Opel Vectra B

Spare parts and drivetrain components for Opel Vectra B.

Products for Opel Vectra B

61 products
1 - 24 of 61
Item no.:0390507
  • ABS teeth: 29
  • Inner diameter: 67 mm
  • Outer diameter: 79 mm
  • Width: 11,4 mm
Item no.:349531
  • Position: Front, Inner
  • Inner splines: 27
  • Splines gearbox side: 22
Item no.:343416
  • Position: Inner
  • Seal diameter: 35 mm
  • Inner splines: 25
  • Diameter: 35 mm
  • Splines gearbox side: 22
Item no.:330150
  • Position: Front
  • ABS teeth: 29
  • Inner diameter: 67 mm
  • Outer diameter: 79 mm
  • Width: 11,4 mm
Item no.:0520992
  • Position: Outer
  • ABS teeth: 29
  • Seal diameter: 52 mm
  • Inner splines: 25
  • Outer splines: 33
Item no.:0699714
  • Position: Front
  • Diameter: 82 mm
  • Inner diameter: 22 mm
Item no.:0450748
  • Position: Inner
  • Seal diameter: 35 mm
  • Inner splines: 25
  • Outer splines: 34
  • Joint diameter: 92 mm
Item no.:1189760
  • Position: Front left
  • Total length: 595 mm
  • Splines gearbox side: 34
  • Splines wheel side: 33
Item no.:2142841
  • Position: Front right
  • Total length: 957 mm
  • Splines gearbox side: 34
  • Splines wheel side: 33
Item no.:1134234
  • Position: Front left
  • Total length: 592 mm
  • Splines gearbox side: 34
  • Splines wheel side: 33
  • ABS teeth: 29
Item no.:0514273
  • Position: Outer
  • ABS teeth: 29
  • Seal diameter: 52 mm
  • Inner splines: 22
  • Outer splines: 33
Item no.:0543569
  • Position: Outer
  • ABS teeth: 29
  • Seal diameter: 52 mm
  • Inner splines: 22
  • Outer splines: 22
Item no.:1138684
  • Position: Front left
  • Total length: 596 mm
  • Splines gearbox side: 22
  • Splines wheel side: 33
  • ABS teeth: 29
Item no.:2134230
  • Position: Front right
  • Total length: 956 mm
  • Splines gearbox side: 22
  • Splines wheel side: 33
  • ABS teeth: 29
Item no.:0619832
  • Position: Front
  • Diameter: 76 mm
  • Outer diameter: 19 mm
Item no.:0429721
  • Position: Inner
  • Inner splines: 25
  • Outer diameter: 92 mm
  • Splines wheel side: 34
Item no.:0506442
  • Position: Outer
  • ABS teeth: 29
  • Seal diameter: 55 mm
  • Inner splines: 35
  • Outer splines: 33
Item no.:0484624
  • Position: Inner
  • Inner splines: 22
  • Outer diameter: 84 mm
  • Splines wheel side: 22
Item no.:110042
  • Position: Front left
  • Total length: 597 mm
  • Splines gearbox side: 22
  • Splines wheel side: 33
  • ABS teeth: 0
Item no.:0698882
  • Position: Front
  • Outer diameter: 19 mm
Item no.:3472642
  • Position: Front, Inner
  • Inner splines: 35
  • Outer diameter: 88 mm
  • Splines wheel side: 27
Item no.:343321
  • Position: Inner
  • Seal diameter: 35 mm
  • Inner splines: 25
  • Outer splines: 22
Item no.:210398
  • Position: Front right
  • Total length: 956 mm
  • Splines gearbox side: 22
  • Splines wheel side: 33
Item no.:212903
  • Total length: 955 mm
  • Splines gearbox side: 22
  • Splines wheel side: 22
Showing 1–24 of 61 products

Drivetrain for Opel Vectra B

The Opel Vectra B is a classic model that requires diligent drivetrain maintenance to preserve driving comfort and road safety. As a Swedish driveline specialist in power transmission, we provide a comprehensive range of components tailored specifically for this model. With a total of 43 matched parts, we cover most repair needs that arise across the car's drivetrain. Selecting components with the exact required specifications is essential, as the Vectra B was manufactured with numerous engine options and gearboxes throughout its production run. These variations directly influence the dimensions of components such as drive shafts and joints. By investing in quality-assured car parts from a specialist, you ensure that your vehicle retains its original handling characteristics and that every repair delivers lasting reliability.

