Outer CV joints for BMW 3

Looking for a high-quality outer CV joint for your BMW 3? At CVJoint24 you will find a broad selection of drivetrain parts, precision-engineered to meet the strict demands of your...

Choose version

Choose a version to refine the results and get closer to the right product.

Products for Outer CV joints for BMW 3

36 products
25 - 36 of 36
Item no.:450490
  • Position: Rear, Outer
  • Splines wheel side: 28
  • Seal diameter: 57 mm
  • Outer splines: 28
  • Splines gearbox side: 25
Item no.:350744
  • Position: Outer
  • Inner splines: 33
  • Seal diameter: 56 mm
  • Outer splines: 31
  • ABS teeth: 31
Item no.:3532671
  • Position: Front, Outer
  • Inner splines: 33
  • Seal diameter: 56 mm
  • Outer splines: 31
  • Thread size: M16X1,5X72
Item no.:0594335
  • Position: Outer
  • Inner splines: 33
  • Splines wheel side: 31
  • Outer diameter: 86 mm
Item no.:652369
  • Position: Rear, Outer
  • Inner splines: 24
  • Seal diameter: 69 mm
  • Outer splines: 27
  • ABS teeth: 48
Item no.:354997
  • Position: Front, Outer
  • Inner splines: 33
  • Seal diameter: 64,8 mm
  • Outer splines: 30
  • ABS teeth: 48
Item no.:355458
  • Position: Outer
  • Inner splines: 33
  • Seal diameter: 56 mm
  • Outer splines: 31
  • ABS teeth: 31
Item no.:353022
  • Position: Front, Outer
  • Inner splines: 33
  • Seal diameter: 64,8 mm
  • Outer splines: 30
  • ABS teeth: 48
Item no.:357879
  • Position: Front, Outer
  • Inner splines: 33
  • Seal diameter: 64,8 mm
  • Outer splines: 30
  • ABS teeth: 48
Item no.:354596
  • Position: Front, Outer
  • Inner splines: 33
  • Seal diameter: 64,8 mm
  • Outer splines: 30
  • ABS teeth: 48
Item no.:353590
  • Position: Front, Outer
  • Inner splines: 33
  • Seal diameter: 64,8 mm
  • Outer splines: 30
  • ABS teeth: 48
Item no.:354365
  • Position: Front, Outer
  • Inner splines: 33
  • Seal diameter: 64,8 mm
  • Outer splines: 30
  • ABS teeth: 48
Showing 25–36 of 36 products

Outer CV joints for BMW 3

Maintaining the drivetrain on a BMW 3 is crucial for preserving the sheer driving pleasure and precision the brand is renowned for. The outer CV joint is a critical component that endures immense stress, especially under heavy steering lock and sharp acceleration. Here at CVJoint24 you will find a carefully curated range of outer CV joints covering a wide spectrum of 3 Series models. Whether you drive a classic rear-wheel-drive variant or a modern xDrive model, components with precise tolerances are essential to ensure vibration-free power delivery. As specialists in outer CV joints for BMW, we focus on providing parts that match or exceed original equipment specifications.

Every item in our stock is carefully selected to withstand harsh European roads and winters, as well as the demands of both city commuting and high-speed motorway driving. Choosing the right spare part not only extends the service life of your vehicle, but also ensures that critical safety systems such as ABS and traction control operate seamlessly, as the outer joint frequently interacts directly with these sensors. We aim to be your natural partner for drivetrain repairs, offering deep technical expertise and a product line designed around real-world market needs.

What does an outer CV joint do on a BMW 3?

The outer CV joint (constant velocity joint) handles the technically demanding task of transferring torque from the BMW 3 drive shaft to the front wheels (or rear wheels on certain models), while simultaneously allowing the hub to steer and travel up and down with the suspension. On a BMW 3, this is especially vital because the chassis is finely tuned to give communicative steering feedback to the driver. The joint consists of inner and outer tracks housing precision steel balls that glide along machined grooves, allowing a steady rotational speed regardless of the operating angle.

Without a healthy outer constant velocity joint, power transfer would become jerky and mechanically unstable whenever turning. It is engineered to cope with the steep angles encountered at full lock, placing tremendous demands on metal hardness and grease quality. Inside the unit, specialised high-pressure grease minimises friction and heat build-up, completely enclosed by a rubber CV boot. If this boot tears, precision internal surfaces are quickly exposed to road grit and water, swiftly causing joint failure. The outer CV joint is therefore one of the most vital components for your car's mobility and roadworthiness.

