CV boot and grease included when I buy an outer CV joint from you?

Yes, our outer CV joints are supplied as complete fitting kits containing the joint, a tailored CV boot, high-quality grease, and the necessary clips and circlips.

What happens if I carry on driving with a failing CV joint?

If the joint fails completely, power will no longer be transmitted to the wheel, meaning the car will lose drive entirely and leave you stranded. It can also cause secondary damage to surrounding suspension components.

Is it difficult to replace the outer CV joint on an Opel Insignia A?

It requires proper tools and some mechanical experience, as the wheel hub and brakes need to be dismantled. However, for a confident DIY mechanic with the right equipment, it is a perfectly manageable job.