How the drivetrain is engineered on the Opel Vectra B

The drivetrain on a front-wheel-drive Opel Vectra B is a sophisticated assembly comprising a gearbox that distributes power to the front wheels via two drive shafts. Each driveshaft is a critical link and is fitted with two specific joints: an inner CV joint mounted directly to the gearbox output and an outer CV joint located at the wheel hub. The outer joint is a Rzeppa design, engineered to accommodate tight steering angles while transferring torque, which is essential for steering control. The inner joint is typically a tripod configuration that accommodates axial movement as the suspension travels up and down. Furthermore, ABS rings are fitted to the outer joints to feed vital rotational data to the vehicle's braking system. This mechanical assembly endures heavy stress, especially in demanding European winter conditions where road grit and moisture constantly challenge the integrity of protective CV boots.

Common faults and symptoms

Several distinct warning signs indicate that your Opel Vectra B drivetrain components may be reaching the end of their service life. One of the most typical symptoms is a rhythmic clicking or knocking noise when taking sharp corners, which almost invariably points to a worn outer CV joint for Opel Vectra B that has lost its grease lubrication. If you instead notice noticeable vibrations through the steering wheel or cabin floor during brisk acceleration, an inner CV joint for Opel Vectra B has likely developed play in its track. Another frequent issue on this model is an ABS warning lamp illuminating intermittently or permanently. This is often caused by an ABS ring that has cracked due to rust expanding beneath it, disrupting the sensor's readings. Disregarding these early warning signals can ultimately lead to total joint failure and an immobilised vehicle.

Common replacement parts for the Opel Vectra B

Within our dedicated range for the Opel Vectra B, we have organised the components to make finding the correct item straightforward. We see consistent demand for specific drivetrain items based on the model's technical configuration. We currently stock 19 different complete drive shaft assemblies, covering everything from the entry-level petrol units up to the potent V6 options. In addition, we supply 18 types of outer constant velocity joints catering to various spline specifications and ABS setups, as well as 3 dedicated inner CV joints for the most widespread gearbox types. We also carry 3 variants of ABS rings with the correct tooth counts for the vehicle's sensor setup. In many cases, replacing an entire drive shaft for Opel Vectra B proves most cost-effective if wear is present in multiple areas, as workshop labour costs are typically lower than rebuilding individual joints.

Find the right part for your Opel Vectra B

Navigate directly to the relevant subcategory for your Opel Vectra B:

On a vehicle with several possible driveline faults, it is best practice to begin in the correct category straight away. Comparing the dedicated component groups for the Opel Vectra B makes it simple to distinguish between issues with drive shafts, CV joints or propeller shafts, guiding you directly to the selection that matches your symptoms and fitment needs.

Why choose CVJoint24

CVJoint24 is your trusted partner for Opel power transmission components. As a Swedish driveline specialist, we understand the specific requirements of maintaining older classics such as the Opel Vectra B. Our focus is on offering impressive category depth, ensuring we stock the specialised parts that general motor factors frequently lack. We place prime importance on technical accuracy and exact fitment, built on years of dedicated niche experience. By providing straightforward selection by vehicle make, model and engine variant, alongside knowledgeable technical support from drivetrain specialists, we offer the peace of mind you need when buying online. Choosing us means receiving more than just spare parts: you gain direct access to genuine expertise and an EU-wide logistics hub in Sweden dedicated to keeping your Opel on the road with minimal downtime.

Frequently Asked Questions about Drivetrain for Opel Vectra B

How do I know if a CV joint is failing on my Opel Vectra B?

The most common symptoms are a clicking noise on full steering lock while driving (outer CV joint) or vibrations through the car under acceleration (inner CV joint).

Can I replace just the ABS ring on my Vectra B?

Yes, if the CV joint itself is in good working order, you can replace just the ABS ring, which is often a far more cost-effective solution when dealing with ABS system fault codes.

Why are there so many different drive shafts for the Opel Vectra B?

This is because the Vectra B was built with many different engines (from 1.6 to 2.5 V6) and gearboxes, requiring different shaft lengths and spline counts.

What is included when I buy a CV joint kit from you?

Our CV joint kits are supplied complete with the CV joint, boot, grease, clips and, where applicable, a new centre bolt or hub nut for a complete installation.

How do I find the right part for my car?

Select your make, model and engine variant in the search filter at the top of the page. Our system will then display the 43 parts that technically match your exact Opel Vectra B.

Is it difficult to replace a drive shaft on a Vectra B myself?

It requires a moderate level of mechanical knowledge and the right tools, but it is a standard job. We always recommend checking the splines and dimensions before fitting.