Common symptoms of wear

The most typical symptom of a worn outer CV joint on a BMW 3 is a rhythmic clicking or knocking noise heard when cornering sharply at low speeds, such as during parking manoeuvres. The frequency of the noise speeds up with road speed and usually fades once the steering is straightened. This occurs when the steel balls have worn indentations into the bearing tracks, creating play that produces knocking sounds under angular load. Ignoring this sound risks joint seizure or outright failure, which causes an immediate total loss of drive.

Another clear warning sign is vibration felt through the steering wheel or chassis during acceleration. While driveline vibration can often be attributed to wheel imbalance, internal damage inside a drive shaft joint can produce very similar symptoms. You should also inspect the inside of your alloy wheels and wheel arches for flung grease. If the drive shaft boot has split, centrifugal force quickly expels the grease, leaving the moving parts dry and vulnerable. Catching a split boot early can often save the joint itself; once clicking has started, replacing the complete outer joint is the only reliable remedy.

How to select the right outer CV joint

Selecting the correct unit for your BMW 3 may seem challenging, given the numerous engineering variations between engine sizes, manual or automatic gearboxes, and whether the car features xDrive all-wheel drive. The primary differences between joints lie in the spline count on the inner and outer shafts, as well as whether the joint incorporates an integrated ABS reluctor ring. To ensure you find the right fit first time, we always recommend selecting your vehicle by make, model and engine variant in our store selector. This instantly filters out irrelevant parts and displays only matching options.

Once you have identified the right option, double-check the listed technical dimensions where available, such as external spline count and oil seal diameter. On certain BMW models, chassis revisions occurred mid-production year, which can affect joint fitment. Shopping with us gives you access to detailed technical data to help you verify every dimension. Our goal is to remove guesswork and ensure the replacement component fits your car first time, saving both time and workshop labour costs during installation.

Related driveline parts to inspect

We recommend checking these exact pages for your vehicle while working on the outer CV joints:

When one drivetrain component suffers wear, neighbouring parts on the same vehicle should be inspected as well. Cross-referencing these exact pages for the BMW 3 makes it far simpler to pinpoint whether a problem originates in the outer CV joint or in an adjoining section of the transmission.

This is particularly valuable on cars where vibrations, play and knocking sounds can travel across connected components in the drivetrain. A quick check of related categories minimises the risk of replacing one part while overlooking an adjacent component that causes the same underlying issue.

Why buy your parts from CVJoint24?

CVJoint24 is the international shop of a Swedish driveline specialist, supplying vehicle owners across the EU directly from our central warehouse in Helsingborg, Sweden. We combine a comprehensive product range with focused expertise that general car-parts suppliers cannot match. When you purchase an outer CV joint for your BMW 3 from us, you get high-grade components backed by dedicated technical support and an accurate fitment promise when selected via your vehicle's make, model and engine.

We recognise how essential your car is for everyday life, which is why we prioritise prompt European dispatch on all stocked products. By specialising exclusively in driveline components, we deliver superior quality and competitive pricing compared to generalist retailers. Our customer service team possesses deep mechanical knowledge, ready to assist you with queries on splines, ABS rings and assembly. Trust a specialist that truly understands your BMW 3 – choose CVJoint24 for dependable components and long-lasting driving dynamics.

Frequently Asked Questions about Outer CV joints for BMW 3

How do I know if the outer CV joint on my BMW 3 needs replacing?

The most common sign is a clicking noise when turning, especially under acceleration at low speeds. If the sound disappears when driving straight ahead, it is almost certainly a worn outer CV joint.

Can I replace just the CV boot if the joint still sounds fine?

Yes, if you catch a split CV boot early and the joint has not started to make noises or vibrate, thoroughly cleaning the joint, applying fresh grease and fitting a new boot can be sufficient.

Does the same outer CV joint fit all BMW 3 models?

No, CV joints vary depending on the engine, model year and whether the car is equipped with xDrive. Always select your car's make, model and engine to find the exact part for your vehicle.

What is included when I buy an outer CV joint from you?

Typically, the kit includes the CV joint itself, a new CV boot, grease, clamps, and any required circlip or centre bolt, depending on what your specific BMW 3 requires.

Is it difficult to replace an outer CV joint on a BMW 3 yourself?

It requires proper tools and some mechanical experience. You will need to detach the wheel hub carrier and sometimes remove the drive shaft for access. We recommend consulting a workshop manual if you are unsure.

What does your fitment guarantee mean?

It means that if you select your vehicle's make, model and engine variant and order the recommended part, we guarantee that it will fit your car physically and technically.